To install AnTuTu Benchmark on your Allwinner H313 device (like an X96Q or Tanix TX1), you must sideload the app because it is typically not available on the Google Play Store for these devices. 📥 Installation Steps
Download the APKs: Use a browser on your TV box to visit the official AnTuTu website or a trusted mirror like APKMirror or Uptodown.
Get both files: You need to install two separate apps for a full test: AnTuTu Benchmark (the main app).
AnTuTu 3D Bench (Lite): Since the H313 is a budget chip, ensure you download the "Lite" version of the 3D benchmark to avoid crashes.
Enable Unknown Sources: Go to Settings > Security & Restrictions and toggle on "Unknown Sources" for your browser or file manager. allwinner h313 antutu install
Install: Open your downloads folder, click the APKs, and follow the prompts. 🚀 Expected Performance
The Allwinner H313 is a low-end, quad-core Cortex-A53 processor designed for 4K streaming efficiency rather than raw power.
Average Score: Roughly 90,000 – 140,000 points on AnTuTu v10.
GPU: Mali-G31 MP2 (supports OpenGL ES 3.2), which helps it complete the graphics test where older chips might fail. To install AnTuTu Benchmark on your Allwinner H313
Best Use: Media playback (YouTube, Netflix) and local 4K@60fps video decoding.
The Ultimate Android TV Box for 4K Streaming and Voice Control?
Report: Installing and Benchmarking AnTuTu on Allwinner H313 Platforms
Executive Summary Installing a working version of AnTuTu on a device running the Allwinner H313 chipset is not a straightforward "download and install" process. The H313 is an entry-level SoC (System on Chip) typically found in low-cost Android TV boxes and industrial tablets. Due to the architecture of these devices (often running Android TV OS rather than standard Android Tablet OS) and the wide variation in firmware quality, users often face compatibility errors, crashing, or installation failures. This report details the installation methods, troubleshooting steps, and expected performance metrics for the Allwinner H313. Error: Antutu Crashes During 3D Test Cause: The
Cause: The Mali-G31 driver on Allwinner’s kernel is outdated.
Fix:
| Problem | Solution | |---------|----------| | Antutu crashes on start | Clear app data → Settings → Apps → Antutu → Storage → Clear data. | | 3D test fails (black screen) | GPU driver bug. Try Antutu Lite or Geekbench 5 instead. | | “Test cancelled” mid-run | Disable any screen saver / power saving mode. | | Score much lower than expected | Close background apps. Reboot the box. Ensure it’s not overheating. |
Note: Many cheap H313 boxes use fake RAM/storage specs (e.g., reporting 4 GB but having only 1 GB). AnTuTu will reveal the real hardware.
There are two primary methods to install AnTuTu on H313 devices.
Since the H313 is often used in "kiosk" or TV devices, you must allow installation from unknown sources.