Skip to content
acs technologies logo
acs technologies icon
Client Portal

Conexant Cx31993 Driver Repack 🆕 Instant

The Conexant CX31993 is a highly regarded, budget-friendly USB-C DAC/Amp chip found in many popular "dongle" adapters. It is frequently cited as a "giant-killer" for its ability to outperform standard smartphone adapters and even some mid-range audio gear at a fraction of the price Key Technical Specifications Resolution: Supports high-resolution audio up to 32-bit / 384kHz Signal-to-Noise Ratio (SNR): Rated at approximately

, providing a very clean, "black" background with no audible hiss even on sensitive IEMs. Output Power: Typically delivers around 65mW at 32Ω

, which is sufficient for most In-Ear Monitors (IEMs) but may struggle with high-impedance "full-sized" headphones. Compatibility: Plug-and-play functionality on Windows, Android, macOS, iOS (iPhone 15+), and FreeBSD audioreviews.org Sound Profile & Performance Reviewers generally describe the CX31993 as having a neutral-to-bright sound signature. audioreviews.org Conexant (CX-Pro) CX31993 USB-C Amp/DAC Review

The Conexant is a widely used high-fidelity USB-C DAC/Amp chip found in affordable audio dongles. Most modern devices treat it as a plug-and-play device that does not require dedicated drivers. audioreviews.org Driver & Compatibility Details Operating Systems conexant cx31993 driver

: It is natively compatible with Windows (10 and later), Android, Linux, iOS (with adapters), and even FreeBSD. Plug-and-Play

: For most users on Windows 10/11, no manual driver installation is needed as the system uses standard USB audio class drivers. Legacy/Specific Drivers

: Some older or specific systems (like Windows 7 or Intel Classmate PCs) may require a manual driver, which can be found via repositories like DriverIdentifier Troubleshooting The Conexant CX31993 is a highly regarded, budget-friendly

: If not recognized on Windows, some users have "forced" installation using generic Realtek drivers, though this may limit audio quality to 24-bit/48kHz and disable microphone support. audioreviews.org Audio Performance Specs Conexant (CX-Pro) CX31993 USB-C Amp/DAC Review

Setting up ASIO for Music Production (DAWs like Ableton, FL Studio)

  1. After installing the driver, open your DAW's Audio Settings.
  2. Look for "ASIO Conexant CX31993" in the driver list.
  3. Set Buffer Size to 128 samples for low latency (increase to 512 if you hear pops).
  4. Note: The CX31993 is not an RME Babyface; keep expectations moderate. You will get 10-15ms latency, which is fine for casual recording but not for professional drum tracking.

macOS

Apple’s macOS has built-in USB Audio Class 2.0 support. The CX31993 dongle works out of the box on any Mac with a USB-C port (or via an adapter). No driver is required. The system will see it as a generic USB audio device.

What is the Conexant CX31993?

Before discussing drivers, let’s clarify the hardware. The CX31993 is a single-chip audio codec solution from Synaptics (which acquired Conexant). It is a USB audio controller designed specifically for USB-C headsets and dongles. After installing the driver, open your DAW's Audio Settings

It supports:

Unlike older DACs, it also integrates a headphone amplifier capable of driving up to 24-ohm loads easily (and can handle up to 300-ohm headphones with reduced volume).