The Acer IPIMB-AR (Rev 1.02A) is a micro-ATX motherboard commonly found in pre-built desktop systems like the Gateway DX4870, Acer Predator G3620, and Acer Aspire M1935. Since Acer does not typically release service manuals for these proprietary boards to the public, the following report compiles technical specifications and layout details from verified database archives and community documentation. Core Specifications Form Factor: Micro-ATX (max 244 x 244 mm). Chipset: Intel B75 Express (Panther Point). Socket: LGA 1155 (Socket H2) supporting 95W max CPUs.
Memory: 4 x 240-pin DDR3 DIMM slots; supports up to 16GB (some sources suggest 32GB) of Dual Channel 1333 MHz non-ECC unbuffered memory. CPU Support
The board supports 2nd Gen (Sandy Bridge) and 3rd Gen (Ivy Bridge) Intel processors: Core i7: 3770(K), 2700, 2600(K) Core i5: 3570(K), 3450, 3330, 2500, 2400, 2300 Core i3: 3240, 3225, 3220 Pentium/Celeron: Various Ivy and Sandy Bridge models. Expansion & Storage Slots:
1 x PCIe x16 (v3.0 with Ivy Bridge; v2.0 with Sandy Bridge). 3 x PCIe x1 (v2.0). Storage Interface:
2 x SATA III (6 Gb/s) — typically colored differently from SATA II. 4 x SATA II (3 Gb/s). I/O Ports & Internal Headers Rear Panel Ports: 1 x HDMI and 1 x VGA for integrated Intel HD graphics. 2 x USB 3.0 (blue) and 4 x USB 2.0 (black). 1 x RJ45 Gigabit LAN (Intel). Dual PS/2 ports for keyboard (purple) and mouse (green). Audio I/O jacks (Headphone/Microphone). Internal Headers: Power: 24-pin ATX main power and 4-pin ATX 12V CPU power.
Front Panel: Standard header for Power Switch, Reset Switch, Power LED, and HDD LED. Cooling: 1 x 4-pin CPU Fan and 1 x 3-pin System (Rear) Fan.
Extra: Front Audio header, 2 x USB internal headers, and a Clear CMOS jumper. acer ipimbar rev 102a manual top
Acer IPIMB-AR (Rev 1.02A) is a micro-ATX motherboard commonly found in pre-built systems like the Gateway DX4870 Acer Predator G3620
. Because it was manufactured primarily for OEM (Original Equipment Manufacturer) use, finding a traditional "retail" manual is difficult; most documentation is tucked away in broader system user guides or community-created specs. Draft Story: The Orphaned Board The green PCB of the IPIMB-AR Rev 1.02A
sat on the workbench, a "hand-me-down" from a gutted Gateway tower. Without a proper manual to guide the way, connecting the front panel headers felt like defusing a bomb in the dark.
A quick short of the power pins with a screwdriver—the classic "poor man's power button"—finally coaxed the Ivy Bridge i5
to life. It was a stubborn piece of tech, famously picky about modern GPUs like the GTX 970, but for a budget "workhorse," it still had life in its four DDR3 slots. Technical Breakdown (The "Manual" Facts)
If you are trying to rebuild or troubleshoot this board, here are the key specifications sourced from various technical databases: Socket & Chipset: The Acer IPIMB-AR (Rev 1
LGA 1155 (Socket H2) supporting Sandy Bridge and Ivy Bridge CPUs (Core i3/i5/i7). Intel B75 Express. 4 slots for DDR3 SDRAM, supporting up to (though some databases suggest up to 32GB). Expansion: 1x PCIe x16 (Version 3.0 supported with Ivy Bridge CPUs). 3x PCIe x1 slots. 1x SATA III (6.0 Gb/s) — typically the colored port. 5x SATA II (3.0 Gb/s). Rear Ports:
1x HDMI, 1x VGA, 2x USB 3.0, 4x USB 2.0, and Gigabit Ethernet. Common Troubleshooting Tips
If you’ve landed here searching for "Acer IPIMBAR Rev 102A manual top," you’re likely staring at a bare motherboard trying to figure out where the power switch, HDD LED, or reset button connects. You’re not alone.
The term "top" in your search usually refers to the top-down layout diagram or the front panel (F_Panel) header pinout—the most critical part of the manual for anyone building or repairing a PC.
Here’s the reality: Acer does not publicly release detailed consumer manuals for proprietary motherboards like the IPIMBAR. However, you don’t need the full 200-page document. You need two specific things: the front panel pinout and the BIOS jumper location.
In the context of “acer ipimbar rev 102a manual top” , “TOP” refers to the top-down component layout diagram—a crucial graphic showing: Acer IPIMBAR Rev 102A: Finding the "Top" Manual
CLR_CMOS or JBAT1).Without this “top” diagram, changing RAM or resetting the BIOS becomes guesswork.
On the Acer IPIMBAR Rev 102A, the front panel header is typically a 9-pin (or 10-pin with one missing) block located on the bottom-right corner of the board.
Here is the standard "top" layout for that header (viewed from above, with the board mounted in a case):
| Pin | Signal | Pin | Signal | | :--- | :--- | :--- | :--- | | 1 | Power LED (+) | 2 | Power LED (-) | | 3 | Power Switch (+) | 4 | Power Switch (-) | | 5 | HDD LED (+) | 6 | HDD LED (-) | | 7 | Reset Switch (+) | 8 | Reset Switch (-) | | 9 | Empty / Key (No pin) | 10 | +5V or NC |
Pro tip: Pins 1-8 are active. Pin 9 is often missing to prevent incorrect orientation. The power button only needs pins 3 & 4 (polarity doesn’t matter for the switch).
To summarize your search for acer ipimbar rev 102a manual top:
CLR_CMOS1), front panel power pins (6 & 8), and BIOS recovery (Ctrl+Home).Final tip: Bookmark this page or save the service guide PDF. The “top” diagram is your only map to repairing or upgrading this aging but reliable Acer motherboard.