The DIN EN 13155 standard is a critical European safety regulation specifically designed for non-fixed load lifting attachments. Often referred to as "below-the-hook" equipment, these are detachable tools used with cranes, hoists, and manually controlled manipulating devices to secure a load during transport.
Finding a DIN EN 13155 PDF is essential for engineers, safety officers, and manufacturers to ensure that lifting beams, magnets, and clamps meet the stringent mechanical and functional safety requirements mandated by the EU Machinery Directive. Scope of DIN EN 13155
The standard covers a wide range of specialized lifting accessories that are not permanently attached to the crane. These include:
A comprehensive guide for DIN EN 13155 (Cranes – Safety – Non-fixed load lifting attachments) should center on the core mechanical safety requirements, verification methods, and documentation necessary for compliance with European safety standards. 1. Scope and Applications
The standard covers detachable lifting equipment that can be fitted to a crane hook without affecting the crane's integrity.
Included Equipment: Plate clamps, vacuum lifters, lifting magnets (electric, permanent, electro-permanent), lifting beams, C-hooks, lifting forks, and lifting insert systems.
Key Exclusions: Slings, buckets, ladles, grab buckets, and attachments for lifting people. din en 13155 pdf
Related Standards: For high-risk applications or fatigue design over 16,000 cycles, refer to EN 13001-2. 2. Mechanical Safety Requirements
The primary goal is ensuring structural integrity under load. Static Strength (≤ 16,000 cycles):
Elastic Condition: Must withstand 2 × Working Load Limit (WLL) without permanent deformation.
Ultimate Condition: Must withstand 3 × WLL without dropping the load, even if permanent deformation occurs.
Fatigue Strength (> 16,000 cycles): Requires detailed fatigue proofing as per EN 13001 series.
Safety Factors for Inserts: Specific factors apply to concrete lifting systems, such as for steel failure and for concrete failure. 3. Verification Methods The DIN EN 13155 standard is a critical
Compliance must be verified through either calculation or physical testing. EN 13155-A1 User's Guide Overview | PDF - Scribd
In the world of material handling, safety isn't just a priority—it’s the foundation of every operation. If your business uses cranes or hoists with attachments like magnets, vacuum lifters, or lifting beams, you need to be intimately familiar with DIN EN 13155
This European standard ensures that "non-fixed" lifting attachments are designed and tested to prevent catastrophic failures. What is DIN EN 13155? Formally titled Cranes – Safety – Non-fixed load lifting attachments
, this standard applies to equipment that can be fitted to or removed from a crane hook by the operator. Unlike permanent crane components, these tools are often swapped out depending on the job.
The standard covers a wide range of common equipment, including: Plate Clamps: For gripping and lifting steel plates. Vacuum Lifters: Both self-priming and pump-operated. Lifting Magnets: Electric, permanent, and electro-permanent models. Lifting Beams & C-Hooks: Critical for balancing and handling large loads. Lifting Forks & Clamps: Common in warehouses and construction sites. Key Updates in the 2020 Edition
The standard was significantly updated (and further amended in 2025) to refine how these tools are verified for safety. The latest versions emphasize two distinct verification paths: Verification by Calculation and Test: Design Requirements : Outline the design criteria that
Combining engineering math with physical trials to ensure mechanical strength. Verification by Test Only:
A more rigorous physical testing regime requiring the equipment to withstand 2x its Working Load Limit (WLL) without permanent deformation. Why Compliance Matters Using equipment that adheres to DIN EN 13155
isn't just about ticking a legal box; it's about protecting your team. The standard requires manufacturers to provide: Clear Marking: Every attachment must display its WLL and own weight. Detailed Instruction Manuals:
Ensuring operators know how to use the tool without exceeding its limits. Inspection Guidelines:
Helping maintenance teams identify wear and tear before it leads to an accident. How to Get Started
If you are manufacturing or purchasing lifting accessories, ensure you are referencing the most recent version, such as the DIN EN 13155:2022 or the latest 2025 amendments for the highest safety compliance. specific audience , such as crane operators or procurement managers? SIST EN 13155:2021/oprA1:2023 - iTeh Standards
Absolutely not. Lifting attachments designed to EN 13155 are strictly for loads (materials). Lifting people requires a different standard (e.g., EN 1808 for suspended access equipment).
DIN EN 13155 (European Standard adopted as German DIN) specifies safety requirements and testing for non-fixed load lifting attachments — e.g., hooks, lifting beams, spreader bars, slings' fittings and other removable/portable lifting devices used with cranes, hoists and similar. Its aim is to reduce hazards during lifting operations with detachable/flexible attachments that are not part of the lifting machine.