Epson Adjustment Program Reset L380-l383-l385-l485 Here

The Epson Adjustment Program (Resetter) is a utility used to clear the "Waste Ink Pad Counter" error, which occurs when the printer's internal pads are theoretically full. This guide applies to the L380, L383, L385, and L485 series. Preparation

Connect via USB: Ensure your printer is connected directly to your computer using a USB cable. This process often fails over Wi-Fi .

Disable Antivirus: Many antivirus programs flag the resetter as a "false positive." You may need to temporarily disable real-time protection to run the software .

Clear Print Queue: Ensure there are no pending documents in your printer's queue. Step-by-Step Reset Guide

Open the Utility: Run the AdjProg.exe file from your downloaded folder . Select Your Model: Click the Select button.

Choose your specific model (e.g., L380 or L485) from the "Model Name" dropdown .

Set the Port to Auto Selection or select the specific USB port where your printer is listed. Click OK. Enter Adjustment Mode: Click on Particular Adjustment Mode .

Find and select Waste ink pad counter from the list, then click OK . Check and Initialize:

Check the box for Main Pad Counter (and "Platen Pad Counter" if available for your model) . Click the Check button to see the current point count.

Keep the boxes checked and click Initialize. A pop-up will appear; click OK to confirm the reset . Finalize: EPSON Adjustment Program Reset L380-L383-L385-L485

A prompt will ask you to Turn off the printer. Turn it off manually using the power button, then click OK on the computer screen .

Turn the printer back on. The red blinking lights should now be gone. Important Maintenance Note

Resetting the software does not physically clean the ink pads. If you reset the counter multiple times without replacing or cleaning the physical pads, ink may eventually leak from the bottom of the printer. How to Reset Epson L485 - Resetter Epson L485

Introduction

EPSON printers, like any other printer, can encounter issues that require maintenance and troubleshooting. One common issue is the "Service Required" or "Error" message that appears on the printer's LCD screen. This message usually indicates that the printer's internal counter has reached its limit, and the printer needs to be reset. In this case, you'll need to use the EPSON Adjustment Program Reset to resolve the issue.

What is EPSON Adjustment Program Reset?

The EPSON Adjustment Program Reset, also known as the "EPSON Resetter" or "Adjustment Program," is a software tool designed to reset the internal counters of EPSON printers. This program helps to resolve issues related to the printer's waste ink pad counter, which can become full and cause errors.

Why do you need to reset your EPSON printer?

You may need to reset your EPSON printer in the following situations: The Epson Adjustment Program (Resetter) is a utility

Service Required or Error message appears on the LCD screen.
The printer stops printing and won't respond to any commands.
The waste ink pad counter is full, and you need to reset it.

EPSON Adjustment Program Reset for L380, L383, L385, and L485

The EPSON Adjustment Program Reset for L380, L383, L385, and L485 printers is a specific version of the software designed to work with these printer models. This program can help you reset the internal counters, resolve errors, and get your printer up and running again.

How to use the EPSON Adjustment Program Reset

To use the EPSON Adjustment Program Reset, follow these steps:

Download the software: Find a reliable source to download the EPSON Adjustment Program Reset for your printer model (L380, L383, L385, or L485).
Extract the files: Extract the downloaded files to a folder on your computer.
Connect the printer: Connect your printer to the computer using a USB cable.
Run the program: Run the EPSON Adjustment Program Reset software.
Select the printer: Select your printer model from the list of available printers.
Reset the counters: Follow the on-screen instructions to reset the internal counters.

Important notes

Use at your own risk: Resetting your printer using the EPSON Adjustment Program Reset may void your warranty.
Be cautious of fake software: Make sure to download the software from a reliable source to avoid malware or viruses.
Ink pad replacement: If you're resetting the waste ink pad counter, ensure you replace the ink pad or clean it properly to avoid further issues.

Conclusion

The EPSON Adjustment Program Reset for L380, L383, L385, and L485 printers is a useful tool to resolve common issues related to internal counters and waste ink pad counters. However, use the software with caution and at your own risk. If you're unsure or uncomfortable with the process, consider consulting an EPSON authorized service center or a professional printer repair technician.

The EPSON Adjustment Program (often called a "resetter") is a utility used to fix the "Service Required" error on printers like the L380, L383, L385, and L485. This error typically occurs when the waste ink pad counter reaches its limit. How to Use the Epson Adjustment Program

To reset the waste ink pad counter, follow these general steps: How to Reset Epson L380 with Resetter Service Required or Error message appears on the

The EPSON Adjustment Program Reset L380-L383-L385-L485 is a specialized tool designed for technicians and advanced users to reset and adjust the internal counters of EPSON printers, specifically the L380, L383, L385, and L485 models. These printers, part of EPSON's popular line of inkjet printers, are known for their reliability and high-quality printing. However, like any printer, they can encounter issues that require professional-level intervention, such as problems with ink pad counters or waste ink counters.

Option A: Replace the Pad (Best Practice)

Open the printer casing (look for tutorials for your specific model) and replace the felt absorption pad with a new one (sold on eBay/Amazon for $5-$10).

Step 8: Turn Off Service Mode

Close the Adjustment Program.
Turn off the printer using the power button.
Wait 10 seconds.
Turn on the printer normally.

Success: The error light should be gone. The printer will perform a massive cleaning cycle (this is normal—it resets the ink flow). Print a test page.

Part 2: Do You Really Need to Reset? (Diagnosis)

Before downloading software, confirm your printer needs a hardware reset.

Step 1: Check for the Error Message Try printing a nozzle check. If the printer refuses with the "Service Required" message, you need a reset.

Step 2: Assess Physical Ink Pads For L380/L383/L385/L485, the waste ink pad is inside the bottom of the printer. It is a thick felt pad.

If you have never opened the printer: Just do the software reset. The pad is likely fine.
If you have printed 20,000+ pages: You should physically replace or wash the pad. When you run the reset without cleaning, you risk actual ink overflow onto your desk.

Step 3: Try the Button Combination (Test mode) Turn off the printer. Hold the Stop (red circle) + Power button. While holding Power, release Stop. Press Stop 5 times, then release Power. If the printer doesn't enter diagnostic mode, the lock is severe—you must reset.

The Models Covered: L380, L383, L385, L485

While these four models share similar internal mechanics (based on the EcoTank printhead technology), there are slight variations:

L380 / L383 / L385: These are nearly identical 3-in-1 (Print, Scan, Copy) units without a fax or large LCD. The reset process is identical for all three.
L485: This model features a slightly more advanced control panel and Wi-Fi connectivity. The Adjustment Program works the same way, but ensure you select "L485" explicitly in the software.

Do not use a generic program. You need a version of the Adjustment Program that explicitly lists these four model numbers in the dropdown menu.