Hp Fxn1 E93839 Motherboard Specs -

The HP E93839 FXN1 Go to product viewer dialog for this item.

motherboard is a proprietary OEM board used in various HP business desktops, most notably the HP Compaq 8200 Elite and EliteDesk G3 series. Because HP uses the "E93839" designation across multiple generations, there are two primary variants with significantly different specs. Variant 1: LGA 1155 (Legacy/8200 Elite)

This older version is commonly found in 2nd-gen Intel systems like the HP Compaq 8200 Elite Go to product viewer dialog for this item. Socket: LGA 1155 (Socket H2).

CPU Support: Intel Core i3, i5, i7 (2nd generation Sandy Bridge). Memory: 4 slots supporting DDR3 SDRAM.

Form Factor: Small Form Factor (SFF) or Ultra-Slim Desktop (USDT). Connectivity: VGA, DisplayPort, USB 2.0, RJ-45 Ethernet. Variant 2: LGA 1151 (Modern/G3 Series) This newer version is designed for 6th-gen Intel systems.

Socket: LGA 1151 (Note: Some listings mistakenly cite LGA 1155 for these CPUs, but the i5-6500 requires 1151).

CPU Support: Intel 6th Generation (Skylake), such as the i5-6500. Memory: 4 slots supporting DDR4 SDRAM. Form Factor: Modified/Proprietary ATX. Connectivity: DisplayPort, USB-C, USB 2.0, eSATA, SATA II. Critical Compatibility Notes

Proprietary Design: These boards are not standard ATX. They typically use proprietary power connectors (not a standard 24-pin) and specific mounting holes meant for original HP cases.

Power Supply: You must use an original HP power supply or a specialized adapter because they do not use standard ATX power standards.

Replacement Options: If you are looking for a replacement, merchants on eBay and Newegg offer used units ranging from $15 to $150 depending on the specific revision and included CPU.

Are you planning to replace a dead board or upgrade the CPU in your current HP system? HP motherboard E93839 FXN1 With Intel I5-6500 - eBay

The HP FXN1 E93839 is a legacy motherboard most commonly identified with the HP Compaq 8200 Elite Small Form Factor (SFF) desktop series. Designed for business reliability, it is a robust choice for budget-conscious users looking to maintain or lightly upgrade older hardware. Core Technical Specifications FXN1 E93839

is built on the Intel Q67 Express chipset and utilizes the LGA 1155 socket. While some generic product listings may mention newer generations, the official HP configuration for this specific board model (FXN1) is centered on 2nd Generation Intel Core (Sandy Bridge) processors. Socket Type: LGA 1155 (Socket H2). Chipset: Intel Q67 Express.

CPU Support: Select Intel Core i3, i5, and i7 (2nd Gen), as well as Pentium and Celeron models. Popular compatible CPUs include the i7-2600 and i5-2400. Memory: Type: DDR3 SDRAM. Slots: 4 DIMM slots. Capacity: Supports up to 32GB of RAM (8GB per slot).

Form Factor: Custom Small Form Factor (SFF) specific to HP Elite 8200 chassis. Connectivity and Expansion

Despite its age, the motherboard offers a variety of legacy and essential ports for standard office or home use: HP motherboard E93839 FXN1 With Intel I5-6500 - eBay

The HP E93839 FXN1 Go to product viewer dialog for this item.

is a proprietary motherboard used across several generations of HP commercial desktops, such as the EliteDesk and Compaq Elite series. Because HP uses "E93839" as a general regulatory or factory part number, specifications vary significantly depending on the specific PC model it was pulled from.

The most common version found in the secondary market belongs to the HP Compaq 8200 Elite or 8300 Elite series. 🛠️ Core Technical Specifications (8200/8300 Series)

These specs apply to the most prevalent Intel-based version of this board. Socket Type: LGA 1155 (Socket H2) Chipset: Intel Q67 or Q77 Express

Form Factor: Proprietary "Modified ATX" (designed specifically for HP SFF or CMT chassis) Memory: Type: DDR3 SDRAM (Non-ECC) Slots: 4 DIMM slots Max Capacity: Up to 32 GB (4 x 8 GB) on 64-bit systems Speed: Supports 1333 MHz and 1600 MHz 🔌 Expansion & I/O Ports hp fxn1 e93839 motherboard specs

The board is built for office stability rather than high-end gaming, but it offers several expansion options. Expansion Slots How to find out compatible CPU for Upgrade - HP Community

The HP FX N1 (E93839) is a motherboard primarily found in HP All-in-One (AiO) PCs and some small-form-factor desktops, typically from the HP Pavilion 23/21 or HP Compaq Elite series.

Here are the key specs and a useful feature you can leverage.

The Epilogue: Where Are They Now?

Today, the HP FXN1 E93839 lives in three places:

1. The Landfill: Sadly, millions of these were scrapped as companies upgraded to smaller, faster, SSD-driven machines.
2. The Hobbyist's Bench: Because the LGA 775 platform is incredibly cheap, retro-PC gamers hunt for these boards. They pair them with a Core 2 Quad CPU and a budget GPU to build a "Windows XP Time Machine" capable of playing classic games like Half-Life 2 or Age of Empires II.
3. The Server Closet: Some survive as low-power home servers (NAS) or firewall routers (running software like pfSense) because they are cheap, reliable, and have enough PCIe slots for network cards.

The Verdict: The HP FXN1 E93839 motherboard is not a legend. It is not a collector's item worth thousands. It is a fossil of the "Beige Age"—a sturdy, unassuming piece of green fiberglass that powered the global economy, one spreadsheet at a time. It represents a time when a "Quad Core" processor was the pinnacle of technology and 4GB of RAM felt like infinite space.

HP FXN1 E93839 Motherboard Specs: A Comprehensive Overview

The HP FXN1 E93839 motherboard is a highly sought-after component in the world of computer hardware. As a vital part of HP's FXN1 series, this motherboard is designed to provide users with a reliable and efficient computing experience. In this article, we will delve into the specifications of the HP FXN1 E93839 motherboard, exploring its key features, technical details, and compatibility.

Overview of the HP FXN1 E93839 Motherboard

The HP FXN1 E93839 motherboard is a micro-ATX form factor board, measuring 240mm x 240mm. It is designed to support a range of HP processors, including Intel Core i3, i5, and i7 processors, as well as AMD A-series processors. This motherboard is built with a robust design, featuring a solid capacitor and a durable printed circuit board (PCB) that ensures stability and longevity.

Key Specifications:

• Form Factor: Micro-ATX (240mm x 240mm)
• Supported Processors: Intel Core i3, i5, and i7 processors (up to 65W); AMD A-series processors (up to 65W)
• Chipset: Intel H61 Express
• Memory: 2 x DDR3 DIMM slots; up to 16GB (2x8GB) DDR3 1333MHz
• Expansion Slots: 1 x PCIe 2.0 x16; 1 x PCIe 2.0 x1; 2 x PCI
• Storage: 4 x SATA 3Gb/s ports; 1 x IDE connector
• USB Ports: 6 x USB 2.0 ports; 2 x USB 3.0 ports
• Graphics: Intel HD Graphics (integrated)
• Audio: 7.1-channel audio (ALC892 codec)
• LAN: Gigabit LAN (Realtek RTL8111E)

Technical Details

The HP FXN1 E93839 motherboard boasts a range of technical features that enhance its performance and functionality. These include:

• Intel H61 Express Chipset: This chipset provides a robust foundation for the motherboard, supporting a range of Intel processors and features.
• DDR3 Memory Support: The motherboard supports up to 16GB of DDR3 memory, ensuring smooth performance and efficient multitasking.
• PCIe and PCI Expansion Slots: The motherboard features a range of expansion slots, including PCIe 2.0 x16, PCIe 2.0 x1, and PCI slots, allowing users to add graphics cards, sound cards, and other peripherals.

Compatibility and Upgrades

The HP FXN1 E93839 motherboard is compatible with a range of HP systems, including the HP Pavilion and HP Envy series. When it comes to upgrades, users can upgrade their processor to a higher-end model, add more memory, or install a dedicated graphics card.

Conclusion

The HP FXN1 E93839 motherboard is a reliable and feature-rich component that provides users with a solid foundation for their computing needs. With its robust design, support for a range of processors, and comprehensive technical features, this motherboard is an excellent choice for users looking to build or upgrade their HP system.

Specifications Summary:

| Specification | Details | | --- | --- | | Form Factor | Micro-ATX (240mm x 240mm) | | Supported Processors | Intel Core i3, i5, and i7 (up to 65W); AMD A-series (up to 65W) | | Chipset | Intel H61 Express | | Memory | 2 x DDR3 DIMM slots; up to 16GB DDR3 1333MHz | | Expansion Slots | 1 x PCIe 2.0 x16; 1 x PCIe 2.0 x1; 2 x PCI |

By understanding the specifications and features of the HP FXN1 E93839 motherboard, users can make informed decisions about their computing needs and ensure a seamless and efficient computing experience.

HP FXN1 E93839 motherboard (often identified by part numbers 611834-001 611794-000 ) is a proprietary system board primarily found in the HP Compaq 8200 Elite The HP E93839 FXN1 Go to product viewer

series. It is designed for business-class reliability in small form factor (SFF) and desktop environments. Core Specifications Form Factor : Custom uATX / SFF (Small Form Factor). : Intel Q67 Express. : LGA 1155 (Socket H2). CPU Support

: 2nd Generation Intel Core i3, i5, and i7 processors (Sandy Bridge).

Note: Later revisions labeled "E93839" may support newer sockets (e.g., LGA 1150 or 1151), so check your specific socket carefully. Memory & Expansion HP motherboard E93839 FXN1 With Intel I5-6500 - eBay

The HP FXN1 E93839 Go to product viewer dialog for this item.

is a proprietary motherboard primarily used in HP's business-class desktops, such as the HP Compaq 8200 Elite and EliteDesk 800 G3 series. Because "E93839" is a regulatory mark rather than a unique model number, specifications vary significantly depending on the specific HP generation it belongs to. Common Variations & Key Specifications

The most frequent versions of this motherboard are found in the following configurations: Version A: HP 8200 Elite / 6200 Pro Series Socket Type: LGA 1155 (Socket H2).

Processor Support: Intel 2nd and 3rd Generation Core i3, i5, and i7 processors (e.g., i5-2400, i7-3770). Memory: Typically 4 slots supporting DDR3 SDRAM.

Form Factor: Small Form Factor (SFF) or proprietary modified ATX. I/O Ports: VGA, DisplayPort, and multiple USB 2.0 ports. Version B: HP EliteDesk 705 / 800 G3 Series Socket Type: LGA 1151 or AM4 (for AMD variants).

Processor Support: Intel 6th and 7th Generation CPUs (e.g., i5-6500) or AMD Ryzen processors.

Memory: Supports DDR4 SDRAM (up to 64GB in some configurations).

Connectivity: Modern ports including USB-C, DisplayPort, and eSATA. Technical Details & Features

Expansion Slots: Includes at least one PCI Express x16 slot for low-profile graphics cards.

Integrated Graphics: Features an on-board video chipset (requires a CPU with integrated graphics).

Power Supply: Often requires proprietary HP power connectors rather than standard 24-pin ATX cables. Audio: Standard on-board high-definition audio. Important Considerations for Upgraders

Proprietary Design: These boards are often designed for specific HP cases. Mounting holes and power connectors may not align with standard aftermarket PC cases.

Power Limits: Small Form Factor (SFF) versions usually pair with 240W or 250W power supplies, limiting the type of dedicated graphics cards you can add. How to Check Your PC's Specs and What They Mean - HP

The HP FXN1 E93839 (often associated with the HP ProDesk or EliteDesk series) is an OEM motherboard designed for business-class desktops. It is built for reliability and standard office tasks rather than high-end gaming or heavy workstation use.  Core Specifications  Socket: Intel LGA 1151

Chipset: Intel Q270 (typically found in the G3 series of HP business desktops)

Form Factor: Proprietary (designed specifically for HP SFF or MT chassis) Processor Support: 6th Generation Intel Core (Skylake) 7th Generation Intel Core (Kaby Lake) Supports i3, i5, i7, Pentium, and Celeron processors  Memory (RAM)  Slots: 4 DIMM slots Type: DDR4 SDRAM Speed: Supports up to 2400 MHz (depending on the CPU) Maximum Capacity: Up to 64 GB  Expansion & Connectivity  PCI Express Slots: 1 x PCIe x16 (for dedicated graphics) 1 x PCIe x4 1 x M.2 PCIe x4 (specifically for high-speed NVMe SSDs) Storage: 3 to 4 SATA III (6.0 Gb/s) ports Networking: Integrated Intel I219LM Gigabit Ethernet  Rear I/O Panel (Common Configuration)  USB: Multiple USB 3.0/3.1 Gen 1 ports

Video: 2 x DisplayPort, 1 x VGA (optional in some configurations) Audio: Line-in and Line-out jacks The Landfill: Sadly, millions of these were scrapped

Legacy: PS/2 ports for keyboard and mouse (on specific models)  Important Note on Compatibility 

Because this is a proprietary HP motherboard, it uses a non-standard power connector. You cannot use a standard ATX power supply without a specialized adapter. Additionally, the mounting holes may not align with standard ATX or Micro-ATX cases. 

To give you the most accurate details for your specific setup, could you tell me:  Are you looking to upgrade the CPU or RAM? Do you need to know if a specific graphics card will fit?

What is the model name of the PC case it came out of (e.g., HP ProDesk 600 G3)? 

HP FXN1 E93839 is a proprietary motherboard commonly found in business-class desktops, such as the HP ProDesk 600 G3

series. It is designed for reliability in professional environments, offering a modified ATX form factor that fits specific HP chassis. Key Specifications

The FXN1 E93839 is built to support 6th and 7th Generation Intel technology, making it a solid choice for standard office tasks and moderate multitasking. Processor Support: Designed for the Intel LGA 1151

socket, supporting 6th Gen (Skylake) and 7th Gen (Kaby Lake) Core i3, i5, and i7 processors. 4x DDR4 DIMM slots

, typically supporting up to 64GB of RAM (Non-ECC, unbuffered). Expansion Slots: 1x PCIe x16 (for dedicated graphics) 1x PCIe x4 (open-ended or x16 physical) M.2 slots for NVMe SSDs and Wi-Fi cards Rear I/O Ports: 2x DisplayPort (some variants include VGA or HDMI) Multiple USB 3.0/3.1 Gen 1 ports and often 1x Networking: Integrated Gigabit Ethernet (RJ-45) Standard Line-in/Line-out jacks HP Support Community Usage and Compatibility Notes Proprietary Design: Because this is an HP OEM board, it uses non-standard power connectors

(typically 6-pin or similar) rather than the standard 24-pin ATX connector found on aftermarket power supplies. Chassis Fit:

It is intended for HP's Small Form Factor (SFF) or Microtower (MT) cases. Due to the unique mounting hole patterns and front-panel headers, it is difficult to install in a standard third-party PC case without significant modification. Reliability:

As a business-grade component, it is engineered for long-term stability and 24/7 operation.

If you are looking to buy or sell this part, you can find listings on marketplaces like or specialized parts retailers.

RAM Compatibility with Motherboard - HP Support Community - 8643254

4. RAM Specifications & Upgrade Path

The HP FXN1 E93839 is picky about RAM. It only has two DIMM slots, so you cannot run four sticks of RAM.

• Maximum Capacity: 16GB (2 x 8GB modules).
• Type: DDR3, 1.5V (low-voltage 1.35V DDR3L may work but is not officially supported in all BIOS versions).
• Speed: 1600MHz modules will work but may be downclocked to 1333MHz if you install a CPU with a slower memory controller (e.g., an i3 or Pentium).
• Dual Channel: For best performance, install matched pairs (same capacity, same speed, same brand).

What to Avoid:

• ECC (Error Correcting Code) RAM – not supported.
• DDR2 or DDR4 – physically incompatible.
• Mixing RAM sizes (e.g., 4GB + 8GB) – forces single-channel mode, reducing memory bandwidth by up to 50%.

Recommended Upgrade: Corsair Vengeance or Kingston HyperX DDR3 1600MHz (2x8GB kit).

HP FXN1 (E93839) Motherboard: Complete Specs, Upgrades, and Compatibility Guide

When you open a prebuilt desktop PC from a major manufacturer like HP, you don’t usually find a standard off-the-shelf motherboard. Instead, you find custom boards designed specifically for that chassis and power supply. The HP FXN1, also identified by the spare part number E93839, is one such proprietary motherboard.

If you have acquired this board (either inside an HP Pavilion or as a replacement part), you need to understand exactly what it supports. This article provides a deep dive into the technical specifications, CPU compatibility, RAM limitations, expansion slots, and common troubleshooting tips for the HP FXN1 (E93839).

Where to find more:

• Look for HP Pavilion 23-1020 or 21-a010 service manuals – they use this board.
• Search "HP E93839 schematic" for pinouts.

Chapter 5: Connectivity and I/O

The "I/O Shield" area (the back of the PC) tells the story of transition.

• PS/2 Ports: The board stubbornly retains the purple and green circular ports for the keyboard and mouse. Why? Because in 2008, businesses had warehouses full of expensive, mechanical keyboards and rugged mice that still used these legacy ports. HP was catering to the "if it ain't broke, don't fix it" crowd.
• USB 2.0: There are usually six to eight USB 2.0 ports. Note the version: 2.0. This was the standard before the blue ports of USB 3.0 arrived. Fast enough for flash drives and printers, but slow by today's standards.
• The LAN: An RJ-45 port, usually powered by a Realtek chipset, ensured the PC could jack into the corporate intranet at 10/100 or 1000 Mbps speeds.
• Audio: Six 3.5mm jacks powered by Realtek, offering 5.1 or 7.1 surround sound—overkill for a secretary, perfect for a media center build.

Caveats:

• Requires compatible LVDS panel resolution (1366x768 or 1920x1080 typical).
• No standard PCIe – cannot add a dedicated GPU.
• Power supply is proprietary; you'll need an original HP AiO PSU or identify pinout to wire your own 12V/19V.