The EDMI Mk6N Genius is an advanced three-phase electronic revenue meter, an upgraded version of the original Mk6 Genius that debuted in 1998. Designed to meet updated IEC standards, it incorporates improved power supply and input protection technology. Key Product Features
High Accuracy: Generally offers Class 0.5S accuracy, suitable for high-precision revenue metering.
Customizable Functionality: Utilizes "EziScript," a powerful scripting language that allows users to create customized functions and complex register manipulations without requiring a firmware upgrade.
Large Data Storage: Includes a 2.1 MB Flash RAM for extensive load survey data and event logs.
Communication Options: Supports multiple protocols including Modbus, RS232, RS485, and various internal modems (GPRS/GSM).
Advanced Alarms: Features self-checks and tamper/wiring detection that can trigger SMS alerts, LED indicators, or emergency dial-outs. User Resources & Manuals
If you are looking for the technical manual or setup guides, they are primarily available through specialized repository sites or the manufacturer:
Full Hardware Reference Manual: Covers installation, maintenance, and technical characteristics for the Mk6 Series.
Mk6N Factsheet/User Manual: Provides specific technical specifications and wiring diagrams, available on platforms like Scribd.
Programming Software: The EziView Windows software is used for programming and reading the meter's parameters. Mk6N Advanced Three Phase Electronic Revenue Meter
Alarms (EFAs) A single user defined alarm condition. (via extensions) is available plus. pre-programmed alarms based. on numerous: Bình Phương Electric EDMI Mk6N Genius Meter Overview | PDF | Computing - Scribd
The EDMI Mk6N Genius is an advanced three-phase electronic revenue meter designed for high-accuracy energy measurement and utility management. It is an upgraded version of the original Mk6 Genius, incorporating updated power supply and input protection technology while maintaining the same firmware platform. Key Technical Specifications
The Mk6N is designed for versatility in various electrical configurations:
Measurement Modes: Supports 1-phase (3 circuits), 3-phase 3-wire, and 3-phase 4-wire systems.
Accuracy: Rated at Class 0.5S for high-precision revenue metering.
Voltage Range: Operates within 57V to 240V (phase to neutral) with a frequency range of 45Hz to 65Hz.
Environmental Limits: Designed for operating temperatures between -25°C and +60°C.
Data Storage: Features 2.1 MB Flash RAM for configuration, Time of Use (TOU) data, and load survey data. Display and Navigation
The meter features a user-friendly interface for manual data retrieval:
LCD Interface: A 16-character by 2-line alphanumeric display that can show up to 64 user-defined screens. Navigation Buttons:
Select Button (Bottom): Used to cycle through the display screens.
Billing Reset Button (Top): An optional, sealable button used to initiate a manual billing reset. Status Indicators:
PULSE 1 & 2: Two central LEDs that pulse to indicate energy consumption.
Phase/Battery/Comms Symbols: Indicators on the LCD show phase presence, battery health, and communication status. Advanced Functionality
The Mk6N is "AMI Ready" and offers extensive customization options for utilities: EDMI Mk6N Genius Meter Overview | PDF | Computing - Scribd
EDMI Mk6N Genius is an advanced three-phase electronic revenue meter that builds upon the original Mk6 Genius platform
. It features upgraded power supply technology and input protection to meet current IEC standards. Core Specifications & Features Accuracy Classes : Available in Class 0.5S, Class 1, and Class 2. Voltage Range : Supports nominal voltages from (phase to neutral). Data Storage : Includes over
of flash memory, capable of storing up to 400 days of channel data at 30-minute intervals.
: Features a 16-character by 2-line alphanumeric display for register information and system status. Power Backup
: Offers up to 2 years of backup time without mains power, utilizing either a lithium battery or an optional SuperCap. Academia.edu Functionality & Customization Scripting Language
: A built-in scripting language allows users to perform complex register manipulations and create customized functions without needing firmware upgrades. Measurement Capabilities
: Tracks fundamental voltage, current, watts, and harmonics up to the 50th order. Communication Ports
: Up to three independent ports, including an optical FLAG port (IEC 62056-21), RS-232, and RS-485. Bình Phương Electric Operational Software is typically managed using the software, which allows for: Programming and reading meter data. Offline configuration of tariff programs. Automated meter reading (AMR) applications. EDMI Genius/Mk6E User Manual - Internet Archive
EDMI Genius/Mk6E User Manual - Smart Building Services Pty Ltd : Free Download, Borrow, and Streaming : Internet Archive. Internet Archive EDMI Mk6N Genius Meter Overview | PDF | Computing - Scribd
Title: Navigating the EDMI MK6N "Genius": Technical Overview & Operational Insights
1. Introduction: The Workhorse of Advanced Metering The EDMI MK6N Genius is not a typical consumer appliance with a simple start/stop guide. Instead, it is a high-precision, multi-function revenue-grade electricity meter. While a dedicated "User Manual" (specifically EDMI part number 94-200-186 or similar variants) exists for installers, most end-users interact with it indirectly via their utility provider.
This document consolidates key findings from the MK6 series technical manuals, focusing on common queries regarding display readouts, communication protocols, and installation checks.
2. Key Manual Excerpts & Functional Details
-
Display Interface (The "Genius" LCD): Unlike standard meters, the MK6N features a programmable alphanumeric LCD. Per the manual, the display cycles through Register Codes (e.g., 01.8.0 for Import kWh, 02.8.0 for Export kWh). User note: If the screen is blank, it is likely in "anti-tamper mode" or requires a magnet swipe over the designated test point to activate the backlight.
-
Communication Ports: The technical manual details two primary interfaces:
- Optical Port (IEC 62056-21): Used for local data retrieval via a handheld unit (HHU). Baud rate default is 9600.
- PLC (Power Line Carrier): For AMI (Advanced Metering Infrastructure) communication.
-
Installation & Safety: The manual strictly warns: "Danger: Hazardous voltages exist. Disconnect supply before removing terminal cover." The meter requires a specific phase sequence (L1, L2, L3) for correct power factor measurement; reversing the sequence will log a "Phase Reversal" event.
3. Troubleshooting (From the Service Manual)
| Symptom | Likely Cause (per EDMI documentation) | Action | | :--- | :--- | :--- | | No LCD digits | Power loss (Check voltage L-N) or LCD contrast drift. | Verify supply voltage; perform manual reset via disconnect switch. | | Constant red LED flash | Normal operation (Kh pulse). 3200 imp/kWh = active load. | No action needed. | | Display shows "Err 1" | Real Time Clock (RTC) battery failure. | Requires factory repair. |
4. Availability of Full Manuals The complete "EDMI MK6N Genius User Manual" is not widely available to the public due to security protocols (Preventing utility meter tampering). However, technical specifications and wiring diagrams are accessible to registered partners via the EDMI Global Support Portal (login required).
5. Recommendations for Users
- End Consumer: You do not need the manual. Your utility controls the meter. Look for your utility's "How to read my smart meter" guide instead.
- Installer/Engineer: Download the official MK6 Series Installation Manual (Ref: MK6-UM-001) from the EDMI website or your distributor.
Disclaimer: This text is a summary of public technical data. Always refer to the official EDMI documentation for certified safety and programming procedures.
EDMI Mk6N Genius is an advanced three-phase electronic revenue meter designed for high-accuracy energy measurement and advanced power quality monitoring. It is an upgraded version of the original Mk6, updated to comply with current IEC standards and featuring improved power supply and input protection. Key Features and Specifications Measurement Modes
: Supports single-phase (3 circuits), 3-phase 3-wire, and 3-phase 4-wire systems. Accuracy Class
: Active Energy (kWh) Class 0.5S (IEC 62053-22) and Reactive Energy (kVARh) Class 2 (IEC 62053-23). Data Storage
: Large capacity for Load Survey data (standard 400 day-channel capacity at 30-minute intervals, expandable to over 2,500 day-channel capacity). Communications : Features multiple ports, including an Optical FLAG Port (IEC 62056-21),
. It is AMI-ready and supports Modbus, DNP3, and internal modems (GPRS/GSM). Power Quality Indication
: Capable of recording Sag/Swell events (5 cycle resolution) and performing harmonic analysis up to the 50th harmonic. Operating the Display The Mk6N features a 16-character by 2-line dot matrix LCD EDMI Mk6N Genius Meter Overview | PDF | Computing - Scribd
The EDMI Mk6N Genius acts as a high-precision, intelligent power meter utilizing scripting capabilities for advanced harmonics monitoring, tamper detection, and remote communication. It features Class 0.5S accuracy, 8-rate time-of-use billing, and detailed data logging, serving as a robust tool for grid management and audit trials. Detailed specifications and features can be reviewed in the Mk6N Smart Meter User Manual Scribd document. Mk6N - img.host.indiamart.com
Here’s a clean, professional, and helpful post you can use on a website, forum, social media, or support page.
Title: EDMI MK6N Genius User Manual – Official Guide & Setup Instructions
Post:
If you’re looking for the EDMI MK6N Genius user manual – whether for installation, programming, or daily operation – you’ve come to the right place.
The EDMI MK6N Genius is a sophisticated electricity meter commonly used for industrial, commercial, and advanced residential metering. Understanding its functions, display modes, and data output options is essential for accurate energy management.
Below is a structured guide based on the official user documentation. For a full PDF copy, please refer to your supplier or EDMI’s official support portal.
Mode 3: General Measurement
Used for QC inspection or surface plates. Disables all tool compensation and simply displays encoder position.
Common model variants & differences
- Variants differ by: communication module (RS-485 vs Ethernet vs cellular), accuracy class, display type, and firmware features (TOU, PQ metrics). Always verify the exact MK6N SKU code for precise specs.
1. Introduction to the EDMi MK6N Genius
Before diving into the button functions, it is essential to understand what the MK6N Genius is. Unlike standard digital readouts, the "Genius" line focuses on adaptive learning and context-sensitive help. The MK6N is a 6-axis DRO (though typically used for 3-axis with expansion) designed to interface with glass scales, magnetic scales, or encoders.
Key specifications at a glance:
- Display: High-brightness 7-inch TFT color screen.
- Input Voltage: 12-24V DC.
- Axis Capability: Up to 6 axes (X, Y, Z, plus 3 auxiliary).
- Data Output: USB-C, RS-232, and Wi-Fi (on Genius models).
- Resolution: Selectable from 0.1µm to 10µm.
The "Genius" in the name refers to the onboard wizard that guides you through complex milling operations, bolt hole patterns, and arc calculations without needing to consult a separate textbook.
Installation & wiring
- Electrical connections: Clear separate terminals for line voltages, neutral, and current transformers. CT wiring must follow polarity marking; neutral/earth wiring per installation manual.
- Earthing/grounding: Must follow local electrical code; correct earthing prevents measurement errors and safety hazards.
- Mounting: Panel or DIN rail as per model; ensure ventilation and ambient limits respected.
- Safety: Observe rated voltage/current, fuse/circuit protection on CT secondary, and isolation procedures before work.
