The "BP 10140" designation refers to the headquarters address of Hager Controls S.A.S.
in Saverne, France, which is often printed on various device housings. The actual product most commonly associated with this marking in user queries is the Hager EG103 , a single-channel digital time switch. Below is an informative guide for the Hager EG103 Digital Time Switch , assuming this is the device you have. Manual for the Hager EG103 Digital Time Switch
The Hager EG103 is a 24-hour/7-day programmable digital timer used to automate electrical loads like lighting or pumps. 1. Basic Setup and Display Automatic Mode
: By default, the timer should be in "Auto" mode to follow its programmed schedule.
: Features a digital display with a menu button, plus/minus buttons for navigation, and an "OK" button for confirmation.
: Ensure the current date and time are set; if power is lost, digital models typically retain their programming, but some may lose the current time depending on the battery state. 2. Programming Steps To set a new on/off schedule: Enter Program Mode : Press the button until flashes on the screen. Select Days
. Days of the week will flash (1 = Monday, 7 = Sunday). Use the plus/minus buttons to select individual days or groups (e.g., all 7 days) and confirm each with Set 'On' Time flashes, press
. Set the hour and minutes using the plus/minus buttons, confirming each with Set 'Off' Time
flashes, repeat the process to set the time you want the load to turn off. Save & Exit
to return to the main display. The device must be in "Auto" mode for the program to run. 3. Manual Override
If you need to manually turn the device on or off outside its schedule, most Hager models have a button or toggle that allows you to cycle through Permanent On Permanent Off 4. Safety & Installation
hager timer connection and setting full information #zkmultitech 26-Nov-2024 —
The Hager BP 10140 Go to product viewer dialog for this item.
is the technical manufacturer address reference (B.P. 10140, 67703 Saverne Cedex, France) typically printed on the labels or manuals of various Hager products, most notably the Go to product viewer dialog for this item. digital time switch.
If you are looking for the manual for this specific device, you can find the EG103 Operating Instructions on the Hager Bocchiotti site. Programming Your Digital Time Switch
To set up a basic on/off schedule using the device's front buttons:
Enter Program Mode: Press the menu button until the program icon flashes.
Select Days: Choose the specific day or group of days (e.g., 1 for Monday, 7 for Sunday) using the + or - buttons and confirm each with ok.
Set "ON" Time: When "ON" flashes, press ok. Use the + and - keys to set the hour and minutes, confirming each step with ok.
Set "OFF" Time: When "OFF" flashes, repeat the process to set the time you want the device to switch off.
Exit: Press menu to exit the setup and return to the main display. Quick Tips for Hager Timers
hager timer connection and setting full information #zkmultitech
The Hager Controls BP 10140 is not a standalone product model but rather the postal box (Boîte Postale) address for Hager's headquarters in Saverne, France. When this address appears on a device, it usually indicates the unit is part of Hager’s KNX building automation or time switch ranges, such as the TXA or TYA series. General Operating Guide for Hager Devices
Since "BP 10140" is printed on various modules, identifying your specific device type (analog timer, digital timer, or KNX actuator) is the first step. 1. Analog Time Switches (e.g., EH011, EHN011)
If your device has a large circular dial with small plastic pins (segments):
Set the Current Time: Rotate the outer dial clockwise until the current time aligns with the fixed arrowhead pointer on the inner dial.
Program ON/OFF Times: Each segment typically represents 15 minutes.
Push segments inward (or toward the center) for the periods you want the power ON. Leave segments outward for when you want the power OFF.
Manual Override Switch: Look for a small 3-position switch usually located at the bottom right: Clock Icon: Automatic mode (follows your programmed pins). 1 (or "I"): Permanently ON (Manual Override). 0: Permanently OFF. 2. Digital Time Switches (e.g., EG103, EGN103)
If your device has an LCD screen and buttons (Menu, OK, +, -): Access Programming: Press Menu, select Prog, and press OK. Set Schedule: hager controls bp 10140 manual portable
Select the day or group of days (e.g., 1–7 for the whole week) using + or -.
Choose the state (ON or OFF) and set the specific hour and minute.
Bluetooth Configuration: Newer "EGN" models can be programmed via the Hager Mood app. 3. KNX Actuators (Building Automation)
- manual activation of the outputs on the device possible, building site operation - Status display of the outputs on the device - Ed 10140 - device.report
Absolutely, for specific niches. While not a cutting-edge smart relay, its simplicity, ruggedness, and wide voltage range make it a favorite among field service engineers. The hager controls bp 10140 manual portable concept is not a myth—it’s a practical toolkit that combines a legacy workhorse with modern field-testing needs.
Remember: The manual is non-negotiable. Keep a printed copy inside your portable enclosure, plus a PDF on your phone. Treat the BP 10140 with respect – it may not look like much, but miswire it, and it will let the magic smoke out.
By understanding its pinout, creating a portable rig, and respecting safety, you will unlock a highly flexible timing solution that fits in a lunchbox.
Need further help? Leave a comment below or reach out to industrial control communities. If you have the original manual in good condition, consider scanning it and uploading to a public archive – you might save the next technician hours of frustration.
The Hager BP 10140 is a reliable and straightforward portable timer designed to help you manage electrical devices with ease. Whether you are looking to automate your home lighting or manage small appliances, this guide provides a comprehensive overview of how to set up and operate your Hager BP 10140. Overview of the Hager BP 10140
The Hager BP 10140 is a mechanical plug-in timer. Its "portable" designation means it can be moved from one wall outlet to another, making it a versatile tool for temporary setups like holiday decorations, fans, or lamps. Key Features 24-hour programmable cycle. Manual override switch (ON/OFF/AUTO). 15-minute switching intervals. Compact, durable plastic housing. Standard three-pin plug compatibility. Step-by-Step Setup Guide
Getting your timer ready involves three main phases: setting the current time, programming your schedule, and activating the device. 1. Set the Current Time
Locate the large circular dial on the face of the unit. Turn the dial clockwise until the arrow (usually indicated by a small triangle or pointer) aligns with the current time of day. Note that most Hager timers use a 24-hour clock, so 2:00 PM will be represented as 14:00. 2. Program the Switching Times
Around the edge of the dial, you will see small black "pins" or "segments." Each segment represents a 15-minute block of time.
To turn the device ON: Push the segments down (or pull them out, depending on the specific model variation) for the duration you want the power to run.
To keep the device OFF: Leave the segments in their original position. 3. Set the Operation Mode
On the side or face of the timer, there is a manual slide switch.
Clock Icon (Auto): The timer follows your programmed schedule.
I (Permanent ON): The timer provides constant power regardless of the dial position.
O (Permanent OFF): The timer cuts all power to the connected device. Safety and Usage Tips
Do Not Exceed Load Limits: Check the back of the device for the maximum wattage. Do not plug in heavy-duty heaters or large air conditioners if they exceed the rated capacity.
Indoor Use Only: The BP 10140 is not waterproof. Keep it away from moisture and outdoor elements.
Firm Connection: Ensure the timer is pushed firmly into the wall socket and that your appliance plug is fully seated in the timer. Troubleshooting Common Issues The timer is not turning on:
Ensure the manual switch is set to the "Auto" or "Clock" position. Check that the wall outlet has power.
Verify that the segments are pushed all the way in/out for the desired time slot. The time is incorrect:
Mechanical timers stop moving if there is a power outage. If the power goes out, you must manually reset the current time on the dial once power is restored.
By following these simple steps, the Hager BP 10140 will provide years of energy-saving automation for your home. Its mechanical design ensures that your settings remain visible at a glance, offering a "set it and forget it" solution for modern living.
If you tell me what you're planning to automate, I can suggest the best timing intervals or load safety checks for that specific device.
Hager Controls BP 10140 " typically refers to the Hager EG103 Digital Time Switch
, a programmable single-channel timer often used for scheduling lights, heating, or industrial equipment. "BP 10140" is an address code for Hager's headquarters in France and is frequently printed on the device label alongside the actual model number ( ⚡ Core Features ( The "BP 10140" designation refers to the headquarters
This device is a digital 24-hour/7-day timer designed for DIN-rail mounting. Programmable Cycles: Daily or weekly schedules. Switching Capacity: 16A at 250V AC. Memory: 56 programming steps available.
Power Reserve: Maintains time and settings for up to several years during power outages. 🛠️ Quick Programming Guide
If you are using the manual buttons on the front of the unit, follow these steps: 1. Set the Current Time Press Menu and use + / - to find the time setting option.
Enter the current Hour, then Minutes, and the Day (1=Monday, 7=Sunday). 2. Create a New Program (PROG) Press Menu until PROG flashes, then press OK.
Select Days: Choose specific days or a group (e.g., all 7 days) by pressing OK when the day number stops flashing.
Set ON Time: Adjust the hour and minutes for when the load should turn on, then press OK.
Set OFF Time: Adjust the hour and minutes for when it should turn off, then press OK. 3. Verification & Manual Override
I’m unable to locate a specific manual for “Hager Controls BP 10140” — it’s possible the model number is slightly different or the manual is not widely digitized.
Here’s what you can do to find the correct manual:
Check the exact label on your device
Look for the full model number (e.g., BP10140, BP 10140, or something like BPT 10140). Hager often uses prefixes like “BP” for portable controllers or battery packs.
Visit Hager’s official website
Go to hager.com → Support → Downloads / Manuals. Search for “BP 10140” or just “BP”.
Contact Hager technical support
They can email you the PDF if it exists.
(Regional Hager sites — e.g., Hager UK, Hager Germany — may have different product lines.)
Search by visible features
If you describe the device (e.g., is it a battery-powered programmer, a room thermostat, a portable control unit for heating?), I can help find an equivalent manual from a similar Hager model.
If you can share a photo of the label or describe what the device controls (heating, lighting, industrial panel, etc.), I’ll narrow it down for you.
" is not actually a product model, but part of the manufacturer’s mailing address: B.P. 10140, 67703 Saverne Cedex, France
Based on common listings and the context of Hager products, the device you are likely looking for is the Hager EG103 Digital Time Switch Go to product viewer dialog for this item.
(often paired with the address on labels). Below is a write-up on its functions and manual operation. eBay Australia Hager EG103 Digital Time Switch Hager EG103
is a digital time switch used to automate electrical loads such as lighting, heating, or ventilation systems
. It features a compact DIN-rail mounting design and a clear digital display for programming. Key Features & Manual Operation Manual Override
: You can manually activate or deactivate the connected load at any time without affecting the stored program. Mode Selection
: To switch between modes, use the "menu" button to select "manu" (manual) or "auto" (automatic). Programming
: It supports weekly programming where you can set specific "On" and "Off" times for different days or groups of days. Memory Key (Optional)
: Some versions allow you to save and load programs using a portable memory key, which is useful for duplicating settings across multiple devices. Battery Backup
: The device typically includes a lithium battery to maintain the time and saved programs during power outages. Basic Setup Instructions Setting Time and Date
: Access the "prog" mode via the menu to adjust the current year, month, day, and hour. Creating a New Program
: Select "new prog," choose the days of the week, and set the desired switching times using the "+" and "-" buttons. Manual Intervention
: If you need to force the state of the load, use the front interface buttons to toggle "On" or "Off" directly while in manual mode. Technical Specifications Device components - Hager
Introduction
The Hager Controls BP 10140 Manual Portable is a device designed for controlling and monitoring electrical installations. As a portable device, it offers flexibility and convenience for users to manage their electrical systems from anywhere. This report provides an overview of the device's features, technical specifications, and user manual. Person B: The Ventilator
Device Overview
The Hager Controls BP 10140 Manual Portable is a battery-powered, handheld device used for controlling and monitoring electrical installations. It is designed to work with Hager's range of electrical devices and systems. The device features a user-friendly interface, allowing users to easily navigate and configure settings.
Technical Specifications
User Manual
The user manual for the Hager Controls BP 10140 Manual Portable provides detailed instructions on how to use the device. The manual covers the following topics:
Key Features
Applications
The Hager Controls BP 10140 Manual Portable is suitable for a range of applications, including:
Conclusion
The Hager Controls BP 10140 Manual Portable is a versatile device designed for controlling and monitoring electrical installations. Its portability, user-friendly interface, and range of features make it an ideal solution for users who need to manage their electrical systems from anywhere.
Recommendations
Limitations
Hager BP 10140 is a specific technical reference for a digital time switch , often marketed under the primary model number
. This device is used to program electrical loads (like lighting or heating) on a 24-hour or weekly schedule. eBay Australia 1. Device Layout & Key Features Shows current time, date, and operating mode (Auto/Manual). Typically includes buttons for navigation. Manual Override:
Allows you to force the state ON or OFF regardless of the program. Battery Backup: Retains programmed settings even during a power outage. 2. Programming Guide (Step-by-Step)
To set a standard schedule (e.g., ON at 09:00, OFF at 16:00), follow these steps as outlined in the Hager EG103 Walkthrough Enter Programming Mode: button until flashes on the screen. Press to select it. Select Days: Days are numbered 1–7 (1 is Monday, 7 is Sunday).
on each day you want included. When the day number stops flashing, it is selected. Set "ON" Time: The screen will prompt for "ON." Use to set the hour and press to set the minutes and press Set "OFF" Time: The screen will prompt for "OFF." Use to set the hour and press to set the minutes and press Verify & Return: Scroll through the settings using to ensure they are correct, then press to return to 3. Manual Operation & Override If you need to bypass the timer temporarily: Manual Mode: Access the menu and move the cursor to Temporary Override:
Many Hager digital switches allow you to toggle the current state (ON to OFF or vice versa) by pressing a specific combination (often
simultaneously), which will automatically revert at the next programmed step. 4. Installation & Safety
Connect the neutral wire directly to the load. The line wire goes to the timer, with a loop from the line to terminal 1. The load then connects to terminal 2. Protection: The circuit must be protected by a 10A circuit breaker To return to factory settings, look for the parameter in the menu and select "Yes".
For detailed technical diagrams, you can refer to the official Hager User Instructions database for a particular device? Bn,.: M ` - Hager
Disclaimer: This guide is intended to provide a comprehensive operational overview of devices commonly identified by the model number BP 10140 (often associated with manual resuscitation bags/BVMs in medical contexts). It is for educational and training purposes only. It does not replace official manufacturer instructions, institutional protocols, or professional medical training. Always consult the specific user manual provided with your device for exact specifications.
The Industrial Workhorse for On-Site Calibration and Control
When field service technicians and plant operators need reliable, portable control without relying on a live computer or complex wiring, the Hager Controls BP 10140 delivers. Designed as a self-contained manual portable station, this unit bridges the gap between full automation and hands-on override capability.
There is a secondary interpretation of the keyword "portable." Savvy technicians use the BP 10140 itself as a portable testing tool.
While the BP 10140 is reliable, you might wonder why not use a micro PLC or a smart relay. Here’s a quick comparison:
| Feature | Hager BP 10140 | Modern PLC (e.g., Siemens Logo) | |--------|----------------|----------------------------------| | Cost | Low (~$50-80 used) | Medium (~$150-300) | | Ease of portable use | Excellent (no programming) | Requires software/laptop | | Flexibility | Limited to 5-7 timing modes | Unlimited logic | | Manual availability | Legacy – harder to find | Excellent online | | Best for | Simple fixed timing tasks | Complex, changeable logic |
For purely portable, manual, or field testing, the BP 10140 remains a solid choice.