Dvbs-evb-kd1100hd-v1.1 Latest Software May 2026
Sing along to the traditional carol ‘Silent Night’ featuring a classic, simple piano accompaniment for your carol service or concert!
£9.95
Ministry use licence
Sing along to the traditional carol ‘Silent Night’ featuring a classic, simple piano accompaniment for your carol service or concert!
£9.95
Ministry use licence
The DVBS-EVB-KD1100HD-V1.1 refers to a specific motherboard or mainboard version commonly found in generic DVB-S2 (Satellite) High Definition set-top boxes. These receivers are often unbranded or sold under various local names across different regions.
Finding the "latest software" for these devices can be tricky because the hardware is generic. Here is a breakdown of what you need to know and how to proceed safely. 📡 Technical Overview Hardware Type: DVB-S2 Digital Satellite Receiver. Board Version: V1.1 (Revision).
Function: Decoding HD satellite signals, PVR (recording) via USB, and often basic internet apps (YouTube, Weather) if Wi-Fi is supported. 🛠️ How to Find the Correct Software
Updating with the wrong firmware can "brick" your device (make it unusable). Follow these steps to find a match:
Check the "System Info": Go to your receiver's Menu > Settings > System Information. Look for the Build Date and Hardware Version. Your update must match these exactly.
Identify the Chipset: The software is usually tied to the chipset (e.g., Montage, GX6605S, or Ali). Identifying the chip helps narrow down compatible firmware on Satellite Support Forums.
Manufacturer Sites: Since this is an EVB (Evaluation Board) design, look at sites like iVCAN or local distributor pages which often host generic firmware files. ⚠️ Critical Update Tips
Backup First: Always use the "Dump" or "Backup" feature in your USB menu to save your current working software before trying a new one. Match the File: Ensure the file ends in .bin.
Power Stability: Never turn off the power during the "Flashing" process. If it stops at 50%, wait—it can take several minutes.
Factory Reset: After a successful update, it is highly recommended to perform a Factory Reset (default password is usually 0000 or 8888) to prevent software glitches.
💡 Pro-Tip: If you are looking for this software to "unlock" scrambled channels (patching), search for terms like "KD1100HD-V1.1 patch software" on regional satellite forums. dvbs-evb-kd1100hd-v1.1 latest software
Do you have the current build date or chipset name from your system settings? I can help you narrow down the exact file version if you do. dvb-t2 software upgrade firmware update dvb-t24 new 2023
The DVBS-EVB-KD1100HD-V1.1 refers to a specific motherboard revision for a DVB-S2 (Satellite) High Definition set-top box. Because these devices are typically generic "white-label" OEM products, official software updates are rarely centralized and usually depend on the specific brand name under which the hardware was sold (e.g., Eurosat, StarGold, or other regional brands).
Below is a technical overview formatted as requested to assist with documenting this hardware. Technical Brief: DVBS-EVB-KD1100HD-V1.1 Platform 1. Hardware Overview The DVBS-EVB-KD1100HD-V1.1
is a Digital Video Broadcasting - Satellite (DVB-S) evaluation board (EVB) or production board.
Platform Architecture: Typically based on a low-cost SoC (System on Chip) such as NationalChip (GX series) or Montage.
Functionality: Designed for DVB-S2 signal demodulation, H.264/MPEG-4 video decoding, and HDMI/AV output.
Connectivity: Includes LNB input, USB 2.0 (for media and firmware updates), HDMI output, and RS-232 serial ports for recovery. 2. Software & Firmware Management
Finding the "latest" software requires matching the Firmware ID rather than just the board version, as different brands use the same board with incompatible software.
Firmware Verification: Before attempting an update, users must check the Information menu in the STB settings to record the Current Version, Build Date, and Tuner Type. Update Methods:
USB Upgrade: The most common method. The file (usually .bin or .abs) is placed on a FAT32-formatted drive. The DVBS-EVB-KD1100HD-V1
RS-232 Recovery: Used if the box is "bricked" (stuck on 'on' or 'load'). This requires a null-modem cable and a loader tool specific to the SoC (e.g., GXDownloader). 3. Common Issues and Maintenance
Signal Stability: Often tied to the specific tuner driver integrated into the software.
Media Support: Firmware updates often aim to improve YouTube API compatibility or add support for newer Wi-Fi dongle chipsets (e.g., MT7601 or RT5370).
Security: Generic firmware for these boards often lacks modern encryption; users are advised against using these for sensitive network tasks. 4. Conclusion
While the V1.1 board is a stable hardware revision, software longevity is limited by the manufacturer's support cycle. For specific "latest" files, users typically rely on community forums like SatDL or local distributor portals, as no single official global repository exists for this OEM board.
To help you find the exact software file, could you provide the Brand Name of your receiver or the Current Version info found in your device settings?
| Problem | Likely Cause | Solution |
| :--- | :--- | :--- |
| Receiver stuck on "Boot" or "Load" | Corrupted flash or wrong firmware version | Force recovery using the CH+ / CH- method. Re-download the firmware from a different source. |
| USB not recognized | USB not FAT32 or too large | Use a 4GB or 8GB USB 2.0 drive. Repartition it using Disk Management (Windows). |
| Channel list lost after update | This is normal (intended) | Re-scan satellites. Use a saved *.udf (user database) file only if it was exported from the same software version. |
| No audio on some channels | Outdated audio PID table | Install the latest software; then go to Audio Selection and manually select MPEG-4 or AAC. |
| PowerVU not decoding | Softcam keys are old | The latest software should have an auto-updater. If not, manually enter keys via Menu > Conditional Access > Key Editor. |
A: No. The DVBS-EVB-KD1100HD-V1.1 uses a proprietary RTOS. It is NOT an Enigma2-compatible receiver (those require Linux-based chipsets like Broadcom or Hisilicon).
Q: Is the software for KD1100HD V1.1 the same as for Amiko or Octagon? A: No. Amiko and Octagon use proprietary bootloaders. Only use software labeled for generic M3602 reference boards.
Q: Can I upgrade from V1.1 to V2.0 software? A: Absolutely not. That will brick your receiver. Stick to V1.1 builds only. Troubleshooting Common Update Issues | Problem | Likely
Q: My receiver died during update. Any recovery? A: Yes. You need a RS232 to TTL serial adapter and the Ali M3602 Earthsoft flashing utility. This is an advanced procedure.
Q: Does the latest software support HEVC/H.265? A: Only if your hardware is the KD1100HD-V2 (HEVC) variant. V1.1 typically does not decode H.265.
KD1100HD_V1.1_2024_03_15.absali3606_DVBS_KD1100HD_V1.1_softcam.absKD1100HD_V1.1_PVU_auto.absDo not flash random files to this device. Because this is a generic board used by many brands, using the wrong firmware can "brick" the device (render it unusable).
How to find the correct "Latest Software":
Menu > System Setup > System Information or Version. Look for the Main Software Version number.Typical Upgrade Procedure:
.abs or .bin file.upgrade.abs or dvbapp.bin).Menu > Tools > Upgrade by USB.Before downloading anything, check your current build. Turn on your device and navigate to:
Menu → System Information → Software Version
You will see something like:
M3602_KD1100HD_V1.1_20220512V1.1.02_2020V2.2_19_OCT_2021If your version is older than 2023, you are likely missing improvements.
Finding official updates for generic boards can be tricky because manufacturers rarely maintain public websites. Here are the most reliable sources (as of 2025-2026):