The Autocom 2020.23 VM EN (Virtual Machine English) by Fantomel is a pre-configured diagnostic environment for multi-brand vehicle scanning. It is widely recognized in automotive forums for being an "original" version detached from the hardware USB dongle, allowing it to run on standard hardware via virtualization. Key Features of the VM Version
Ready-to-Use: This version is pre-installed on a virtual machine (VMware), eliminating complex installation or activation steps for the user.
English Interface: While the software supports multiple languages, the "VM EN" specific release by Fantomel typically features an English Windows environment for broader compatibility.
Vehicle Support: Includes databases for Cars and Trucks with support for vehicle models up to approximately 2020.
Hardware Compatibility: Works with CDP+ and Delphi DS150E diagnostic interfaces, though performance can vary between single-board and double-board hardware revisions. Installation & Launch Steps
To use the Fantomel updated VM version, users typically follow these steps:
Software: Ensure you have VMware Workstation (version 12 or newer) installed on your PC.
Extraction: Unzip the downloaded archive (often 2020.23 VM EN.zip) using a tool like 7-Zip.
Loading the VM: Open VMware and select "Open a Virtual Machine," then browse to the 2020.23.vmx file.
The "I Moved It" Prompt: When launching the VM for the first time, you must select "I Moved It" to preserve the pre-configured activation.
Device Connection: Connect your diagnostic probe via USB and ensure VMware is set to "Connect (Disconnect from Host)" so the virtual machine can see the hardware. Critical Tips
Firmware Updates: If the software prompts that the "Firmware is out of date," you can update the probe's firmware within the VM's hardware settings, but ensure you have a stable 12V-24V power supply to the adapter to avoid "bricking" it.
Activation Issues: Unlike the "Full" non-VM version which requires a system date change to December 15, 2021, the VM version generally does not require date manipulation as it is already activated.
The flickering monitors of "The Gearhead's Den" cast a cool blue light over Elias’s grease-stained workbench. In the world of independent car mechanics, Elias was known for two things: an uncanny ability to hear a misfire from three blocks away and his reliance on a legendary piece of digital craftsmanship— Autocom 2020.23
For years, that software had been his second pair of eyes, scanning ECUs and clearing fault codes that left newer shops scratching their heads. But tonight was different. He wasn't just using the standard version; he had finally secured the
VM EN (Virtual Machine English) edition, updated by the mysterious "Fantomel." The Ghost in the Machine
In the automotive software underground, "Fantomel" was a name whispered with reverence. While official updates often locked older hardware out, Fantomel’s releases were like master keys. Elias clicked the icon, and the virtual machine hummed to life on his rugged laptop.
"Let's see what you’ve got," Elias muttered. He was working on a 2019 hybrid that had baffled the local dealership. The interface was familiar but felt sharper—refined. The Flight Recorder function, a staple of the Autocom CARS software
, was primed to capture real-time data from the vehicle's heartbeat during a test drive. The Diagnostic Dance As the progress bar for the System Scan
moved across the screen, Elias watched the software communicate with parts of the vehicle the dealership's scanners had ignored. Identification
: The software pulled the VIN in seconds, recognizing the exact model and fuel configuration. The Deep Dive autocom 202023 vm en by fantomel updated
: It didn't just read the surface errors. It dug into the hybrid battery's control module, displaying reference values side-by-side with live data—a feature of the Guided Diagnostics
Suddenly, a red flag appeared. A minor invalid value in the regenerative braking component was triggering a cascade of "ghost" codes across the entire system. With a few clicks, Elias performed an Activation Test
, listening for the click of the solenoid that the software had commanded to fire. He cleared the fault codes, performed a service reset, and the hybrid's dashboard, once lit up like a Christmas tree, went dark.
Elias leaned back, the silence of the shop broken only by the cooling fans of his laptop. The "Fantomel" update hadn't just fixed a car; it had proven that in a world of planned obsolescence, a well-crafted tool—and the community that keeps it alive—could still outrun the newest machines on the road. for running this specific virtual machine build Autocom 2020.23 Download - AliExpress
Autocom 2020.23 VM by Fantomel: The Updated Diagnostic Powerhouse
For automotive technicians and DIY enthusiasts, having reliable diagnostic software is the difference between a quick fix and hours of guesswork. One of the most sought-after releases in the aftermarket community is Autocom 2020.23 VM EN by Fantomel.
This updated Virtual Machine (VM) build offers a stable, "plug-and-play" environment for those using Delphi or Autocom hardware. What is Autocom 2020.23 VM by Fantomel?
Autocom is a professional multi-brand diagnostic software used to read fault codes, view live data, and perform service functions (like DPF regeneration or brake bleeding) on cars and trucks.
The Fantomel release is a pre-configured Virtual Machine. Instead of a complex, error-prone installation on your primary Windows OS, you simply run this version through VMware Player. This approach bypasses common issues like driver conflicts, missing .NET frameworks, or installation blocks. Key Features of the 2020.23 Update
Extended Vehicle Database: Covers models up to late 2020 and some early 2021 vehicles, including brands like BMW, VAG, Ford, Mercedes, and Asian manufacturers.
Generic OBD Improvements: Faster communication protocols for quicker scanning.
Stability Fixes: This specific "Updated" version addresses previous bugs where the software might hang during a full system scan (ISS).
Integrated ISS (Intelligent System Scan): Scans all vehicle ECUs simultaneously to provide a complete health report. Why Use the VM (Virtual Machine) Version?
Many users prefer Fantomel’s VM build over "native" installs for several reasons:
Security: Running software in a VM keeps your host computer’s operating system clean.
Ease of Setup: There is no need to manually activate files or patch directories. You just open the VM and the software is ready to go.
Compatibility: It allows you to run 2020.23 on Windows 10 or 11, even if the underlying software was originally optimized for Windows 7. How to Get Started To use this version, you typically need:
Hardware: A high-quality single-PCB (Printed Circuit Board) VCI (like a Delphi DS150E or Autocom CDP+). Software: The VM image file provided by Fantomel.
VMware Player: The free version of VMware is usually sufficient to boot the image. Important Installation Tip
When you first launch the VM in VMware, it will ask if you "Moved it" or "Copied it." Always select "I Moved It" to ensure the hardware IDs and activation keys remain intact. Final Verdict The Autocom 2020
The Autocom 2020.23 VM EN by Fantomel Updated version remains one of the most reliable diagnostic tools for older and mid-range vehicles. It balances a user-friendly interface with deep diagnostic capabilities, making it a "must-have" for any digital toolbox.
To prepare the Autocom 2020.23 VM (Virtual Machine) by Fantomel, follow these specific steps to ensure successful setup and device communication: ⚙️ Initial Virtual Machine Setup
Software: Use VMware Workstation 12 or higher (Version 17 is recommended for newer Windows builds).
Open File: Navigate to the extracted folder and select the 2020.23.vmx file.
Move vs. Copy: When prompted by VMware, you MUST select "I Moved It". This preserves the pre-activated hardware ID within the VM. 🔌 Connecting Your VCI (Diagnostic Interface)
USB Connection: Connect your Autocom/Delphi adapter to your computer's USB port.
VM Assignment: In the VMware menu, go to VM > Removable Devices and select your interface (often listed as "Future Devices Autocom CDP+ USB") to "Connect (Disconnect from Host)". Software Configuration: Open Autocom within the VM. Go to Settings > Hardware Setup. Choose the USB/BT (Com-port) tab. Click Test; it should return "Test OK". ⬆️ Firmware & Performance Tips
Update Firmware: If the software prompts for an update, click Update in the Hardware Setup tab. This usually takes 2–3 minutes.
System Clock: If using a "Native" (non-VM) version, some variants require setting the system date to 15.12.2021 to bypass license errors.
Hardware: For the best results, use a single-board DS150E interface, as they generally support more protocols than double-board versions.
💡 Pro Tip: Always disable your host computer's antivirus or add the VM folder to the exclusion list, as many diagnostic "activators" are flagged as false positives. If you'd like more specific help, please share: Your VCI type (e.g., single-board or double-board)
Any specific error messages you're seeing (like "Valid license key" or "Communication error")
The Autocom 2020.23 VM (Virtual Machine) version, updated by Fantomel, is a pre-configured diagnostic environment designed for seamless vehicle troubleshooting without the complexities of manual installation. This package typically includes the Autocom Car and Truck software and is widely used with diagnostic hardware like the DS150E or Multidiag Pro. Key Features
Plug-and-Play Setup: Pre-installed on a virtual machine (VMware), eliminating hardware compatibility issues or registry conflicts on your primary OS.
Comprehensive Coverage: Includes a database for a wide range of vehicle brands and models for both light and heavy vehicles.
English Language Support: This specific release is fully localized in English for easier navigation.
Update Compatibility: Includes the ability to update your diagnostic probe/firmware to ensure it works with the latest software version. Installation & Usage Guide
Software Requirements: Download and install VMware Workstation Player and a file extractor like WinRAR.
Extract the Archive: Unzip the CDP 2020.23.rar or Autocom 2020.23.rar file provided in the Fantomel package.
Open in VMware: Launch VMware, click "Open a Virtual Machine," and select the .vmx file within the extracted folder. Read & clear fault codes Live data streaming
Crucial Step: When launching for the first time, select "I Moved It" when prompted by VMware; choosing "I Copied It" may trigger hardware ID changes that lock the software activation.
Hardware Connection: Connect your USB diagnostic interface. Ensure the USB port is redirected to the Virtual Machine rather than the host computer via the VMware "Removable Devices" menu. AI responses may include mistakes. Learn more How to install AUTOCOM 2020.23 on VMware?
Autocom 2020.23 VM EN by Fantomel is a pre-configured virtual machine release of the diagnostic software used for passenger cars and heavy-duty trucks. This updated version, distributed by the user
, is designed to be a "plug-and-play" solution that bypasses the complex activation steps required for native installations. Key Features Ready-to-Use (No Activation)
: The virtual machine comes pre-activated and "unbound" from original USB dongles, meaning you don't need to manually enter license keys or use external activators. Broad Vehicle Support
: Includes a significantly expanded database for passenger cars ( ) and heavy-duty vehicles ( ) with support for models up to the year 2020. Updated Interface
: Features a modern, completely redesigned user interface based on the original 2020 software base rather than older 2013-style modifications. Hardware Compatibility : Works with standard
(Delphi DS150E, Autocom) interfaces. It is generally more stable on double-board devices but can work on some single-board versions. System Requirements Virtualization Software : Specifically designed for VMware Workstation 12+ VMware Player BIOS Settings : Virtualization technology ( Intel VT-x ) must be enabled in your computer's BIOS/UEFI.
: Compatible with Windows 8.1 and Windows 10 (64-bit systems are recommended). Installation & Startup Steps Extract Files : Use a modern archiver like to unpack the archive to your hard drive. Open in VMware
: Launch VMware, select "Open a Virtual Machine," and navigate to the file (e.g., 2020.23.vmx "I Moved It"
: When you first power on the VM, VMware will ask if you moved or copied it. Always select "I Moved It" to preserve the pre-existing software activation. Hardware Connection
: Once the VM desktop loads, connect your VCI via USB and ensure VMware is set to connect the USB device to the virtual machine rather than the host. Firmware Update (Optional)
AutoCom 2020/23 VM EN by Fantomel: An Overview
In the realm of automotive diagnostics and repair, the AutoCom 2020/23 VM EN by Fantomel emerges as a significant tool. This software solution is designed to interface with vehicle systems, enabling comprehensive diagnostics, troubleshooting, and maintenance tasks. Developed by Fantomel, a name associated with automotive software solutions, AutoCom 2020/23 VM EN represents a versatile and powerful tool for both professional mechanics and automotive enthusiasts.
The VM runs Windows internally, but it cannot see your physical Autocom/VCI interface until you "pass it through" to the virtual machine.
Note: You may need to install the VCI drivers inside the VM if Fantomel didn't include them, but most VM releases come pre-installed with a Driver Signature Enforcement bypass.
Even with an updated version, users may encounter issues. Here’s how Fantomel’s updates address them:
| Problem | Stock Version | Fantomel Updated Version | |--------|---------------|--------------------------| | "Interface not found" error | Driver incompatibility | Pre-installed FTDI drivers; USB filter auto-setup | | Software crashes on Windows 10 | Kernel conflicts | Isolated Windows 7 VM environment | | VIN parsing failure | Outdated vehicle database | Updated definitions as of 2023 | | DPF regen fails on BMW/Mercedes | Missing security access routines | Patched DLLs allowing full access | | Bluetooth pairing drops | Timeout issues | Optimized COM port latency settings |
Stock Autocom software includes timers that disable the software after a certain period or when an internet connection is detected. Fantomel’s patch removes: