The default login credentials for the Fujitsu Integrated Remote Management Controller (iRMC) are as follows: How to Reset the Password

If the default credentials do not work, you can reset the iRMC admin password without rebooting the server by using IPMI tools Linux/ESXi: utility. Ensure the IPMI drivers ( ipmi_msghandler ipmi_devintf

) are loaded in the kernel before running commands to set a new password. Fujitsu IPMIVIEW

tool. You can execute commands through the Command Prompt to restore access to the Key iRMC Information Default Port: The controller typically uses port for operations. Capabilities: The iRMC (such as the

) allows for agentless out-of-band monitoring, video capturing for troubleshooting, and virtual media redirection. Red Hat Documentation specific IPMI command syntax for your operating system to perform the reset?

How to reset iRMC admin password on Fujitsu PRIMERGY servers

The default credentials for a Fujitsu Integrated Remote Management Controller (iRMC) depend on the hardware generation of your server. Historically, Fujitsu used a universal default, but newer models (starting with ) use unique, per-device passwords for improved security Fujitsu Global Default Credentials by iRMC Generation Note: Both fields are case-sensitive. (e.g., PRIMERGY M7 series) Unique per server . You can find this password printed on the physical System ID card

(pull-out tab) located on the front of the server or on a label attached to the top cover. The password often follows the format Admin-XXXXXXX

and the entire string (including the prefix) must be entered. Fujitsu Global How to Find or Reset the Password Check the System ID Card:

systems, pull out the small plastic tab on the front panel. The password is listed below the barcode Use IPMITool (Local Reset):

If you have local OS access, you can reset the password without knowing the current one by using the following command in a terminal: ipmitool user set password 2 'NewPassword123!' Physical Jumper:

Older PRIMERGY motherboards often have a "password clear" or "reset" jumper near the SATA ports that can clear BIOS and management passwords. Refer to your specific model's Maintenance Manual for the exact location. Fujitsu Global IPMITool command for a different operating system, such as VMware ESXi AI responses may include mistakes. Learn more

The default password for a Fujitsu Integrated Remote Management Controller (iRMC) varies by hardware generation, with newer models shifting from generic credentials to unique, server-specific passwords for enhanced security. Quick Reference: Default Credentials iRMC Generation Default Username Default Password iRMC S2, S3, S4, S5 admin admin iRMC S6 admin Unique per server (found on System ID card) Understanding iRMC S6 Security Changes

Starting with the iRMC S6 generation, Fujitsu implemented a "secure by default" policy. Instead of the traditional admin/admin combination, each server is assigned a unique password at the factory.

Location: The unique password is printed on the physical System ID card attached to your server chassis.

Font Ambiguity: Be aware that certain characters (like capital 'I' and lowercase 'l') may look similar. Fujitsu recommends using a barcode scanner or smartphone to scan the label on the System ID card to avoid typing errors.

Factory Resets: If you perform a factory reset via the UEFI BIOS, the credentials will revert to this unique printed password, not a generic one. Password Requirements for iRMC S6

If you choose to change the password on an S6 system, it must meet strict complexity requirements: Length: Minimum of 12 characters. Complexity: Must meet at least 3 of the following: At least one lowercase letter (a-z). At least one uppercase letter (A-Z). At least one digit (0-9). At least one special character. How to Reset a Lost iRMC Password

If you have lost access to the iRMC and the default credentials do not work, you can reset the password through several methods: 1. Using IPMItool (No Reboot Required)

If you have access to the host operating system (Linux or Windows) and the IPMI drivers are loaded, you can reset the password without taking the server offline. Linux Command: ipmitool user set password 2 'YourNewPassword' Use code with caution. Note: User ID 2 is almost always the default admin account.

Windows: Use the Fujitsu IPMIView tool to execute similar commands. 2. Using UEFI BIOS (Reboot Required) Reboot the server and enter the BIOS Setup Utility. Navigate to the Server Management or iRMC section. Look for an option titled "Load iRMC Default Values".

Setting this to "Yes" and saving will revert the iRMC to its factory state (Warning: This wipes all custom iRMC configurations). 3. Physical Jumper (Emergency Access)

On some motherboards (such as the TX1330 series), there is a physical password clear jumper. Consult the Fujitsu Upgrade and Maintenance Manual for your specific model to locate the pins (usually found near the SATA ports).

The default password for Fujitsu iRMC (integrated Remote Management Controller) depends on the generation of the server you are using. Traditional Default Credentials

For older generations (iRMC S2, S3, S4, and early S5), the standard factory default credentials are: New Password Policy (iRMC S6 and Modern Servers) Starting with

(and some late S5 models like the PRIMERGY M5 series), Fujitsu implemented a unique password policy to enhance security. Fujitsu Global Individual Passwords

: Each server now has a unique, case-sensitive default password generated specifically for that unit. Where to find it System ID Card

: Look for a pull-out tab or card (System ID Card) on the front or rear of the server. The password is the complete line of text printed below the barcode. Top Cover Label

: If there is no ID card, the unique password may be on a label attached to the top cover of the server. : These unique passwords often follow a pattern like Admin-XXXXXXXXXXXX Admin-4CkNxNZqWoOK

). Note that the "Admin-" prefix is part of the password itself. Fujitsu Global Useful Troubleshooting Links Fsas Technologies iRMC S6 FAQ

: Official guide on identifying unique default passwords and common character confusion (e.g., lowercase "l" vs. uppercase "I"). How to reset iRMC admin password

: A guide for using IPMI tools to reset the password from within the operating system if you are locked out. iRMC S6 Configuration and Maintenance Manual

Troubleshooting Fujitsu iRMC Default Passwords If you are trying to log into a Fujitsu Integrated Remote Management Controller (iRMC) for the first time or after a factory reset, the default credentials you need depend heavily on the generation of your PRIMERGY server. Default Credentials by Version iRMC S2 to S5 (Older Models): Username: admin Password: admin (Case-sensitive) iRMC S6 (Current Models): Username: admin

Password: Unique for each server. It is based on the Serial Number of the system.

Where to find it: Check the System ID Card (pull-out tag) attached to the server chassis. It contains a printed default password and a barcode that you can scan with a smartphone to avoid typing errors. Login Troubleshooting

If the standard admin/admin or the serial-based password doesn't work:

Case Sensitivity: Both the username and password are case-sensitive. Ensure admin is entered in all lowercase.

New Password Requirements: For iRMC S6, any new password you set must be at least 12 characters long and include at least three of the following: lowercase, uppercase, digits, or special characters.

Individualized Security: Starting with iRMC S6, Fujitsu implemented a "Force to change default password" policy, meaning you must update the credential immediately upon your first successful login. How to Reset if Locked Out

If you've forgotten a custom password, you can reset it using local access to the server operating system via the ipmitool utility:

For Linux/ESXi: Open a terminal and run:ipmitool user set password 2 (User ID '2' is typically the default admin account).

For Windows: Use the Fujitsu IPMIVIEW tool or the ServerView Suite.

Physical Reset: Some motherboards have a "Password Clear" jumper near the SATA ports that can be used to reset BIOS and management passwords.

Need help finding your serial number or ID card? You can usually locate it on a pull-out tab at the front or rear of your Fujitsu PRIMERGY server.

1. Isolate the Management Network

Part 6: Recovery Options When the Default Password Doesn’t Work

You bought a used server from eBay, or the previous IT admin left without documenting the iRMC password. Now admin / admin fails. Here is how to regain access without replacing the motherboard.

Conclusion: Default is for Setup, Not for Life

The Fujitsu iRMC default password—admin / admin—is a lifeline for initial configuration and recovery. But leaving it unchanged is an invitation to compromise. Every day that default credential remains active on a network-accessible server, you are betting your security posture on the hope that no attacker scans for it.

Your action plan:

  1. Immediately change the password on every Fujitsu iRMC in your environment.
  2. Move the management interface to a secure, firewalled VLAN.
  3. Document the new passwords in a corporate password manager (not a sticky note).
  4. Schedule a monthly audit of iRMC user accounts and access logs.

The convenience of admin/admin ends the moment the server leaves the box. Take control of your out-of-band management before someone else does.

For official documentation, visit the Fujitsu Support Portal (support.ts.fujitsu.com). This article is for educational purposes. Always follow your organization’s security policies.

Here’s a quick guide to the default credentials for Fujitsu iRMC (Integrated Remote Management Controller), commonly found on Fujitsu PRIMERGY servers.

4. Implement IP Access Control Lists (ACL)

The "User" vs. "Admin" Distinction

Some iRMC firmware versions create a second default user:

| Role | Username | Default Password | Access Level | | :--- | :--- | :--- | :--- | | Administrator | admin | admin | Full control (reboot, reconfigure, remote console) | | Operator | user | user | Limited monitoring, no configuration changes |

Do not rely on the user account if you need full control.

Keyboard Layout Issues

If you are typing the unique password from the sticker manually, ensure your keyboard is set to the correct language layout (e.g., US vs. UK). It is often safer to copy and paste the password if viewing a digital manifest.

4.2. Changing via Command Line (SSH)

If the web interface is unavailable, the password can be changed via SSH:

ssh admin@<iRMC_IP_Address>
# Once logged in:
configure user admin password <new_password>

Read more

Fujitsu Irmc Default Password Site

The default login credentials for the Fujitsu Integrated Remote Management Controller (iRMC) are as follows: How to Reset the Password

If the default credentials do not work, you can reset the iRMC admin password without rebooting the server by using IPMI tools Linux/ESXi: utility. Ensure the IPMI drivers ( ipmi_msghandler ipmi_devintf

) are loaded in the kernel before running commands to set a new password. Fujitsu IPMIVIEW

tool. You can execute commands through the Command Prompt to restore access to the Key iRMC Information Default Port: The controller typically uses port for operations. Capabilities: The iRMC (such as the

) allows for agentless out-of-band monitoring, video capturing for troubleshooting, and virtual media redirection. Red Hat Documentation specific IPMI command syntax for your operating system to perform the reset?

How to reset iRMC admin password on Fujitsu PRIMERGY servers

The default credentials for a Fujitsu Integrated Remote Management Controller (iRMC) depend on the hardware generation of your server. Historically, Fujitsu used a universal default, but newer models (starting with ) use unique, per-device passwords for improved security Fujitsu Global Default Credentials by iRMC Generation Note: Both fields are case-sensitive. (e.g., PRIMERGY M7 series) Unique per server . You can find this password printed on the physical System ID card

(pull-out tab) located on the front of the server or on a label attached to the top cover. The password often follows the format Admin-XXXXXXX

and the entire string (including the prefix) must be entered. Fujitsu Global How to Find or Reset the Password Check the System ID Card:

systems, pull out the small plastic tab on the front panel. The password is listed below the barcode Use IPMITool (Local Reset):

If you have local OS access, you can reset the password without knowing the current one by using the following command in a terminal: ipmitool user set password 2 'NewPassword123!' Physical Jumper:

Older PRIMERGY motherboards often have a "password clear" or "reset" jumper near the SATA ports that can clear BIOS and management passwords. Refer to your specific model's Maintenance Manual for the exact location. Fujitsu Global IPMITool command for a different operating system, such as VMware ESXi AI responses may include mistakes. Learn more

The default password for a Fujitsu Integrated Remote Management Controller (iRMC) varies by hardware generation, with newer models shifting from generic credentials to unique, server-specific passwords for enhanced security. Quick Reference: Default Credentials iRMC Generation Default Username Default Password iRMC S2, S3, S4, S5 admin admin iRMC S6 admin Unique per server (found on System ID card) Understanding iRMC S6 Security Changes

Starting with the iRMC S6 generation, Fujitsu implemented a "secure by default" policy. Instead of the traditional admin/admin combination, each server is assigned a unique password at the factory. fujitsu irmc default password

Location: The unique password is printed on the physical System ID card attached to your server chassis.

Font Ambiguity: Be aware that certain characters (like capital 'I' and lowercase 'l') may look similar. Fujitsu recommends using a barcode scanner or smartphone to scan the label on the System ID card to avoid typing errors.

Factory Resets: If you perform a factory reset via the UEFI BIOS, the credentials will revert to this unique printed password, not a generic one. Password Requirements for iRMC S6

If you choose to change the password on an S6 system, it must meet strict complexity requirements: Length: Minimum of 12 characters. Complexity: Must meet at least 3 of the following: At least one lowercase letter (a-z). At least one uppercase letter (A-Z). At least one digit (0-9). At least one special character. How to Reset a Lost iRMC Password

If you have lost access to the iRMC and the default credentials do not work, you can reset the password through several methods: 1. Using IPMItool (No Reboot Required)

If you have access to the host operating system (Linux or Windows) and the IPMI drivers are loaded, you can reset the password without taking the server offline. Linux Command: ipmitool user set password 2 'YourNewPassword' Use code with caution. Note: User ID 2 is almost always the default admin account.

Windows: Use the Fujitsu IPMIView tool to execute similar commands. 2. Using UEFI BIOS (Reboot Required) Reboot the server and enter the BIOS Setup Utility. Navigate to the Server Management or iRMC section. Look for an option titled "Load iRMC Default Values".

Setting this to "Yes" and saving will revert the iRMC to its factory state (Warning: This wipes all custom iRMC configurations). 3. Physical Jumper (Emergency Access)

On some motherboards (such as the TX1330 series), there is a physical password clear jumper. Consult the Fujitsu Upgrade and Maintenance Manual for your specific model to locate the pins (usually found near the SATA ports).

The default password for Fujitsu iRMC (integrated Remote Management Controller) depends on the generation of the server you are using. Traditional Default Credentials

For older generations (iRMC S2, S3, S4, and early S5), the standard factory default credentials are: New Password Policy (iRMC S6 and Modern Servers) Starting with

(and some late S5 models like the PRIMERGY M5 series), Fujitsu implemented a unique password policy to enhance security. Fujitsu Global Individual Passwords

: Each server now has a unique, case-sensitive default password generated specifically for that unit. Where to find it System ID Card The default login credentials for the Fujitsu Integrated

: Look for a pull-out tab or card (System ID Card) on the front or rear of the server. The password is the complete line of text printed below the barcode. Top Cover Label

: If there is no ID card, the unique password may be on a label attached to the top cover of the server. : These unique passwords often follow a pattern like Admin-XXXXXXXXXXXX Admin-4CkNxNZqWoOK

). Note that the "Admin-" prefix is part of the password itself. Fujitsu Global Useful Troubleshooting Links Fsas Technologies iRMC S6 FAQ

: Official guide on identifying unique default passwords and common character confusion (e.g., lowercase "l" vs. uppercase "I"). How to reset iRMC admin password

: A guide for using IPMI tools to reset the password from within the operating system if you are locked out. iRMC S6 Configuration and Maintenance Manual

Troubleshooting Fujitsu iRMC Default Passwords If you are trying to log into a Fujitsu Integrated Remote Management Controller (iRMC) for the first time or after a factory reset, the default credentials you need depend heavily on the generation of your PRIMERGY server. Default Credentials by Version iRMC S2 to S5 (Older Models): Username: admin Password: admin (Case-sensitive) iRMC S6 (Current Models): Username: admin

Password: Unique for each server. It is based on the Serial Number of the system.

Where to find it: Check the System ID Card (pull-out tag) attached to the server chassis. It contains a printed default password and a barcode that you can scan with a smartphone to avoid typing errors. Login Troubleshooting

If the standard admin/admin or the serial-based password doesn't work:

Case Sensitivity: Both the username and password are case-sensitive. Ensure admin is entered in all lowercase.

New Password Requirements: For iRMC S6, any new password you set must be at least 12 characters long and include at least three of the following: lowercase, uppercase, digits, or special characters.

Individualized Security: Starting with iRMC S6, Fujitsu implemented a "Force to change default password" policy, meaning you must update the credential immediately upon your first successful login. How to Reset if Locked Out

If you've forgotten a custom password, you can reset it using local access to the server operating system via the ipmitool utility: Never place the iRMC on the same VLAN

For Linux/ESXi: Open a terminal and run:ipmitool user set password 2 (User ID '2' is typically the default admin account).

For Windows: Use the Fujitsu IPMIVIEW tool or the ServerView Suite.

Physical Reset: Some motherboards have a "Password Clear" jumper near the SATA ports that can be used to reset BIOS and management passwords.

Need help finding your serial number or ID card? You can usually locate it on a pull-out tab at the front or rear of your Fujitsu PRIMERGY server.

1. Isolate the Management Network

  • Never place the iRMC on the same VLAN as production traffic or end-user workstations.
  • Create a dedicated out-of-band management VLAN with strict ACLs.

Part 6: Recovery Options When the Default Password Doesn’t Work

You bought a used server from eBay, or the previous IT admin left without documenting the iRMC password. Now admin / admin fails. Here is how to regain access without replacing the motherboard.

Conclusion: Default is for Setup, Not for Life

The Fujitsu iRMC default password—admin / admin—is a lifeline for initial configuration and recovery. But leaving it unchanged is an invitation to compromise. Every day that default credential remains active on a network-accessible server, you are betting your security posture on the hope that no attacker scans for it.

Your action plan:

  1. Immediately change the password on every Fujitsu iRMC in your environment.
  2. Move the management interface to a secure, firewalled VLAN.
  3. Document the new passwords in a corporate password manager (not a sticky note).
  4. Schedule a monthly audit of iRMC user accounts and access logs.

The convenience of admin/admin ends the moment the server leaves the box. Take control of your out-of-band management before someone else does.

For official documentation, visit the Fujitsu Support Portal (support.ts.fujitsu.com). This article is for educational purposes. Always follow your organization’s security policies.

Here’s a quick guide to the default credentials for Fujitsu iRMC (Integrated Remote Management Controller), commonly found on Fujitsu PRIMERGY servers.

4. Implement IP Access Control Lists (ACL)

  • iRMC → Security → IP Access Control.
  • Whitelist only your management jump host or admin subnet. Block everything else.

The "User" vs. "Admin" Distinction

Some iRMC firmware versions create a second default user:

| Role | Username | Default Password | Access Level | | :--- | :--- | :--- | :--- | | Administrator | admin | admin | Full control (reboot, reconfigure, remote console) | | Operator | user | user | Limited monitoring, no configuration changes |

Do not rely on the user account if you need full control.

Keyboard Layout Issues

If you are typing the unique password from the sticker manually, ensure your keyboard is set to the correct language layout (e.g., US vs. UK). It is often safer to copy and paste the password if viewing a digital manifest.

4.2. Changing via Command Line (SSH)

If the web interface is unavailable, the password can be changed via SSH:

ssh admin@<iRMC_IP_Address>
# Once logged in:
configure user admin password <new_password>