Skip to content

Bt-163 Bluetooth Driver -

is a widely used, budget-friendly USB Bluetooth audio music receiver designed to turn traditional wired speakers, car stereos, or home theater systems into wireless Bluetooth-enabled devices. It typically operates as a "plug-and-play" device, but specific drivers may be required for certain operating systems or advanced audio profiles. Device Specifications

The BT-163 is primarily an audio bridge that receives signals from a smartphone or computer and outputs them via a 3.5mm AUX jack. Bluetooth Version:

Commonly listed as V4.2 + EDR or V4.0, though some variations use older V2.1 chips. Transmission Range: Approximately 8–10 meters (32.8 ft). Profiles Supported: A2DP V1.2, AVRCP, AVDTP, HFP, and HSP. Power Source: 5V DC via a standard USB port. Data Transfer Rate: Up to 3 Mbps. Driver Installation & Compatibility

While often plug-and-play, users seeking manual driver installation can find them for various Windows versions:

This guide outlines the steps to install or update the drivers for the generic BT-163 USB Bluetooth Audio Receiver (often used for cars or speakers) on Windows operating systems, ensuring smooth connectivity for audio streaming. BT-163 Bluetooth Driver Installation Guide

The BT-163 is a "plug-and-play" device, but it often requires specific "Hands-Free" or "Stereo" audio drivers to function correctly with Windows 7, 8, 8.1, or 10. 1. Preparation Plug the BT-163 USB receiver into a USB port. Ensure your computer is connected to the internet. 2. Automatic Driver Installation (Recommended)

Open Device Manager: Right-click the Start button and select Device Manager.

Locate Device: Look under Bluetooth or Other devices. The BT-163 might appear as "Unknown device," "BTHHFENUM," or generic "Bluetooth Audio".

Update Driver: Right-click the device and select Update driver.

Search Automatically: Select Search automatically for updated driver software. Windows should detect and install the necessary drivers. 3. Manual Driver Installation (If Auto Fails)

If the automatic search fails, the device may require specific chipset drivers (often based on CSR8510 or similar generic chips).

Download: Search for "BT-163 stereo driver download" or use DriverIdentifier to locate the BTHENUM\0000110B-0000-1000-8000-00805F9B34FB driver.

Install: Extract the downloaded file (if zipped), right-click the .inf file, and select Install.

Restart: Restart your computer to complete the installation. 4. Pairing the Device

After driver installation, click the Bluetooth icon in the taskbar. Select Add a Device.

Select the BT-163 (or generic music receiver name) from the list.

Ensure audio output is set to the Bluetooth receiver in your sound settings. Troubleshooting

Driver Error/Yellow Triangle: If the device shows an error in Device Manager, right-click and choose Uninstall device, then restart the computer to allow Windows to reinstall it automatically. bt-163 bluetooth driver

No Sound: Check that the BT-163 is plugged into a powered USB port (car stereo, charger, or PC) and that the 3.5mm jack is connected to the input source.

Background Noise: Some generic BT-163 receivers may have slight background noise, which is common for this price point.

If you are still having issues with this driver, could you please share: Which Windows version (7, 10, or 11) are you using?

Is the device showing a yellow warning icon in Device Manager?

What is the exact error message (e.g., "Driver not found", "Code 28", etc.)?

I can provide more specific steps, such as how to search on Google Drive for the driver. Fix Bluetooth problems in Windows - Microsoft Support

While it might seem like a small piece of software, the BT-163 Bluetooth driver

is the essential bridge between old-school hardware and modern wireless convenience. It’s the "translator" that allows a generic USB dongle to turn a non-Bluetooth speaker or car stereo into a high-functioning receiver. The Role of the Driver

The BT-163 is a popular, budget-friendly USB Bluetooth adapter. For the hardware to work, your operating system (Windows, macOS, or Linux) needs a driver to interpret the signals being sent over the airwaves. Without this driver, the device is just a piece of plastic and metal; with it, it becomes a portal for audio streaming. Seamless Connectivity

Most modern systems are "Plug and Play," meaning they carry generic Bluetooth drivers that recognize the BT-163 instantly. However, when these drivers fail or become outdated, users experience: Stuttering audio: Poor data packet management. Pairing failures:

The "handshake" between the phone and the adapter isn't recognized. Range issues:

The software fails to maintain a stable connection over distance. The Legacy Impact The significance of the BT-163 driver lies in sustainability

. By providing a stable software interface for an inexpensive adapter, it prevents thousands of perfectly good "analog" speaker systems from ending up in landfills. It bridges the digital divide, allowing older technology to keep pace with the smartphone era. Conclusion

The BT-163 Bluetooth driver is the essential software component that allows your computer to communicate with the BT-163 USB Bluetooth Music Receiver. This compact adapter is designed to transform traditional wired speakers, car stereos, and home audio systems into wireless Bluetooth-enabled devices. Core Functionality of the BT-163 Adapter

The BT-163 receiver is primarily used for wireless music streaming and hands-free calling. It typically operates using Bluetooth 2.1 + EDR or Bluetooth 4.0 technology, supporting the A2DP V1.2 profile for high-quality stereo audio playback.

Wireless Range: It offers a working distance of approximately 10 meters (32.81 feet).

Power Source: The device is powered via a 5V DC USB port, meaning it can be plugged directly into a speaker’s USB port or a standard USB wall charger for power. is a widely used, budget-friendly USB Bluetooth audio

Audio Output: It features a 3.5mm AUX interface, allowing it to connect to speakers or car stereos using a standard audio cable. How to Install the BT-163 Bluetooth Driver

For most modern operating systems like Windows 10 and 11, the Go to product viewer dialog for this item.

is a plug-and-play device, meaning the system should automatically recognize it and install the necessary generic drivers. However, if the device is not detected, follow these manual installation steps:

BT-163 Bluetooth Music Receiver is a ubiquitous, budget-friendly device designed to add wireless audio capabilities to non-Bluetooth speakers, car stereos, and home theater systems. Despite being widely available, users often encounter confusion regarding its "drivers" and installation. 1. Device Overview

It acts as a bridge, receiving audio via Bluetooth (often version 5.0 or 5.1) and outputting it through a 3.5mm AUX jack or USB interface. Power Source:

Most models are powered via a USB port, though some include a small internal battery for portable use. Compatibility:

Works with smartphones, tablets, and laptops to stream music to analog audio systems. 2. The "Driver" Misconception Unlike internal PC hardware, the BT-163 typically does not require external drivers to function. It is a "Plug-and-Play" device. Receiver Mode:

When used with a speaker, the driver is actually the standard Bluetooth stack on your phone or laptop. USB Audio:

If plugged into a PC's USB port for power, the PC may recognize it as a generic USB power device or a simple audio interface, for which Windows and macOS have built-in generic drivers. 3. Installation & Pairing Guide To successfully set up the BT-163, follow these steps:

The BT-163 Bluetooth driver is a critical software component that allows your computer to communicate with the popular BT-163 Bluetooth audio receiver. While this device is primarily marketed as a plug-and-play USB dongle to turn wired speakers or car stereos into wireless systems, PC users often need specific drivers to ensure high-fidelity stereo audio and stable connections. What is the BT-163 Bluetooth Device? The

is a compact USB wireless audio receiver designed to bridge the gap between non-Bluetooth audio equipment and modern streaming devices. It typically features: Bluetooth Version: Often version 2.1 + EDR or 4.2. A2DP Support: Enables high-quality stereo audio streaming.

Connectivity: Powered via a USB port with audio output through a 3.5mm AUX jack. Range: Approximately 8 to 10 meters. How to Install the BT-163 Bluetooth Driver

On most modern operating systems like Windows 10 and Windows 11, the

should install automatically using generic Windows drivers. If it doesn't, follow these steps:

BT-163 Stereo Driver for Dell - Inspiron 5559 - DriverIdentifier

EP0000555623.exe. 15.46.8.143. 2013-04-29. 8.34 MB. WIN8, WIN81, WIN10/32bits. WIN8, WIN81, WIN10, WIN11/64bits. DriverIdentifier

Go to product viewer dialog for this item. is a generic Bluetooth USB dongle designed to turn non-Bluetooth speakers or car stereos into wireless receivers. Because it is a "Plug and Play" (PnP) hardware device, it usually does not require a dedicated manual driver installation on modern operating systems like Windows 10 or 11. 1. Core Functionality & Driver Basics Blog Title: BT-163 Bluetooth Dongle: How to Find,

functions as a Bluetooth Audio Receiver. When you plug it into a USB port (for power) and connect the 3.5mm jack to your speaker, it identifies as a generic audio device.

Driver Type: Standard Bluetooth Enumerator / USB Audio Class driver.

Installation: In most cases, Windows automatically assigns a generic driver from the Microsoft Support library.

Hardware Compatibility: It is widely used for older car head units and home theaters that lack built-in Bluetooth. 2. Troubleshooting Driver Issues If your computer or device fails to recognize the , follow these steps to reset or update the driver:

Check Device Manager: Open Device Manager, look under "Bluetooth" or "Sound, video and game controllers." If you see a yellow exclamation mark, right-click and select Update driver.

Generic Driver Selection: If Windows can't find a driver, select "Browse my computer for drivers" > "Let me pick from a list." Choose the Generic Bluetooth Radio or USB Audio Device option. Power vs. Data: Many

issues aren't driver-related but power-related. Ensure the USB port provides stable power, as many users mistake the device for a data-only dongle when it actually requires an auxiliary cable for audio output. 3. Connection & Pairing Guide

To ensure the driver is communicating correctly with your hardware: into a USB power source (the LED should flash). Connect the included 3.5mm audio cable from the to your speaker’s "Line In" or "AUX" port. Search for " " or "BT-DONGLE" on your phone or PC. If prompted for a code, the default is usually 0000. 4. Identifying Hardware Versions

If you are developing software or need deep technical specs, you can find the specific firmware version (LMP) via Intel's Device Manager steps or by checking the LMP number in the Advanced tab of the device properties to see if it supports Bluetooth 4.0, 5.0, or higher. Are you trying to connect the

to a specific operating system like Windows 7 or a Linux distribution? Update Bluetooth drivers in Windows - Microsoft Support

Blog Title: BT-163 Bluetooth Dongle: How to Find, Install, and Fix the Driver

Meta Description: Struggling to get your generic BT-163 Bluetooth adapter to work? Here’s how to find the correct driver, install it on Windows 10/11, and fix pairing issues.

If you’ve just bought a small, generic BT-163 Bluetooth USB dongle, you might have expected it to work instantly. Usually, Windows will grab a generic driver, but sometimes—nothing happens. No “Bluetooth” toggle appears, and Device Manager shows a yellow exclamation mark.

You’re not alone. The BT-163 (often sold under brand names like “ORICO,” “UGREEN,” or as a no-name adapter) typically uses a Realtek or Cambridge Silicon Radio (CSR) chip. Here’s how to get it running.

Linux (Ubuntu, Debian, Fedora)

  1. Plug in adapter and check detection:
    • Run: lsusb
    • Look for a CSR or Cambridge Silicon Radio entry (e.g., ID 0a12:0001).
  2. Ensure Bluetooth stack installed:
    • Install BlueZ and Bluetooth utilities:
      • Debian/Ubuntu: sudo apt update && sudo apt install bluez bluez-tools pulseaudio-module-bluetooth
      • Fedora: sudo dnf install bluez bluez-tools
  3. Start/enable service:
    • sudo systemctl enable --now bluetooth
  4. Use bluetoothctl to pair:
    • bluetoothctl
    • power on
    • scan on
    • pair
    • trust
    • connect
  5. If adapter stuck in “no adapter”:
    • Check kernel driver: dmesg | grep -i bluetooth or dmesg | grep -i csr
    • Install firmware for CSR chips if needed: search package named firmware-csr or linux-firmware (varies by distro).
    • Some CSR adapters require Broadcom/CSR firmware loading via btusb; add firmware files to /lib/firmware and reload module: sudo modprobe -r btusb && sudo modprobe btusb

BT-163 Bluetooth Driver — Quick Setup & Troubleshooting Guide

Error 3: Code 10 – Device cannot start

3. The Chipset ID Method (For Experts)

If the above fails:

Method 1: How to Download the Official BT-163 Driver

Warning: Do not download drivers from "Driver Updater" pop-up ads or suspicious EXE files. The BT-163 is a generic chip; you should download the driver based on the Vendor ID (VID) or use the reference driver.

The "Missing CD" Problem

Many BT-163 adapters ship with a mini-CD. Modern PCs (especially laptops and mini-PCs) do not have optical drives.