Dvb Select Type Error Samsung Tv
The "DVB Select Type" error on a Samsung TV typically occurs when the television's internal software gets stuck during a channel scan or fails to recognize the digital broadcasting signal (DVB stands for Digital Video Broadcasting). This message often appears as a persistent overlay that prevents you from accessing other menus or watching TV. Immediate Fixes to Remove the Error
If the "DVB Select Type" notice is stuck on your screen, try these steps in order:
Perform a Soft Reset: While the TV is on, press and hold the Power button on your remote control until the TV turns off and the Samsung logo reappears on the screen.
Power Cycle the TV: Unplug the TV from the wall outlet for at least 30 to 60 seconds. This resets the internal circuitry and can clear minor glitches causing the DVB prompt.
Switch to the Correct Source: The DVB error often pops up when the TV is set to an incorrect input. Ensure your source is set to "TV" or "Live TV" rather than an unused HDMI port. Troubleshooting the Digital Broadcasting Setup dvb select type error samsung tv
If the error appears while you are trying to set up channels, the issue may be related to your signal or regional settings. How to get the DVB notice off the tv screen.
The "DVB Select Type" error on a Samsung TV typically occurs when you are trying to access the Broadcasting Auto Tuning
menus while the TV is set to the wrong input source or is running an active streaming application samsung.com Common Fixes Switch Source to "TV"
: The Broadcasting menu is often grayed out if the TV source is set to an external input like HDMI or a gaming console. Press the button on your remote and select to enable the tuning options. Close Background Apps The "DVB Select Type" error on a Samsung
: Active streaming apps (like Netflix, YouTube, or Disney+) can block access to the Broadcasting menu. Exit all apps or press and hold the Return/Back
button on your remote to ensure you are back at the home screen. Check Signal Type
: If you can access the menu but see a "DVB Select Type" prompt, it is asking you to choose your antenna type. Depending on your setup, select: Terrestrial/Air : If using a standard UHF antenna. : If connected directly to a wall outlet for cable service. Satellite/Freeview Sat : If using a satellite dish. Advanced Troubleshooting If the error persists or the menu remains locked: Reset Samsung TV to Factory Settings
Technical Field Guide: Resolving "DVB Select Type Error" on Samsung TVs
Subject: Samsung LED/LCD/QLED Televisions Symptom: Television displays "Mode Not Supported" or "DVB Select Type Error" when attempting to change channels or access the Guide. Root Cause: Conflict between the TV's internal tuner settings and the incoming signal type (Antenna vs. Cable) or corrupted channel mapping data. Still getting the error
Still getting the error?
If none of the above works:
- Update your TV's firmware: Support > Software Update
- Contact Samsung Support – the internal tuner might be faulty
- Use an external set-top box instead of the TV's built-in tuner
Let me know which type of connection you're using (antenna, cable, or satellite) for more specific steps.
Here’s a review-style breakdown of the “DVB Select Type Error” on Samsung TVs, written as if by a tech user or reviewer. This covers what the error is, why it happens, and how to fix it.
Notes on DVB variants and regional differences
- DVB-T2 is widely used for terrestrial HDTV in many countries; some Samsung TVs may require a firmware/region update to support DVB-T2.
- Cable networks may use DVB-C with QAM modulation and sometimes encryption — plain scanning may not reveal encrypted channels.
- Satellite (DVB-S/S2) requires correct LNB type and DiSEqC settings for multi-LNB setups.
2. Check the Antenna Cable
- Unplug the cable from the TV and plug it into an older portable TV. If that gets channels, your Samsung tuner might be faulty.
- Inspect the copper wire in the center of the cable. It should be straight and not touching the outer metal casing. If it is bent or broken, replace the cable.
7. Case studies / examples (concise)
- Example A: Region migrated from DVB‑T to DVB‑T2 with HEVC. Older Samsung TV set to DVB‑T failed during scan. Remedy: set DVB‑T2 mode or update firmware supporting HEVC.
- Example B: Satellite transponder sent non‑standard SDT descriptors; TVs from several vendors failed to list channels while a PC DVB‑S2 tuner that tolerated descriptors succeeded. Remedy: broadcaster fixed SDT; device firmware patched parser.