Adjustment Program Epson Xp 313 Top -
Epson XP-313 Adjustment Program — Informative Guide
Step-by-Step Guide to Reset Epson XP-313 Using the Adjustment Program (Top)
Follow these instructions carefully. Do not skip any step.
Final recommendation
For the Epson XP-313, the adjustment program is a last resort. First try:
- Turning off printer, unplugging 30 sec.
- Pressing OK + Stop + Power to enter service mode (not always possible on this model).
If you get the “Service required” message, the adjustment program is your only fix – but only after you’ve physically dealt with the waste ink pads (cleaned or replaced them). Otherwise, ink will flood your desk.
Would you like a guide on how to safely access and clean the waste ink pads on the XP-313?
Epson XP-313 Adjustment Program (also known as a "Resetter") is a specialized maintenance utility used to service Epson XP-313 printers. It is primarily designed to resolve "Service Required" errors by resetting the internal waste ink pad counters. Core Functionality adjustment program epson xp 313 top
The adjustment program provides access to hidden maintenance settings usually reserved for certified technicians. Waste Ink Counter Reset
: The most common use. It resets the "Main Pad Counter" and "Platen Pad Counter" back to 0% after they have reached their safety limit. Print Quality Calibration
: Includes tools for head cleaning (weak, middle, and strong), ink charging, and printhead alignment to fix blurry output. Technical Settings
: Allows for EEPROM data copying, Top Margin adjustment, Bi-D (bi-directional) adjustment, and USB ID input. Key Technical Specifications Turning off printer, unplugging 30 sec
How to Download Epson Adjustment Program? #911488 - Ask Extension
This guide assumes you are replacing the scanner unit, fixing a broken hinge, or correcting a “Printer Cover Open” error.
Common Error Codes Resolved by the Adjustment Program
| Error Code | Meaning | Can the Top Program Fix It? | |------------|---------|-----------------------------| | 0x69 | Waste ink pad counter full | Yes – Primary function | | 0x9A | EEPROM CRC error | Yes – Reset EEPROM | | 0x50 | Head temperature anomaly | Sometimes – Head ID reset | | 0x7A | Main pad counter full | Yes | | 0xFD | Initial ink charge incomplete | Yes – Run initial fill routine |
1. What is the "Service Required" Error?
Before diving into the software, it is important to understand the hardware issue. Epson printers are designed with a waste ink pad counter. Every time the printer cleans its print heads, a small amount of ink is flushed into these absorbent pads at the bottom of the printer. If you get the “Service required” message, the
After a certain number of cleaning cycles (printed pages), the printer's internal counter reaches a preset limit. To prevent ink from overflowing onto your desk or inside the mechanics, the printer stops working and displays:
"The Printer's Ink Pads are at the end of their service life. Please contact Epson Support."
The Adjustment Program is the software tool used to reset this counter back to zero, allowing the printer to function again.