Asmaco Spray Paint Msds Pdf 213

The Asmaco Spray Paint Material Safety Data Sheet (MSDS) outlines critical safety and technical details for its quick-drying, acrylic-based aerosol products. This document is essential for professionals and DIY users to ensure proper handling and minimize health risks. Key Product Specifications

Composition: Common hazardous ingredients include Xylene isomers, Acetone, Methoxy propanol, Butane, and Propane. Physical Properties: Appearance: Coloured liquid in an aerosol can. Flash Point: (highly flammable).

Drying Time: Surface dry in 6–8 minutes; hard dry in minimum 1 hour. VOC Content: Critical Safety Guidelines Storage: Store at temperatures between 0∘C0 raised to the composed with power C 35∘C35 raised to the composed with power C . Never expose to temperatures above 50∘C50 raised to the composed with power C

, as the cans contain pressurised gas and may burn or explode. Handling: Keep away from heat, sparks, open flames, and pilot lights. Do not pierce or burn the can, even after it is empty. asmaco spray paint msds pdf 213

Use only in well-ventilated areas to avoid inhaling harmful vapours. Potential Health Hazards ASMACO Spray Paint Safety Data Sheet | PDF - Scribd

I cannot directly provide or retrieve the specific PDF file for "Asmaco Spray Paint MSDS Sheet 213" because I don’t have live access to external document databases or the manufacturer’s private servers.

However, I can tell you where to find it and what the MSDS for Asmaco Spray Paint (likely product code 213) typically contains. The Asmaco Spray Paint Material Safety Data Sheet

SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION

8.1 Control Parameters

  • Refer to local regulations for Occupational Exposure Limits (OEL) for Zinc Chromate, Xylene, and Solvents.

8.2 Exposure Controls

  • Respiratory Protection: Use a properly fitted NIOSH-approved air-purifying respirator if ventilation is insufficient.
  • Hand Protection: Wear chemical-resistant gloves (e.g., Nitrile rubber).
  • Eye Protection: Safety glasses with side shields or goggles.
  • Body Protection: Protective work clothing.

Checklist before you spray (printable)

  • Area ventilated? Yes/No
  • No ignition sources within 10 m? Yes/No
  • PPE available (respirator, goggles, gloves)? Yes/No
  • Fire extinguisher on hand? Yes/No
  • Spill kit present? Yes/No
  • Cans stored upright and cool? Yes/No
  • Pregnant persons evacuated from area? Yes/No

SECTION 10: STABILITY AND REACTIVITY

  • Stability: Stable under recommended storage conditions.
  • Conditions to Avoid: Heat, flames, sparks, and direct sunlight.
  • Materials to Avoid: Strong oxidizing agents, strong acids, strong bases.

Key hazards explained (plain language)

  • Extremely flammable: contents and vapors ignite easily; aerosol propellants increase risk of rapid fire spread and possible explosions if cans rupture in heat.
  • Inhalation risk: solvent vapors can cause dizziness, drowsiness, headaches, nausea, and at high concentrations, loss of consciousness; chronic exposure can damage the nervous system.
  • Skin/eye irritation: direct contact can dry and crack skin; splashes irritate eyes.
  • Reproductive toxicity: some formulations list ingredients linked to possible harm to fertility or the unborn child—pregnant or planning-to-be should avoid exposure.
  • Environmental harm: solvents can harm aquatic organisms and persist; aerosols can contribute to VOC emissions.

Section 13: Disposal Considerations

  • Depressurize fully. Dispose as hazardous waste per local regulations.

Troubleshooting & myths

  • Myth: “A little venting is enough.” Reality: solvent vapors can accumulate; use forced ventilation and monitor odor—if you smell it strongly, ventilation is inadequate.
  • Myth: “When the can seems empty it’s safe to puncture.” Reality: residual propellant can still explode—dispose properly.

SECTION 2: HAZARDS IDENTIFICATION

2.1 Classification of the Substance or Mixture Refer to local regulations for Occupational Exposure Limits

  • Physical Hazards: Aerosol Category 1 (Extremely Flammable).
  • Health Hazards: Skin Irritation Category 2; Eye Irritation Category 2; Specific Target Organ Toxicity (Single Exposure) Category 3 (Narcotic effects).
  • Environmental Hazards: Hazardous to the aquatic environment.

2.2 Label Elements

  • Signal Word: DANGER
  • Hazard Statements:
    • H222: Extremely flammable aerosol.
    • H229: Pressurised container: May burst if heated.
    • H315: Causes skin irritation.
    • H319: Causes serious eye irritation.
    • H336: May cause drowsiness or dizziness.
  • Precautionary Statements:
    • P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
    • P211: Do not spray on an open flame or other ignition source.
    • P251: Do not pierce or burn, even after use.
    • P261: Avoid breathing dust/fume/gas/mist/vapours/spray.

SECTION 3: COMPOSITION / INFORMATION ON INGREDIENTS

3.2 Mixtures

  • Zinc Chromate: 10 - 30% (Carcinogenic Category 1B).
  • Butyl Acetate: 10 - 20% (Flammable Liquid).
  • Xylene: 10 - 20% (Flammable Liquid).
  • Propane/Butane (Propellant): 20 - 40% (Extremely Flammable Gas).

(Note: Exact percentages are often withheld as trade secrets; ranges are provided above for drafting purposes.)