This is a gay porn website and contains explicit sexual material of really cute men having hardcore gay sex. Do not continue past this point if you are not of legal age in your location, or viewing sexual material is illegal in your country or if viewing gay sexual material may offend you.

I ACCEPT, ENTER NOW

I do not accept and want to leave

SECURE MEMBERS LOGIN

menu icon
Join now
site awards site awards
Become a member Join now
search icon

Firstchip Chipyc2019 Mptools Portable Patched -

Here is the critical information you need before searching:

Step 1: Identify the Drive

Plug in your problematic USB drive. Open ChipGenius (a portable tool every tech should have).

  • Look for the "Controller Vendor" and "Controller Part-Number."
  • Verify it says FirstChip and ChipYC2019. If it says something else (like SMI or Phison), you need a different tool.

Step 5: Low-Level Format (The "Erase All" Method)

  1. Click "Setting" (password is often empty, or 123456, or 320).
  2. Navigate to the "Format" or "Erase" tab.
  3. Select "Erase All Bad Blocks" or "Low Level Format".
  4. Under "Optimize", choose "Speed First" (for USB 3.0) or "Capacity First" (for older drives).
  5. Click "OK" to save.
  6. Back at the main screen, click "Start" (or the spacebar). The tool will reset the controller and begin rewriting firmware.

What Can You Actually Fix?

This tool is designed for low-level formatting and controller reinitialization. It solves: firstchip chipyc2019 mptools portable

  1. Fake Capacity (H2testw failures): Restores a 64GB fake drive to its true 8GB size.
  2. Write Protection Glitches: Removes software-locked write protection.
  3. Corrupted Firmware: Revives drives that show "0MB" capacity.
  4. Bad Block Management: Remaps failing NAND cells (temporarily).

1. Introduction

The FirstChip CHIPYC2019 is a USB 2.0/NAND flash controller often found in low-cost USB drives, SD cards, and embedded storage.
MPTOOLS (Mass Production Tools) is the firmware flashing and low-level formatting utility for these controllers.
The "Portable" version refers to a pre-configured, no-installation-required package that can run directly from a USB drive or folder.

The Quick Workflow

Here is the 60-second workflow for the 2019 Portable Tool: Here is the critical information you need before

  1. Run as Admin: Right-click FC_MP_tool_v2019.exe → Run as Administrator.
  2. Scan: Click the magnifying glass icon (Refresh/Scan). Your dead drive should appear in grey.
  3. Configure: Go to Setting → Password: 123456 (or 000000 or 320 – these are common defaults). Load the default ChipYC.INI profile.
  4. Low-Level Format: Under the "Test" tab, select Erase All (Full low-level format). Do not select "Factory Test" unless you want a brick.
  5. Execute: Click Start. Wait 10–30 minutes. When the square turns green, you’re done.
  6. Replug: Unplug and replug the USB. Format it in Windows Disk Management as exFAT or FAT32.

Step 2: Launch MPTools

Download and extract your FirstChip ChipYC2019 MPTools Portable. Run the executable (usually named FC_MPTool.exe or similar).

Step 1: Prepare Your System

On Windows 10/11, you must disable Driver Signature Enforcement. Reboot your PC and press F8 or shift-restart into "Advanced Startup" > "Disable Driver Signature Enforcement." Look for the "Controller Vendor" and "Controller Part-Number

Alternatives and Comparisons

| Tool | Best For | Portability | Difficulty | | :--- | :--- | :--- | :--- | | FirstChip MPTOOLS Portable | CBM2099, CBM2199, CHIPYC2019 | High (No install) | Medium | | ChipGenius | Identifying the controller (not repair) | High | Low | | HDD Low Level Format Tool | Generic HDDs/SSDs (not USB controllers) | Low | Low | | AlcorMP | Alcor controllers only | Medium | Medium | | SD Formatter | SD cards (not USB drives) | High | Low |

For the specific chipset CHIPYC2019, no alternative tool works. You must use FirstChip MPTOOLS.