Skip to main content

Version 1050 !!exclusive!! — Canon Service Mode Tool

Canon Service Mode Tool Version 1050 is a specialized utility designed for technicians and advanced users to perform maintenance and diagnostic tasks on specific Canon Pixma printer models. It is primarily used to resolve critical errors—such as the "Waste Ink Absorber Full" error (error code 5B00)—that normally require professional servicing. Core Functions of V1050

This portable software interacts directly with a printer's firmware while it is in "Service Mode". Its primary features include:

Ink Absorber Counter Reset: Resets the waste ink counter value to zero after cleaning or replacing physical ink pads.

EEPROM Operations: Prints or clears EEPROM data to view printer history, ROM versions, and detailed error logs.

Nozzle Checks & Deep Cleaning: Triggers maintenance cycles that are more intensive than standard user-level cleaning.

Printer Adjustments: Corrects LF/EJECT settings and left margin positioning. Compatible Printer Models

Version 1050 is an older iteration of the service tool and is most effective with legacy Canon Pixma models. Supported series typically include: MP Series: Go to product viewer dialog for this item. Go to product viewer dialog for this item. Go to product viewer dialog for this item. Go to product viewer dialog for this item. Go to product viewer dialog for this item. MG Series: iP Series: iP2700, iP3600, iP4600, iP4700, iP4800.

Note: For newer G-series or TS-series printers, later versions such as are generally required. How to Use Canon Service Tool V1050

Using the tool requires placing the printer into a specialized hardware state before running the software on a PC. Step 1: Entering Service Mode Canon service tool v2000 | Page 17 - PrinterKnowledge

Canon Service Mode Tool Version 1050 is a specialized software utility used by technicians to manage, reset, and calibrate Canon Pixma and Maxify printers. When a printer encounters hardware-level lockouts—most notably the "Waste Ink Absorber Full" error—this tool is the primary professional solution used to interface with the device's firmware. Understanding Service Mode and Version 1050

Canon printers are designed with internal counters that track ink usage. Once the waste ink pads reach their physical capacity, the printer enters a "locked" state to prevent ink leakage. While basic resets can sometimes be performed via button sequences on older models, modern Canon printers require the Service Tool to communicate via the USB interface.

Version 1050 is a legacy version of this utility. It is specifically valued for its compatibility with older Canon hardware architectures. While newer versions like V5103 or V6000 exist for the latest G-series or TS-series printers, V1050 remains a staple for maintaining older office and home setups that do not support the updated protocols of newer software. Core Functions of the Utility

The tool provides a comprehensive interface for deep-level printer maintenance:

Waste Ink Counter Reset: Clears the Main and Platen counters, allowing the printer to resume operation after the ink pads have been cleaned or replaced.

EEPROM Operations: Allows technicians to read and write the printer's non-volatile memory, which contains serial numbers, region codes, and usage logs.

Print Head Alignment: Provides a more precise calibration than the standard user-facing maintenance menu.

Ink System Cleaning: Triggers "Deep Cleaning" or "Ink Flush" cycles that are often more intensive than the options found in the printer driver.

Test Patterns: Prints specialized diagnostic grids to identify specific nozzle failures or timing strip issues. How to Prepare Your Printer for the Tool

The Service Tool cannot communicate with a printer in "Normal Mode." You must manually trigger "Service Mode" on the hardware itself before launching the software.

Power Down: Turn off the printer but leave it plugged into a power source.

The Stop/Reset Sequence: Press and hold the Stop/Reset button. canon service mode tool version 1050

Power On: While holding Stop/Reset, press and hold the Power button.

The Toggle: Release the Stop/Reset button while continuing to hold the Power button.

The Count: Press the Stop/Reset button exactly 5 times (on most models; some require 2 or 6).

Release: Release the Power button. The green light should blink and then stay solid, indicating the device is in Service Mode. Safety and Compatibility Precautions

Using Service Tool V1050 involves risks. If the wrong version is used or the process is interrupted, the printer’s logic board can become "bricked" (permanently disabled).

⚠️ USB Connection Only: These tools do not work over Wi-Fi or Bluetooth. You must use a high-quality USB A-to-B cable.⚠️ One Device at a Time: Ensure no other printers are connected to your computer to prevent the software from sending commands to the wrong hardware.⚠️ Hardware Maintenance: Resetting the digital counter does not physically empty the waste ink. If you reset the counter without cleaning or replacing the physical pads, ink will eventually leak into the printer's internal components. Troubleshooting Common Errors

If the tool displays an error code, it usually points to a connection or compatibility issue:

Error 002: The tool version is incompatible with your printer model.

Error 005: The printer was not successfully put into Service Mode.

Error 006: The printer is in Service Mode, but the software cannot find the specific port. Try a different USB port or restart the software as an Administrator.

The Canon Service Mode Tool version 1050 (also known as ServiceTool_V1050) is a legacy software utility used by technicians to perform maintenance operations on specific Canon PIXMA printer models. It is primarily used to reset the waste ink absorber counter (Error 5B00) and perform EEPROM adjustments. Software Specifications

Operating System Compatibility: Optimized for 32-bit Windows systems (XP, Vista, and 7). It generally does not function correctly on 64-bit systems; for newer OS versions, Service Tool v3400 is often recommended.

Supported Models: Compatible with older PIXMA generations, including: iP Series: iP3600, iP4600, iP4700.

MP Series: MP190, MP240, MP250, MP260, MP270, MP480, MP540, MP550, MP620, MP630, MP980. Service Mode Entry Procedure

The tool can only communicate with the printer once the hardware has entered Service Mode. The standard sequence for v1050-era models is: Power Off: Ensure the printer is off but connected via USB.

Resume + Power: Press and hold the Resume button (triangle icon), then press and hold the Power button.

Release/Press Sequence: While holding Power, release Resume. Press the Resume button twice, then release the Power button.

Verification: The Power LED should blink and then stay lit steady green. If it continues to blink or turns orange, an additional error exists that prevents Service Tool communication. Core Functions

Submission 129 - Karl May - Right to Repair - Productivity Commission

The Canon Service Tool Version 1.050 (often stylized as v1050) is a proprietary utility used by technicians to perform maintenance on Canon Pixma printers. Canon Service Mode Tool Version 1050 is a

It is most commonly sought after to reset the Waste Ink Absorber counter, which triggers an "Ink Absorber Full" error that prevents the printer from functioning. 🛠️ Core Functions

Ink Absorber Reset: Clears the internal counter for the waste ink pads.

EEPROM Operations: Reads, writes, or clears the printer's non-volatile memory.

Print Head Alignment: Performs deep cleaning and precise nozzle checks.

Model Information: Retrieves specific hardware data and region settings.

Error Logs: Displays a history of internal error codes for troubleshooting. ⚠️ Critical Compatibility Warning Version 1.050 is an older version of the tool.

Supported Models: Primarily works with older Pixma iP and MP series (e.g., iP2700, iP3600, MP250, MP270).

Error Code 002: If you try to use v1050 on a newer printer, you will likely see Error Code 002, which means the tool does not support your specific printer model .

Service Mode Required: The tool will only communicate with the printer if the device has been manually put into Service Mode (usually involving a specific sequence of holding the "Stop/Reset" and "Power" buttons). ❗ Risk Notice

Using this software incorrectly or using a version incompatible with your firmware can permanently lock (brick) the printer's mainboard. If the printer enters a "dead" state where it no longer powers on after an unsuccessful reset, the board must be physically replaced.

To help you find the right version or steps, could you tell me: What is your printer model (e.g., Pixma G3000, MG3620)?

What specific error code or light sequence are you seeing on the printer? AI responses may include mistakes. Learn more Canon Service Tool Errors during waste ink counters reset

Canon Service Mode Tool version 1050 (also known as Service Tool v1050

) is a legacy utility designed for authorized technicians to maintain and reset older Canon PIXMA and MP series printers. Primary Functions

The tool is mainly used to perform maintenance tasks that are otherwise locked out for standard users: Ink Absorber Reset

: The most common use is resetting the "Waste Ink Counter" when it reaches its limit (often indicated by error codes like 5B00 or P07). EEPROM Operations

: It can initialize the EEPROM or print detailed EEPROM information for troubleshooting. Service Test Prints

: Allows for specific diagnostic printouts to check head alignment and nozzle health. Deep Cleaning : Triggers advanced print head cleaning cycles. Supported Models

Version 1050 is specifically compatible with older generation printers, including:

: iP5200, iP5200R, iP5300, iP6000D, iP6210D, iP6220D, iP6600D, iP8500. Pro Series : Pro9000, Pro9500. : MP170, MP450. Prerequisites for Use To use the software, the printer must first be placed into Service Mode Turn off the printer. Press and hold the Resume/Cancel button (triangle icon). Press and hold the While holding Power, release and press the Service mode access : allows technicians to enter

button a specific number of times (usually 2 or 5 depending on the model).

Release both buttons; the power light should remain steady green. Critical Risks and Modern Alternatives Compatibility

: Using version 1050 on modern printers (like the G-series) will likely result in an Error Code 002 , as newer models require more recent versions such as ST5103 or ST6310 Hardware Lock

: Attempting to use the wrong version or performing an incorrect reset sequence can permanently lock the printer's mainboard. : Many versions found online (like those on Google Drive ) are unofficial and may contain malware. Google Groups Are you trying to fix a specific error code on a particular Canon printer model? How To Enter Service Mode On Canon Printer | PDF - Scribd

You're looking for information on the Canon Service Mode Tool, specifically version 1050. Here's what I could gather:

What is the Canon Service Mode Tool?

The Canon Service Mode Tool is a software utility developed by Canon Inc. to help diagnose and repair issues with their printers and other imaging devices. The tool allows technicians to access and modify printer settings, perform calibration and adjustment procedures, and troubleshoot problems.

What is version 1050?

Version 1050 of the Canon Service Mode Tool is likely a specific release of the software that offers updated features, bug fixes, and support for new printer models. Unfortunately, I couldn't find a comprehensive changelog or release notes for this specific version.

Features and capabilities

The Canon Service Mode Tool, including version 1050, typically offers a range of features, such as:

  1. Service mode access: allows technicians to enter a special service mode on Canon printers, which provides access to advanced settings and diagnostic functions.
  2. Printer configuration: enables technicians to modify printer settings, such as paper tray settings, print head alignment, and ink system configuration.
  3. Troubleshooting tools: provides tools to help diagnose and troubleshoot common issues, such as print quality problems, paper jams, and connectivity issues.
  4. Calibration and adjustment: allows technicians to perform calibration and adjustment procedures to ensure accurate print output and maintain printer performance.

Where to find the tool

The Canon Service Mode Tool, including version 1050, is typically only available to authorized Canon service technicians and may not be publicly accessible. If you're a technician looking for this tool, you may need to contact Canon's support team or seek guidance from a Canon-authorized service center.

Caution

Using the Canon Service Mode Tool or modifying printer settings without proper guidance and authorization can potentially cause issues with your printer's performance, void warranties, or even render the device unusable. It's essential to exercise caution and only use this tool under the guidance of a qualified technician or Canon support specialist.

If you have any specific questions about the Canon Service Mode Tool or version 1050, I'll do my best to help.

MAXIFY (limited)

  • iB4040, iB4050 (firmware version 1.080 or lower)

If your printer is a newer model (e.g., PIXMA TS series, TR series, G series MegaTank, or Pro-1000), Version 1050 will NOT work. You would need service tool v4.0 or higher, or Canon’s cloud-based SST.

Risks & Warnings

  • Warranty & support: Unauthorized use may void warranty or disrupt eligibility for official service.
  • Data loss: Resetting counters or firmware operations can erase configuration and usage logs.
  • Damage risk: Incorrect changes can render devices inoperable and may require professional recovery.
  • Legal/ethical: Some functions may bypass protections; use only on devices you own or are authorized to service.

Step 4: Run the Service Tool

  1. Right-click STool_V1050.exe and select Run as Administrator.
  2. A small window with a menu bar will appear. It looks nothing like a modern Canon application—it is utilitarian, with buttons like “Waste ink counter,” “EEPROM,” and “Test print.”

What’s New in Version 1050?

Version 1050 is not just a minor revision. It represents a mid-cycle update that improved compatibility and security bypasses. Key improvements over earlier versions (like 1040 or 1000) include:

  1. Expanded Printer Support: Version 1050 natively supports newer Canon models, including the PIXMA G-series (G1020, G2020, G3020), MAXIFY GX series, and certain imageRUNNER models that older tools failed to recognize.
  2. Faster Communication: The USB handshake protocol has been optimized, reducing the "timeout" errors common with Version 1045.
  3. Enhanced EEPROM Editing: Version 1050 allows direct hex editing of specific memory addresses, which is crucial for resetting absorption pads on printers with soldered EEPROMs.
  4. Bug Fixes: Resolved a critical error where the tool would freeze if the printer was in a "deep sleep" state.

PIXMA MP Series

  • MP230, MP240, MP250, MP280, MP490, MP495

1. The Evolution of the Interface

To understand Version 1050, one must look at what came before. Older Canon interfaces relied on "Service Support Tool" (SST) and proprietary hardware keys. As Canon moved toward the "Advance" platform (circa 2010-2012), the architecture shifted from strict hardware dongles to software-based authentication.

Version 1050 represents the mature stage of this shift. It was designed to run natively on modern Windows environments (moving past the legacy XP constraints of older SST versions). It bridged the gap between the aging legacy drivers of the imageRUNNER series and the newer USB and network connectivity standards of the Advance series.

The System Configuration Dumper

A lesser-used but vital feature is the SYSCON dump. This function allows technicians to extract the NVRAM configuration. This is crucial for disaster recovery. If a Main Controller Board fails, a technician can replace the board and, using the data dumped via Tool 1050, restore the serial number, counter readings, and user