Gt005 Gps Tracker User Manual

The Ultimate GT005 GPS Tracker User Manual: Setup, Features, and Troubleshooting

If you’ve just purchased a GT005 GPS Tracker, you are likely holding a compact, powerful device designed for vehicle security, asset tracking, or keeping loved ones safe. However, like many tech gadgets, these mini-trackers often come with a "Quick Start" guide that is anything but quick.

If you’ve lost your physical copy or just need a clearer explanation, you’ve come to the right place. This guide serves as your complete GT005 GPS Tracker User Manual, covering everything from SIM card installation to command configuration. Gt005 Gps Tracker User Manual


Common GT005 Problems & Solutions (Troubleshooting)

Based on the manual’s sparse “FAQ” section, here are real fixes: The Ultimate GT005 GPS Tracker User Manual: Setup,

| Problem | Likely Cause | Fix | | :--- | :--- | :--- | | “SMS command not working” | Wrong password or spaces | Send reset#123456# to factory reset | | No GPS location (only GSM) | Vehicle is indoors or metallic tint | Move tracker near windshield or under plastic bumper | | Tracker goes offline randomly | Poor power ground | Sand the ground metal contact point | | Receiving old location data | GPRS buffer not cleared | Send fix# command to force a fresh GPS lock | Common GT005 Problems & Solutions (Troubleshooting) Based on

4. SIM Card Installation (Critical)

  1. Obtain a compatible SIM card (2G/3G/4G depending on your region – 2G fallback recommended).
  2. Disable the SIM PIN (use a phone to remove PIN lock).
  3. Enable GPRS (contact your carrier to ensure data plan is active).
  4. Insert the SIM into the GT005 slot with the gold contacts facing down.
  5. Power on the device.

LED indicators will flash: Blue blinking → searching network. Blue solid → network OK.


3. Product Overview

| Part | Description | |------|-------------| | LED 1 (Green) | GPS signal status | | LED 2 (Blue) | GSM network status | | LED 3 (Red) | Power / Battery status | | Micro USB port | Charging (battery models) or configuration | | SIM slot | Insert activated SIM card | | Reset button | Restore factory settings (press 5 sec) |


9. SOS Alarm

Step 1: Inserting the SIM Card (Most Critical Step)

The manual stresses this: The SIM card must have SMS capability, 2G GSM service, and GPRS data enabled. Disable the PIN code on the SIM before inserting.

  1. Unscrew the back cover of the GT005.
  2. Insert the SIM card in the designated holder.
  3. Reassemble the device.
  4. Do not power it up yet – first, send a configuration SMS.

10. Safety & Legal

Step 3: Power On