Firstchip Fc1178 Fc1179 Mptools V1052 | Updated

Overview of Firstchip and MPTools

• Firstchip: This company produces chipsets used in various applications, including DVD players, digital TVs, and other consumer electronics. Their products often involve firmware and software tools for development and updates.

• FC1178 and FC1179: These are likely specific models of chipsets developed by Firstchip. Different chipsets are designed for different applications, with variations in their capabilities, such as processing power, supported interfaces, and multimedia handling. firstchip fc1178 fc1179 mptools v1052 updated

• MPTools: This seems to refer to a set of development or maintenance tools for the chipsets. "MP" could stand for anything from "Multimedia Processing" to something specific within the company, but it generally indicates tools for handling, configuring, or updating the chipsets. Overview of Firstchip and MPTools

• v10.52: This denotes a specific version of the MPTools software. Software versions are typically updated to fix bugs, add features, or support new hardware. Firstchip : This company produces chipsets used in

Step 5: Success or Failure Codes

• Green circle: Pass. Capacity restored. Unplug the drive, replug it, and format in Windows (NTFS/FAT32/exFAT).
• Red circle with [0x99]: Bad block error. Reduce ECC to 1 or run a low-level erase again.
• Red [0x28]: Firmware mismatch. You need to manually select a different FW file (look for FC1179_FW.bin in the tool folder).
• Red [0x101]: Wrong tool. Your drive is likely an FC1176 or an Alcor controller.

Key Features of MPTools v1052

When you download and run this version (typically a 1.5–2 MB executable, MPTool.exe), you will notice:

• UI Language: Usually Chinese or English selectable via Setting.ini.
• Controller Tab: Clearly shows "FC1178" or "FC1179" after a successful scan (using the magnifying glass icon).
• Parameter Setting (密码: 320 or 123456): The setup password is often 320 (for consumer mode) or 123456 (for developer mode).
• Key Settings:
  • Scan Mode: Choose between "Normal" (quick format), "Erase All" (full low-level erase), or "Original Bad" (retain existing bad block map).
  • Capacity Optimization: Allows manual setting of real capacity (e.g., 30000 MB for a 32 GB drive).
  • LED Duty Cycle: Often set to 1 for activity flash.
  • Preformat: Must be checked when recovering a totally bricked drive.

B. Settings

• Settings → Password = 320 (or 123456 for some versions)
• Main Setup:
  • Scan USB → check “Auto detect”
  • Controller – Select FC1178/FC1179 if listed, else leave auto
  • Flash – If auto fails, manually match flash ID (from ChipGenius)
  • Low Level Format – Check
  • Capacity – Keep default or set lower for stability

Part 6: Advanced Features in v1052 (For Technicians)

The "updated" label on v1052 signifies three advanced features missing in older builds:

1. PPM (Physical Parameter Measurement): In the debug menu (Ctrl+F6), you can adjust read/write voltages for stubborn TLC chips.
2. ROM Mode Shorting: If your drive is completely dead (no LED), the tool includes a pinout diagram (ShortDiagram.png) showing how to short the FC1178/79's ROM pins to force bootloader mode.
3. Cross-flashing: You can flash FC1178 firmware onto an FC1179 (and vice versa) at your own risk. This unlocks different features but often breaks USB 3.0 negotiation.