Aovo Pro: Firmware B-01.0.11k Link Download

B-01.0.11k is a sought-after version for the Aovo Pro electric scooter, primarily used to bypass factory speed limits and unlock a potential top speed of up to 28–30 mph (45 km/h)

. While the official AovoPro app has removed the ability to select this specific firmware, users frequently turn to alternative applications to access it. How to Access and Install B-01.0.11k Because the stock AovoPro app

(black icon) often hides this version, the community-recommended method involves using the (blue icon) or specialized tools. Download 365GO : Install the on your device. The "10% Glitch" Method Connect your scooter and go to Settings > Firmware Upgrade > Available Version B-01.0.11k

is not visible, some users load a different version (like ...13) and force-close the app once the update reaches roughly

Reopen the app; the scooter should remain in "upgrade mode," often causing B-01.0.11k to appear in the "Available Version" list. Complete the Flash B-01.0.11k and allow the update to finish completely. Unlock Speed : Once installed, navigate to Advanced Settings > Speed Limit Value to set the new maximum. Key Considerations & Risks Lights Bug

: This specific firmware version is known for a bug where the physical scooter button may no longer control the lights. In this case, lights must be toggled via the AovoPro app Hardware Limits

: While the software may display 45 km/h, the actual speed is limited by the 36V battery and motor. Most users report a realistic top speed of 19–22 mph (30–35 km/h) under load. Warranty & Safety

Aovo Pro firmware B-01.0.11k is a legacy version of the scooter's operating software, widely discussed in community forums for its unique "speed hack" capabilities. While officially superseded, it remains sought after by users looking to bypass factory speed limits on M365 clone models. Firmware Overview Aovo Pro Firmware B-01.0.11k Download

The B-01.0.11k firmware is primarily used as a "speed-unlock" tool for the Aovo Pro M365 clone. Top Speed Unlocking

: Users report that installing this specific version allows the speed limit to be adjusted up to 28 mph (approx. 45 km/h) within the advanced settings of compatible apps. Known Issues

: A common bug in this version causes the physical headlight button on the scooter to stop working, requiring users to turn lights on/off exclusively through the mobile app. Risk of "Fake" Versions

: Some community members warn that certain "11k" versions circulating online only change the speedometer display to show higher speeds without actually increasing the motor's physical output. How to Download & Install Aovo Pro does not host direct

firmware files for manual flashing. Updates are handled through specific mobile applications. Compatible Apps 365GO (Blue Icon)

: Frequently cited as the most reliable way to find B-01.0.11k under the "Available Version" list. AovoPro (Official Black Icon) : Newer versions of the official AovoPro App

often omit these legacy firmware options to comply with safety regulations. Installation Process Download the app from the Google Play Store tap Update .

Connect to the scooter via Bluetooth (default password is often Navigate to Settings > Firmware Upgrade > Available Version B-01.0.11k to begin the flash. Security & Safety Warnings AOVO Pro no firmware available in app. : r/ElectricScooters 25 Dec 2020 —

This guide includes the download source, update methods, changelog details, and troubleshooting tips.

7. User Reviews & Community Feedback on B-01.0.11k

From multiple forum threads (2023–2025):

| Positive | Negative | |----------|----------| | Smooth acceleration curve | Cruise control engages too easily | | No sudden power cut at low battery (18V cutoff instead of 21V) | Speed capped at 22 km/h (not 25 or 32) | | Compatible with generic 36V batteries | Sometimes triggers E4 error on Aovo ES80 | | Works with both thumb and twist throttles | BLE connection unstable on Android 13+ |

One user reported: “After flashing B-01.0.11k on my Aovo ES90, error 10 (communication) disappeared. But max speed dropped from 30 to 22 km/h — had to patch it with SHU custom firmware.”

6. How to Flash B-01.0.11k (Short Guide)

Requirements:

• Android phone with OTG support
• ST-Link V2 (for dead controllers) or BLE connection (if controller is alive)
• ScooterHacking Utility or DownG app

Steps:

1. Charge scooter to >60% battery.
2. Turn on scooter, enable Bluetooth (keep ON).
3. Open ScooterHacking Utility → Connect → Flash Firmware.
4. Load the downloaded B-01.0.11k.bin file.
5. Start flash (takes ~90 seconds). Do not disconnect.
6. Power cycle scooter (off → wait 30s → on).
7. Test basic functions (throttle, brake, lights) before riding.

Installation Process

1. Enable Developer Options on your Scooter (if needed)
   Some Aovo Pro units require a hidden menu: turn on headlights, press throttle 5 times rapidly, then hold brake + throttle for 3 seconds. The display will flash “dON” (developer ON).

2. Connect via Bluetooth

   • Open DownG.
   • Tap “Connect” – your scooter appears as “AovoPro_XXXX”.
   • Default pairing code: 000000 or 123456.

3. Backup Current Firmware

   • In DownG, go to Firmware > Backup.
   • Save the current .bin file to your phone.
   • This allows you to revert if anything fails.

4. Load B-01.0.11k

   • Tap Flash Firmware > Local File.
   • Navigate to the downloaded B-01.0.11k.bin.
   • Confirm the firmware version matches your scooter’s hardware (BLE and DRV files must be compatible).

5. Start Flashing

   • Keep your phone 1 meter away from the scooter.
   • Press Start – DO NOT touch the scooter’s brake or throttle during the 2-3 minute process.
   • Wait for “Flash Complete” and a reboot sound from the scooter.

6. Post-Install Check

   • Power cycle the scooter (off for 10 seconds, then on).
   • Check the firmware version: hold brake + throttle and turn on the display – the version shows as B-01.0.11k.

Method A: Official App (Recommended)

The easiest way to get B-01.0.11k is through the official AoVoPro app. Tap Flash Firmware &gt

1. Download the "AoVoPro" app from the Google Play Store or Apple App Store.
2. Turn on your scooter and enable Bluetooth on your phone.
3. Connect to the scooter via the app.
4. Navigate to Settings > Firmware Update.
5. If B-01.0.11k is available for your region/hardware batch, tap Update.