Hpe Smart Array S100i Sr Gen10 Sw Raid Driver For Windows Server 2022 May 2026

The official driver for the HPE Smart Array S100i SR Gen10 SW RAID

on Windows Server 2022 is version 1010.14.0.0(C), released by HPE on September 28, 2022. Driver Details Version: 1010.14.0.0(C) Release Date: September 28, 2022

File Name: Typically provided as an executable (e.g., cp052316.exe) which must be extracted for manual installation.

Official Download: HPE Support Center - S100i Driver for Windows Server 2022. Installation Methods

The S100i driver is not included in standard Windows Server 2022 installation media. Use one of these methods to ensure your drives are recognized:

Intelligent Provisioning (Recommended): Use the assisted installation option in HPE Intelligent Provisioning. This automatically injects the required drivers during the OS setup. Manual Injection:

Download the driver and run the .exe on a separate PC to extract the files to a USB drive.

During the Windows "Where do you want to install Windows?" screen, click Load Driver and point to the folder on your USB drive. The official driver for the HPE Smart Array

iLO Remote Console: You can mount the driver folder as a virtual USB key using the HTML5 Remote Console in iLO for easier access during remote installs. Critical Technical Notes UEFI Only: The

requires the server to be in UEFI Boot Mode. It does not support Legacy BIOS mode.

SATA Only: This controller only supports SATA drives (up to 14 lanes) and basic RAID levels 0, 1, 5, and 10.

Performance: As a software-based RAID solution, it relies on the Windows driver to manage the array. Performance is generally lower than dedicated hardware RAID controllers (like the P-class Smart Array) and may not scale with high-end CPU upgrades.

Gen10 Plus Warning: If you are using a Gen10 Plus server, you likely need the SR100i Gen10 Plus driver instead, which is version 1010.124.100.1005.

HPE Smart Array S100i SR Gen10 SW RAID is an entry-level, driver-based storage solution integrated into HPE ProLiant Gen10 servers. While it provides essential data protection for basic workloads, it is strictly a software-defined

controller that relies on the host CPU for all RAID operations, making it unsuitable for high-performance write-intensive tasks. Key Technical Specifications Driver Support: Fully compatible with Windows Server 2022 via dedicated driver packages. RAID Levels: Supports RAID 0, 1, 5, and 10. Manages up to 14 SATA physical drives at 6Gb/s. Management: Configured through UEFI System Utilities or HPE Smart Storage Administrator (SSA) Boot Mode: UEFI Boot Mode ; Legacy BIOS is not supported. Hewlett Packard Enterprise Performance Analysis Key Characteristics of the S100i:

User and expert reviews consistently highlight a performance bottleneck, particularly with write operations: Hewlett Packard Enterprise Community

The HPE Smart Array S100i SR Gen10 SW RAID Driver for Windows Server 2022

is a critical software component that enables RAID functionality on entry-level HPE ProLiant Gen10 servers. Because the S100i is a software-based RAID (SW RAID) solution, it relies on this specific driver to manage disk arrays directly through the operating system rather than a dedicated hardware chip. Key Specifications & Capabilities S100i SR Gen10

is an ideal entry-level storage solution for non-critical workloads, offering the following features: RAID Levels Supported: 0, 1, 5, and 10.

Storage Interface: 6Gb/s SATA technology with up to 14 SATA lanes.

Drive Support: Compatible with both hot-plug and non-hot-plug SATA drives (HDD and SSD).

Boot Mode: Operates strictly in UEFI Boot Mode; Legacy Boot is not supported. SATA-only : Supports SATA HDDs and SSDs (no SAS drives)

OS Compatibility: Full support for Microsoft Windows Server 2016, 2019, and 2022. Driver Download for Windows Server 2022

The official driver for Windows Server 2022 is version 1010.14.0.0(C) (or newer), released by HPE in late 2022. Official Source: Download the HPE Smart Array S100i SR Gen10 SW RAID Driver from the HPE Support Center

Alternative for Gen10 Plus: If you are using a Gen10 Plus server, you may require the HPE Smart Storage SR100i Gen10 Plus SW RAID Driver instead. Installation Guide: Injecting the Driver

Standard Windows Server 2022 installation media does not include the S100i driver. Without it, the installer will not see your RAID logical volumes. Method 1: Assisted Installation (Recommended)

Use HPE Intelligent Provisioning. This tool automatically injects all necessary drivers, including the S100i RAID driver , during the OS setup process. Method 2: Manual Driver Injection

Key Characteristics of the S100i:

  • SATA-only: Supports SATA HDDs and SSDs (no SAS drives).
  • RAID Levels: RAID 0, 1, 5, and 10.
  • Maximum Drives: Up to 10 internal SATA drives.
  • Dependency: Requires the HPE Dynamic Smart Array driver (.sys file) to function.
  • No FBWC: No Flash-Backed Write Cache (battery/capacitor backup).

The "SR" in "SR Gen10" stands for Software RAID. This distinction is crucial because Windows Server 2022 does not include an inbox driver for the S100i. Without the correct driver, the Windows installer will see zero logical drives, rendering the server useless until the driver is loaded.

Method 3: Post-Installation Driver Update (If OS already on a different drive)

If Windows Server 2022 is already installed on a non-RAID drive (e.g., a separately attached boot SSD) and you need the S100i for data drives:

  1. Boot into Windows Server 2022.
  2. Open Device Manager → Storage Controllers.
  3. Right-click the unknown or generic SATA controller → Update driver.
  4. Point to the extracted HPE driver folder.
  5. Reboot.

5. Backup Configuration File

Back up the S100i configuration using:

ssacli controller slot=0 config file="C:\S100i_backup.cfg" save

This helps recover RAID metadata if the motherboard battery loses settings.