How To Hard Reset Myki Watch 4 ((free)) Guide

How to Hard Reset MYKI Watch 4: A Step-by-Step Guide

Are you experiencing issues with your MYKI Watch 4, such as freezing, crashing, or failing to respond to touch? If so, a hard reset may be the solution you need. A hard reset, also known as a factory reset, will erase all data on your watch and restore it to its original settings. This can be a bit drastic, but it's often the most effective way to resolve persistent problems. In this article, we'll walk you through the process of how to hard reset your MYKI Watch 4.

Before You Begin: Backup Your Data

Before you perform a hard reset, it's essential to backup any important data on your MYKI Watch 4. This includes:

  • Contacts
  • Calendar events
  • Fitness tracking data
  • Watch faces and settings

To backup your data, you'll need to sync your watch with your smartphone or computer. You can do this using the MYKI app, which is available for both iOS and Android devices. Once you've synced your data, you can proceed with the hard reset process.

Method 1: Hard Reset Using the Watch Menu

The easiest way to hard reset your MYKI Watch 4 is through the watch menu. Here's how:

  1. Press and hold the power button on your watch until the menu appears.
  2. Scroll down to the "Settings" option and select it.
  3. Scroll down to the "System" option and select it.
  4. Scroll down to the "Reset" option and select it.
  5. Select "Factory Reset" to confirm that you want to reset your watch.
  6. Enter your PIN (if you have one set up) to confirm the reset.
  7. Wait for the reset process to complete. This may take a few minutes.

Method 2: Hard Reset Using the MYKI App

If your watch is frozen or unresponsive, you may not be able to access the menu. In this case, you can use the MYKI app to perform a hard reset. Here's how:

  1. Open the MYKI app on your smartphone or tablet.
  2. Make sure your watch is connected to your device via Bluetooth.
  3. Go to the "Settings" section of the app.
  4. Scroll down to the "System" option and select it.
  5. Select "Reset Watch" to initiate the hard reset process.
  6. Confirm that you want to reset your watch by selecting "Yes".
  7. Wait for the reset process to complete. This may take a few minutes.

Method 3: Hard Reset Using the Hardware Buttons

If your watch is completely unresponsive, you can use the hardware buttons to perform a hard reset. Here's how:

  1. Press and hold the power button and the volume down button simultaneously for at least 10 seconds.
  2. Release the power button but continue to hold the volume down button for another 5 seconds.
  3. Release the volume down button and press it again to confirm the reset.
  4. Wait for the reset process to complete. This may take a few minutes.

What to Do After a Hard Reset

Once your MYKI Watch 4 has been hard reset, you'll need to set it up again from scratch. Here's what to do:

  1. Pair your watch with your smartphone or tablet using the MYKI app.
  2. Restore your backup data (if you created one).
  3. Reinstall any watch faces or apps that you had previously installed.
  4. Reconfigure your watch settings, such as the time, date, and units.

Tips and Precautions

Before you perform a hard reset, keep the following tips and precautions in mind:

  • Backup your data: As mentioned earlier, a hard reset will erase all data on your watch. Make sure to backup any important data before proceeding.
  • Charge your watch: A hard reset can take a few minutes to complete. Make sure your watch is fully charged or connected to a power source.
  • Be patient: The hard reset process can take a few minutes to complete. Be patient and do not interrupt the process.
  • Re-pair your watch: After a hard reset, you may need to re-pair your watch with your smartphone or tablet.

Conclusion

How to Hard Reset MyKi Watch 4: A Step-by-Step Guide Performing a hard reset on your MyKi Watch 4 can resolve persistent technical glitches, clear personal data before selling the device, or fix connectivity issues with the parent app. Because these watches are designed for child safety, the reset process is more secure than a standard smartwatch and often requires a paired smartphone or a specific dialer code.

Below are the most effective methods to restore your device to factory settings. Method 1: The SMS Command Method (Most Reliable)

This method is ideal if the watch is paired with a phone but you cannot access the watch's internal menus. You will need a working SIM card inside the watch with active SMS service.

Check Connection: Ensure the watch is turned on and has a cellular signal.

Open Messaging: On the parent's phone, open your primary text messaging app.

Send the Reset Code: Send a text message to the watch's phone number with one of the following codes: pw,123456,factory# pw,523681,factory#

Note: Commands are case-sensitive; use lowercase exactly as shown.

Wait for Confirmation: You should receive a reply from the watch stating "factory ok, reset...".

Reboot: The watch will automatically restart and wipe all data. Method 2: Using the Watch Dialer

If you have physical access to the watch and it is responsive, you can initiate a reset directly from the interface using a hidden service code.

Wake the Device: Press the Power button to turn on the screen. How to Hard Reset MYKI Watch 4

Open Dialer: Navigate to and open the Dial application on the watch. Enter Code: Type in *#174714# using the on-screen keypad.

Confirm: Tap the Call button. A popup will appear asking for confirmation; tap Yes.

Resetting: The device will begin the wipe process. Do not turn it off until it finishes. Method 3: Unpairing via the MyKi Watch App

For many users, the "reset" is part of a re-registration process. To completely clear the watch's association with your account, you must unpair it via the official app. Launch App: Open the MyKi Watch app on your smartphone.

Settings: Go to the settings menu for your specific MyKi 4 device.

Remove Device: Look for the option to "Remove Watch" or "Restore Factory Settings".

Clear App Cache: To ensure a clean start, you can also go to the "Me" tab in the app, select Settings, and tap "Clear Data" to remove cached info from the phone. Troubleshooting Common Issues

SIM Card Requirement: MyKi watches often require an active SIM card to process reset commands sent from the app or via SMS.

Battery Level: Ensure the watch has at least 30% battery before starting. If it dies during a hard reset, it can permanently damage the software.

QR Code Not Appearing: If the watch is reset but won't show the registration QR code, check that the SIM card has active mobile data and the PIN code is disabled.

To hard reset your MYKI Watch 4, you can use a few different methods depending on whether you can still use the watch screen or if you need to do it remotely. 1. Dial Code Method (Quickest) If you can still navigate the watch's interface: Wake up the screen by pressing the Power button . Open the Dial application on the watch . Enter the following code: *#174714# .

Tap the call button and select Yes when the confirmation popup appears to begin the reset . 2. SMS Command Method (Remote Reset)

If the watch is unresponsive, you can reset it by sending a text message from the parent's phone paired with the SeTracker 2 app: How to Hard Reset MYKI Watch 4: A

Ensure the watch has a working Nano SIM card and is powered on . From your phone, send an SMS to the watch's phone number .

Type either pw,123456,factory# or pw,523681,factory# (the code depends on your specific model's default password) .

Wait for a reply from the watch saying "factory ok, reset.." The device will then reboot and restore factory settings . 3. Force Restart (Soft Reset)

If you just need to unfreeze the device without deleting data:

Press and hold the Power button until the screen goes black .

Wait a few seconds, then hold the Power button again to turn it back on . Feature Idea: "Safe-Home" Visual Navigation

Since the MYKI Watch 4 is designed for kids and features Triple Localization (GPS, Wi-Fi, LBS) , a great additional feature would be "Safe-Home" Visual Navigation.

How it works: Instead of standard maps, the watch would use large, child-friendly directional arrows and landmark icons (like a park or a grocery store) to guide a child back to a "Safe Zone" set by parents .

Why it's useful: Younger children may not know how to read a map, but they can follow a "green arrow" pointing home. If they wander outside a Pre-defined Security Zone, the watch could automatically trigger this mode to help them find their way back while notifying the parent via the MyKi App . Hard Reset MYKI Watch 4

⚠️ Warning: A hard reset (also called a factory reset) will erase all personal data, including activity history, alarms, and settings. It will not remove the watch from your MYKI app account—you need to unpair it separately for that.

Troubleshooting: Common Issues After a Hard Reset

Final Note

If your MYKI Watch 4 is still under warranty and you are resetting it due to a malfunction (e.g., not syncing, battery drain, screen issues), perform the hard reset only after trying a simple restart (turn off/on). If problems persist after a hard reset, contact MYKI customer support – the device may have a hardware defect.

Method 3: Hard Reset via the Companion App (GloryFit / Da Fit)

Some versions of the MYKI Watch 4 allow a remote reset through the official smartphone app. This is useful if the screen is broken or unreadable.

Scroll to Top