Digi Edgeport 1 Driver Windows 10 64 Bit Best <1080p>

The Digi Edgeport/1 is highly regarded as a professional-grade USB-to-serial solution, known for its stability on Windows 10 64-bit compared to cheaper consumer alternatives. While it is now considered a legacy product, official driver support remains available. Performance Review & Compatibility

Reliability: Reviewers highlight that Edgeport drivers are robust enough for mission-critical industrial systems, offering better flow control and buffering than standard Prolific or FTDI-based chips.

Persistent COM Ports: A major advantage of these drivers is the ability to lock a specific COM port number to the device, even if you plug it into a different USB port on the same PC.

Windows 10 Support: Official drivers (v6.05 and newer) fully support Windows 10 64-bit. Users report successful operation even on systems that struggle with older serial adapters. Driver Installation Guide (v6.05)

To ensure a clean setup on Windows 10, follow the official Digi installation procedure:

Do not plug in the device yet. Connecting it before the driver is installed can lead to "unrecognized device" errors.

Download and Run: Get the v6.05 driver from the Digi Support Hub. Right-click the .exe and select Run as Administrator.

Connect Device: Once the installation window disappears, plug the Edgeport/1 into your USB port. It should now enumerate correctly.

Verify: Open the Edgeport Configuration Utility (found under Digi USB in the Start Menu) to confirm the COM port assignment. Critical Troubleshooting

Legacy vs. Modern: If your device is an older "Legacy" model, ensure you are using the specific legacy driver package if v6.05 fails to recognize it. digi edgeport 1 driver windows 10 64 bit

TUSB3410 Error: If Windows identifies the device as a "TUSB3410" instead of an Edgeport, it often indicates a driver conflict or a hardware fault where the EEPROM is not being read.

USB 3.0 Compatibility: While mostly stable, some older versions of the driver had issues with USB 3.0 (blue) ports; ensure you are on v6.05 or higher to resolve these host controller conflicts.

How to install the Edgeport driver in Windows - Digi International

Title: SOLVED: Digi Edgeport/1 Driver on Windows 10 64-bit (Official & Working Method)

Post:

I recently needed to get an old Digi Edgeport/1 (single-port USB to serial adapter) working on a fresh install of Windows 10 Pro 64-bit (version 22H2). Plug-and-play did NOT work automatically, and Windows Update couldn’t find a driver.

After some digging, I found the correct working driver. Here’s the fix:

The Problem:

  • Device Manager shows “Edgeport/1” with a yellow exclamation mark.
  • Windows tries to install an old, unsigned, or incomplete driver.
  • The legacy Edgeport Driver from 2015 fails to install on modern Win10 x64.

The Solution – Use Digi’s “RealPort” Driver (Works for Edgeport/1): The Digi Edgeport/1 is highly regarded as a

Digi has consolidated their drivers. Do not use the old “Edgeport Driver” – use the RealPort Com Port Redirector package. It includes the correct .INF and signed 64-bit driver for all Edgeport models (Edgeport/1, /4, /8, etc.).

Steps that worked for me:

  1. Download the official driver from Digi:

    • Go to: https://www.digi.com/support/productdetail?pid=4442 (Edgeport/1 product page)
    • Click the “Drivers + Software” tab.
    • Look for “RealPort Com Port Redirector for Windows” (NOT the legacy Edgeport driver).
    • Direct link as of this post: Look for version 4.10.0.0 or newer. (Filename usually something like RealPort_Windows_4.10.0.0.exe)

  2. Install the driver BEFORE plugging in the device (recommended):

    • Run the installer as Administrator.
    • Accept the defaults. It will install the core driver files.

  3. Reboot your PC (important for the driver signing to fully register).

  4. Plug in your Digi Edgeport/1.

    • Windows should now automatically detect it as “Digi Edgeport/1” and install the driver without errors.
    • Check Device Manager → “Ports (COM & LPT)” → You should see “Digi Edgeport/1 (COMx)”.

Troubleshooting if it still doesn’t work:

  • Disable Driver Signature Enforcement (temporary):
    Restart → Shift + Click “Restart” → Troubleshoot → Advanced Options → Startup Settings → Restart → Press 7 for “Disable driver signature enforcement”. Then reinstall the RealPort driver.

  • Manually update driver:
    If Device Manager still shows an error, right-click the device → Update driver → Browse my computer → Let me pick → Have Disk → Browse to C:\Program Files (x86)\Digi\RealPort\Drivers\ (or similar) and select the .INF file. Title: SOLVED: Digi Edgeport/1 Driver on Windows 10

  • Older Edgeport units (pre-2008):
    Some very old hardware (firmware v1.x) may need a firmware update. The RealPort installer includes a “Digi Firmware Update” tool – run that from the Start Menu.

Result: My Edgeport/1 is now working perfectly on Windows 10 64-bit, passing serial data at 115200 baud with no dropped packets.

Avoid these dead ends:

  • Don’t use the “Edgeport USB Serial Converter” driver from 2012 – it’s not signed for Win10 x64.
  • Don’t use random driver download sites – only use Digi’s official RealPort package.

Hope this saves someone the hours I lost! Reply if you need the exact version number or further help.

System: Windows 10 Pro 22H2 64-bit | Digi Edgeport/1 (P/N: 300-1000-01)

Step 1: Disable Automatic Driver Installation (Optional but Recommended)

  • Go to Control Panel > System > Advanced System Settings > Hardware > Device Installation Settings.
  • Select "No (your device might not work as expected)." This prevents Windows Update from overwriting your correct driver later.

The Correct Driver Version:

  • Version: 7.0.0.2 (or higher)
  • Release Date: 2020 or later
  • File Architecture: 64-bit (x64)
  • WHQL Certified: Yes (Windows Hardware Quality Labs certified)

As of 2025, Digi provides a unified driver package called "Digi Edgeport USB Serial Driver v7.0.0.2 for Windows 10 and 11 (64-bit)" . This driver works for all Edgeport models, including the Edgeport/1, Edgeport/4, Edgeport/8, and Edgeport/16.

Step 3: Installation Method A: Automatic Installer (Preferred)

If the driver you downloaded contains a setup executable (usually named setup.exe or install.exe), this is the easiest method.

  1. Navigate to the folder where you extracted the driver files in Step 1.
  2. Find and double-click the Setup.exe or Install.exe file.
  3. Follow the on-screen prompts in the Digi Installation Wizard.
    • Accept the license agreement.
    • Select "Install" or "Next".
  4. The wizard will detect the connected hardware and install the necessary files.
  5. Once finished, you may be prompted to restart your computer. Restart immediately to ensure the ports register correctly.

Step 6: Manual Driver Installation (If Automatic Fails)

If the automatic installer does not work:

  1. In Device Manager, right-click the unknown device (usually under "Other devices").
  2. Select Update driver > Browse my computer for drivers.
  3. Click Browse and navigate to the extracted driver folder (e.g., C:\Drivers\Edgeport\Windows10_x64).
  4. Check Include subfolders.
  5. Click Next. Windows will install the .inf file.
  6. Restart your PC.