The Amada Pega 357 user manuals are essential technical documents that provide a comprehensive guide for the operation, maintenance, and programming of this 33-ton mechanical turret punch press. Manual Overview & Structure
The documentation for the Pega 357 is typically divided into several specialized guides rather than a single book: 116410-PEGA-357 (04P-C) Parts List (Feb-1989 Ref. 16126)
The Amada Pega 357 is a 33-ton CNC turret punch press typically paired with a Fanuc 04PC control unit. While the full proprietary manuals are generally obtained through Amada Support or authorized resellers, the following summary provides the core technical and operational information found within standard user documentation. 1. Technical Specifications Standard manuals for the list the following machine capabilities:
Press Capacity: 30 or 33 tons (depending on exact model year).
Max Sheet Size: 50" x 72" (up to 50" x 144" with auto-repositioning). Max Material Thickness: 0.25" (6.35 mm) mild steel.
Turret Stations: Typically 58 stations (including 2 auto-index stations). Hit Rate: Up to 350 hits per minute (HPM) at a 1" pitch.
Positioning Speed: Approximately 2,795 inches per minute (70 m/min). 2. Core Manual Sections amada pega 357 user manual
An Amada user manual is typically divided into several functional guides: Amada Support Manuals | Lapis Services Incorporated
The Amada Pega 357 User Manual is an indispensable technical guide for operators managing this 33-ton CNC turret punch press. It transitions from standard pre-installation protocols to deeply technical diagnostic tables, making it essential for both new setups and long-term maintenance. Manual Content Overview
Operational Fundamentals: Covers the core mechanics of the triple-track turret and the Fanuc-based 04PC Control system.
Technical Specifications: Clearly defines the machine's limits, such as its 50" x 72" traverse and maximum sheet capacity of mild steel.
Troubleshooting & Diagnostics: Includes critical diagnostic tables (organized by address) to decode machine signals and lights.
Maintenance Procedures: Provides essential instructions for lubrication intervals, air pressure requirements (typically 80 PSI), and tool station alignment. User Experience & Utility AMADA TURRET PEGA 357M MANUAL The Amada Pega 357 user manuals are essential
Title: A Necessary Compass in a Complex Landscape – Review of the Amada Pega 357 User Manual
Rating: ★★★★☆ (4/5)
For anyone operating or maintaining an Amada Pega 357 punch press, the user manual is not just a book—it is the bible of the machine. Amada machines are renowned for their durability and precision, but they are also complex, industrial beasts. The user manual reflects this duality: it is dense, comprehensive, and absolutely essential, though it can be intimidating for the uninitiated.
Here is a breakdown of what makes the Pega 357 manual a vital resource, along with its few shortcomings.
In 2025, most shops want a digital copy of the Amada Pega 357 user manual. Here is the reality check:
Do not rely on a scanned PDF that is missing fold-out schematics. The hydraulic and electrical diagrams are often double-page spreads. If your scan cuts off the right edge, you cannot trace circuits. Paper manual: Best for the machine’s immediate area
The PEGA 357 uses Fanuc’s punching-specific G-codes. The manual provides a quick reference:
It also explains the proprietary Amada “Punching Cycle” with dwell times at bottom dead center.
For maintenance staff, the manual includes full schematics. You’ll need these to troubleshoot:
Finding a legitimate manual can be challenging, as Amada no longer produces paper copies for this legacy model. Here are the most reliable sources:
A comprehensive table of Fanuc alarms (e.g., "OT0500" for overtravel, "SV000" for servo error) and hydraulic alarms (low pressure, high temperature) is provided.