Ipm17-002 Motherboard Manual May 2026

, also commonly known as the motherboard, is a microATX board primarily used in HP OMEN 870-224 HP Envy 750

desktop systems. While HP does not always provide a standalone retail manual, the following guide consolidates its key technical specifications and critical header pinouts. HP Support Community Core Specifications Form Factor: MicroATX (uATX). Intel H170.

LGA 1151, supporting 6th and 7th Generation Intel Core i3, i5, and i7 processors (Skylake/Kaby Lake). Four DDR4 DIMM (288-pin) sockets. Supports dual-channel architecture.

Maximum Capacity: Up to 64GB (though HP officially tested and recommends up to 32GB). Speed: PC4-17000 (DDR4-2133). Expansion Slots: 1x PCI Express x16 (Gen 3.0). 1x M.2 socket 3, key M (typically for SSDs).

1x M.2 socket 1, key A (typically for Wi-Fi/Bluetooth cards). Front Panel Header Pinout (F_PANEL)

The front panel header is critical when moving this motherboard to a new third-party case. It is a 9-pin header located at the bottom-right edge of the board. HP Support Community Description Positive Hard Drive Activity LED Negative Hard Drive Activity LED Power LED + Positive Power LED Power LED - Negative Power LED Power Button Power Switch connection Power Button GND Return/Ground for Power Switch Reset Switch Optional Reset connection Reset return Ground for Reset Switch Not Connected (NC) Missing pin for orientation Onboard Connectors & I/O

Typically includes 5x SATA 3.0 (6Gb/s) ports for storage drives. Internal Headers: 1x USB 3.0 header. 2x USB 2.0 headers. 1x Front Panel Audio header.

1x 4-pin CPU Fan header and 1x 3-pin or 4-pin System Fan header. Rear I/O Ports: 4x USB 2.0 ports. 2x USB 3.0 ports. 1x HDMI and 1x VGA (Integrated graphics output). 1x RJ-45 Ethernet (Gigabit LAN). 3x Audio Jacks (Line-in, Line-out, Mic). Maintenance Procedures Clearing CMOS:

Locate the 3-pin CMOS jumper. Move the jumper from the default pins (1-2) to the clear pins (2-3) for 5–10 seconds while the system is powered off and unplugged, then return it to the default position. BIOS Password Reset:

There is often a dedicated "PASS_CLR" jumper to erase the BIOS administrator password using a similar process to the CMOS clear. The Retro Web of the board layout or specific BIOS update instructions? How to connect front panel connectors to the motherboard 2 Nov 2012 —

Finding a comprehensive IPM17-002 motherboard manual can be difficult because HP (the primary manufacturer) often integrates this board—commonly known as the Odense2-K or IPM17-DD2—into pre-built systems like the OMEN by HP 870-224.

This guide serves as a manual to help you identify pinouts, understand CPU and RAM compatibility, and perform upgrades on this Intel H170 chipset board. Core Specifications Overview

The IPM17-002 is a Micro-ATX (mATX) board designed for high-performance desktop and gaming applications. Chipset: Intel H170. Socket: LGA 1151.

Memory Support: Up to 32GB (some variants support 64GB) DDR4 SDRAM. Form Factor: uATX (24.4 x 24.4 cm). Part Numbers: Often listed as 862992-002 or 862992-602. CPU and RAM Compatibility

Before purchasing upgrades, verify your BIOS version. Upgrading to a 7th Generation "Kaby Lake" processor (like the i7-7700) usually requires a BIOS update, whereas 6th Gen "Skylake" chips work out of the box. MOBO Manual for Omen Motherboard IPM17-002

The IPM17-002 (Odense2-K) is an Intel H170-based micro-ATX motherboard used in HP OMEN 870-224 desktops, supporting 6th/7th Gen Intel CPUs and DDR4 memory. Official documentation is limited, but specifications indicate a 91W TDP limit, an M.2 SSD slot, and a standard 9-pin front panel header layout. For specific support, explore discussions on the HP Support Community HP Support Community MOBO Manual for Omen Motherboard IPM17-002

A Comprehensive Guide to the IPM17-002 Motherboard Manual

The IPM17-002 motherboard is a high-performance, feature-rich mainboard designed for use in a variety of applications, including gaming, content creation, and server environments. As with any complex piece of hardware, understanding the IPM17-002 motherboard manual is crucial to unlocking its full potential. In this article, we'll provide an in-depth look at the IPM17-002 motherboard manual, covering its key features, specifications, and usage guidelines.

Overview of the IPM17-002 Motherboard

The IPM17-002 motherboard is built around the Intel P67 chipset, which provides a robust foundation for high-performance computing. The board supports a range of Intel processors, including Core i3, i5, and i7 models, making it an excellent choice for users seeking to build a powerful desktop system.

Key Features of the IPM17-002 Motherboard

The IPM17-002 motherboard boasts an impressive array of features, including:

Support for Intel LGA 1155 processors: The IPM17-002 motherboard is designed to work with Intel's LGA 1155 socket processors, providing users with a wide range of CPU options.
Dual-channel DDR3 memory support: The board supports up to 16GB of DDR3 memory, with speeds of up to 1333MHz.
Multiple expansion slots: The IPM17-002 motherboard features a range of expansion slots, including two PCIe 2.0 x16 slots, two PCIe 2.0 x1 slots, and two PCI slots.
High-quality audio and networking: The board features 7.1-channel audio, as well as Gigabit Ethernet and Wi-Fi connectivity options.

Navigating the IPM17-002 Motherboard Manual

The IPM17-002 motherboard manual is a comprehensive guide that covers all aspects of the board's installation, configuration, and usage. The manual is divided into several sections, including:

Introduction: This section provides an overview of the IPM17-002 motherboard, including its key features and specifications.
Hardware Installation: This section provides step-by-step instructions for installing the motherboard and its components, including the CPU, memory, and expansion cards.
BIOS Setup: This section explains how to configure the motherboard's BIOS settings, including options for adjusting clock speeds, voltages, and other system parameters.
Troubleshooting: This section provides guidance on troubleshooting common issues with the motherboard, including boot problems, memory errors, and other faults.

Understanding the IPM17-002 Motherboard Layout

The IPM17-002 motherboard manual includes a detailed layout diagram, which shows the location of key components, including:

CPU socket: The LGA 1155 socket for the Intel processor.
Memory slots: The four DDR3 memory slots, which support dual-channel memory configurations.
Expansion slots: The PCIe 2.0 x16, PCIe 2.0 x1, and PCI slots for adding graphics cards, sound cards, and other expansion cards.
Storage connectors: The SATA and M.2 connectors for connecting storage devices.

Configuring the IPM17-002 Motherboard BIOS

The IPM17-002 motherboard manual provides detailed instructions for configuring the BIOS settings, including:

Main Menu: The main BIOS menu, which provides an overview of system settings, including the CPU, memory, and boot devices.
Advanced Settings: This menu provides access to advanced system settings, including clock speeds, voltages, and other system parameters.
Security Settings: This menu allows users to configure security settings, including passwords and boot device priorities.

Troubleshooting Common Issues

The IPM17-002 motherboard manual includes a troubleshooting section, which provides guidance on resolving common issues, including:

Boot problems: Troubleshooting steps for boot-related issues, including boot loops and failed boots.
Memory errors: Troubleshooting steps for memory-related issues, including memory errors and crashes.
Overheating: Troubleshooting steps for overheating issues, including fan configuration and heatsink installation.

Conclusion

The IPM17-002 motherboard manual is a comprehensive guide that provides users with a detailed understanding of the board's features, specifications, and usage guidelines. By following the instructions and guidelines outlined in the manual, users can unlock the full potential of the IPM17-002 motherboard, building a high-performance desktop system that meets their specific needs.

Downloads and Additional Resources

For users seeking additional information or support, the IPM17-002 motherboard manual can be downloaded from the manufacturer's website. Additionally, users can access online forums, technical support resources, and other documentation to help them get the most out of their IPM17-002 motherboard.

Specifications

CPU Support: Intel LGA 1155 processors
Memory Support: Up to 16GB DDR3 memory, speeds up to 1333MHz
Expansion Slots: 2x PCIe 2.0 x16, 2x PCIe 2.0 x1, 2x PCI
Audio: 7.1-channel audio
Networking: Gigabit Ethernet, Wi-Fi

Dimensions

Form Factor: ATX
Dimensions: 305mm x 244mm

Warranty

Warranty Period: 3 years

By understanding the IPM17-002 motherboard manual, users can unlock the full potential of their system, enjoying a high-performance computing experience that meets their specific needs. Whether you're a seasoned builder or new to the world of PC hardware, the IPM17-002 motherboard manual is an essential resource that will help you get the most out of your system.

The HP IPM17-002 motherboard , also frequently identified as the or Go to product viewer dialog for this item.

, is a micro-ATX (uATX) system board commonly found in the HP Envy 750, Pavilion 580, and Omen 870 desktop series. Because HP typically provides general desktop manuals rather than standalone motherboard guides, users often rely on archived technical specifications and community-verified pinouts for maintenance and upgrades. Core Specifications

This motherboard is designed around the Intel H170 chipset and utilizes the LGA 1151 socket, making it compatible with 6th generation (Skylake) and 7th generation (Kaby Lake) Intel Core processors. Searching for Motherboard Manual ipm17 DD2 - HP Community

This report provides technical specifications and layout details for the

motherboard, frequently referred to in HP community discussions as the "IPM17-002" or Odense2-K. HP Support Community

This motherboard is primarily found in HP OMEN 870-224 and HP Envy 750 desktop series. HP Support Community Technical Specifications (HP Odense2-K / IPM17-DD2) Manufacturer: Pegatron (custom for HP) Form Factor: Micro-ATX (uATX) Processor Support:

Intel Core i7-7700 (Kabylake), i5-7600K, i5-7400, i3-7100 (Socket LGA 1151) Intel H170 Memory Support:

Two DDR4 SODIMM (260-pin) sockets, supporting up to DDR4-2400MHz Maximum Memory:

Up to 32 GB (unbuffered) with two 16 GB DIMMs on 64-bit systems Expansion Slots: 1x PCI Express x16, 1x PCI Express x1, 1x M.2 (for SSD) Networking: 802.11 a/b/g/n/ac M.2 wireless card HP Support Community Motherboard Layout and Connectors Front Panel Header (F_PANEL): 9-pin header located at the bottom right edge. SATA Connectors: 6x SATA ports. USB Headers: 2x6 USB 2.0 headers. 24-Pin ATX main power, 4-Pin CPU power. HP Support Community Pinout Table (Front Panel - F_PANEL) Power LED + Power Button Reset Switch (Optional) Reserved (NC) Power LED - Power Button return (GND) Reset return (GND) Keyed/Not present HP Support Community Common Upgrades and Compatibility

Supports DDR4 SODIMM (laptop-style memory) running at 2400MHz. Processor:

Supports 7th Generation Kabylake processors (TDP up to 91W). Case Swap:

Due to its micro-ATX form factor, it can fit in standard cases, but the non-standard 2x6 USB headers may require adapter cables. HP Support Community

Note: HP has limited documentation for this specific custom board, but the "Odense2-K" documentation on HP Support HP Community provides the best available information. Pegatron / Odense Motherboard - HP Support Community

The Pegatron IPM17-002 (Odense2-K) is a micro-ATX, LGA 1151 motherboard designed for HP Envy 750 and OMEN 870 systems, featuring the Intel H170 chipset and DDR4 support. It offers PCIe 3.0 slots, M.2 storage capabilities, and integrated video outputs. For technical specifications and front panel layouts, visit the HP Community Support. MOBO Manual for Omen Motherboard IPM17-002

Introduction

The IPM17-002 motherboard is a server-grade motherboard designed for high-performance computing applications. The manual provides detailed information on the motherboard's features, installation, configuration, and troubleshooting.

Key Features

Supports Intel Xeon E5-2600 v3/v4 series processors
Up to 16 DIMM slots, supporting up to 1TB of DDR4 RAM
Multiple PCIe slots, including x16, x8, and x4 configurations
Dual Intel I350-T4 network interfaces
Supports up to 8 SATA3 ports and 2 M.2 slots

Installation and Configuration

The manual provides step-by-step instructions for:

Unpacking and inspecting the motherboard
Installing the CPU and heat sink
Adding memory (DIMMs)
Installing expansion cards (PCIe)
Connecting storage devices (SATA, M.2)
Connecting network and peripherals

Configuration Options

The manual covers various configuration options, including:

BIOS settings: overview of the BIOS interface, navigation, and key features
UEFI firmware: overview of the UEFI firmware and its features
RAID configuration: setting up RAID levels (0, 1, 5, 10) using the onboard SATA controllers

Troubleshooting

The manual provides troubleshooting guides for common issues, such as:

Boot issues: no power, no boot, or boot loops
Memory issues: memory errors, incorrect memory configuration
Storage issues: storage device recognition, data corruption

Technical Specifications

The manual includes detailed technical specifications, such as:

Motherboard dimensions and layout
Supported processors, memory, and storage configurations
Power requirements and connector pinouts

Conclusion

The IPM17-002 motherboard manual provides comprehensive information on the motherboard's features, installation, configuration, and troubleshooting. The manual is designed to help system administrators, engineers, and technicians successfully deploy and maintain servers based on this motherboard. ipm17-002 motherboard manual

Recommendations

Carefully follow the manual's instructions for installation and configuration to ensure proper system operation.
Regularly check for BIOS and firmware updates to ensure the system is running with the latest features and security patches.
Use the troubleshooting guides to quickly identify and resolve common issues.

Revision History

Manual revision: [insert revision number]
Date: [insert date]

However, I can try to provide you with some general information about motherboards and their manuals. If you provide me with more context or details about your motherboard, I may be able to help you better.

That being said, here is a general outline of what a motherboard manual might cover:

Typical Contents of a Motherboard Manual

Introduction: A brief overview of the motherboard, its features, and its specifications.
Motherboard Layout: A detailed diagram of the motherboard, showing the location of various components, such as the CPU socket, memory slots, and expansion slots.
Components and Jumpers: A description of the various components on the motherboard, such as capacitors, resistors, and jumpers.
CPU Installation: Step-by-step instructions for installing a CPU on the motherboard.
Memory Installation: Instructions for installing memory (RAM) on the motherboard.
Expansion Cards: Information on installing expansion cards, such as graphics cards, sound cards, and network cards.
Storage Devices: Information on installing storage devices, such as hard drives, SSDs, and CD/DVD drives.
Connectors and Headers: A description of the various connectors and headers on the motherboard, such as USB ports, SATA ports, and fan headers.
BIOS Setup: Instructions for configuring the motherboard's BIOS settings.
Troubleshooting: A section on troubleshooting common issues with the motherboard.

Possible Specifications of IPM17-002 Motherboard

If I had to make an educated guess, here are some possible specifications of the IPM17-002 motherboard:

Form Factor: ATX or Micro-ATX
CPU Socket: LGA 1200 or AM4
Chipset: Intel B460 or AMD B450
Memory: 4-6 DDR4 RAM slots, supporting up to 64GB or 128GB of memory
Expansion Slots: 1-2 PCIe x16 slots, 1-2 PCIe x1 slots, and 1-2 PCI slots
Storage: 4-6 SATA ports, 1-2 M.2 slots

Keep in mind that these are just speculative specifications, and the actual specifications of the IPM17-002 motherboard may be different.

What to Do Next

If you're looking for the manual for your IPM17-002 motherboard, here are some steps you can take:

Check the manufacturer's website: Look up the website of the motherboard manufacturer (if you can find it) and search for the IPM17-002 motherboard model.
Contact the manufacturer: Reach out to the manufacturer's customer support and ask if they have a manual available for download or if they can provide you with a physical copy.
Search online: Try searching online for the manual, using keywords like "IPM17-002 motherboard manual" or "IPM17-002 manual".
Check online forums: Look for online forums or communities where users may have shared the manual or have knowledge about the motherboard.

The IPM17-002 motherboard (often referred to by the internal code Odense2-K or Thimphu-K) is an OEM board manufactured by Pegatron for use in HP Omen and Pavilion desktop PCs.

Because it is an OEM product, a standalone PDF manual for the motherboard itself is generally not published; instead, its configuration is detailed within the HP Desktop Motherboard Specifications and the technical reference guides for the specific computer models. Motherboard Specifications Socket Type: LGA 1151.

Processor Support: Up to 91W TDP; compatible with Intel 7th Generation (Kaby Lake) and 6th Generation (Skylake) processors, such as the Core i7-7700K and i5-7600K. Memory: Dual-channel architecture. Two 288-pin DDR4 DIMM sockets.

Supports up to PC4-23400 (DDR4-2933) and up to 32 GB total (16 GB per slot) on 64-bit systems. Expansion Slots: 1x PCI Express x16 (Gen 3.0) for graphics. 1x M.2 socket 1, key A for WLAN and Bluetooth. 1x M.2 socket 3, key M for SSD (SATA or PCIe). Front Panel Connector Pinout

The front panel header on the IPM17-002 follows a standard 9-pin layout (labeled F_PANEL) used for wiring into non-HP cases: Pin 1 HDD LED (+) 2 HDD LED (-) 3 Power LED (+) 4 Power LED (-) 5 Power Button 6 Power Button (GND) 7 Reset Switch 8 Reset Switch (GND) 9 Reserved (NC) 10 Missing (Key) Rear I/O Ports Display: 1x HDMI 1.4 output. USB: 2x USB 3.2 Gen 1 Type-A ports. Audio: 3x Audio ports (Line-in, Line-out, Mic). Networking: 1x RJ-45 Ethernet port. Common Jumper Settings

Clear CMOS: To clear the Real Time Clock (RTC) RAM, move the designated jumper cap from the default position to the clear position for 5–10 seconds while the PC is off and unplugged, then return it to default.

BIOS Password: A separate jumper is typically used to erase the power-on or setup password. MOBO Manual for Omen Motherboard IPM17-002

[2] [4] [6] [8] [x] Pin 1 – HDD LED + Pin 3 – Power LED + Pin 5 – Power Button. Pin 7 – Reset Switch (not always used by HP cases) HP Support Community HP Desktop PCs - Motherboard Specifications, Row

The Ultimate Guide to the IPM17-002 Motherboard Manual: Downloads, BIOS, and Troubleshooting

If you have landed on this page, you are likely searching for the elusive ipm17-002 motherboard manual. You are not alone. This specific motherboard is a proprietary board commonly found in pre-built desktop computers, particularly from HP and Compaq (often within the Pavilion and Slimline series). Because it was never sold at retail, finding official documentation can feel like a digital treasure hunt.

This article serves as your complete resource. We will not only point you to the manual but also provide critical specifications, BIOS setup guides, jumper settings, and common troubleshooting steps that are often buried in the original PDF.

How to Find and Use the IPM17-002 Motherboard Manual: A Complete Guide

If you are staring at a motherboard labeled IPM17-002, you are likely in the middle of a PC repair, a case swap, or a component upgrade. There’s just one problem: a quick Google search for this specific model number often yields confusing results.

The IPM17-002 is a classic example of an OEM (Original Equipment Manufacturer) board, most commonly found in pre-built systems like certain HP Pavilion or Compaq desktops. Because these boards are made specifically for system integrators rather than general consumers, finding a direct "IPM17-002 Manual" PDF can be tricky.

In this guide, we will cover where to find the manual, how to identify your specific board, and the critical specs you need to know to get your upgrade done.

How to Request a Replacement Manual from HP

If you require a physical printed manual for a restoration project, you can request one. However, HP no longer prints the IPM17-002 manual.

Go to: HP PartSurfer
Enter: The "SPS number" located on a white sticker on the motherboard (e.g., 5188-1921).
Result: HP will email you a high-resolution PDF of the original 48-page manual.

The Lost Link: Unearthing the Secrets of the IPM17-002 Motherboard Manual

In the world of pre-built desktop PCs, few things are as elusive as a good motherboard manual. While DIY builders are spoiled with glossy multilingual booklets, owners of OEM (Original Equipment Manufacturer) systems often find themselves staring at a cryptic model number etched onto a green board.

One such board is the IPM17-002.

If you’ve typed this string into a search engine, you’re likely one of three people: a budget PC recycler, an owner of an aging HP or Compaq all-in-one, or a technician trying to diagnose a no-POST situation. Let’s dive into why this specific manual matters, where to find it, and what secrets it holds.

3. Front Panel Connectors (The F_PANEL)

The most frustrating part of a case swap is wiring the power button. If you don't have the manual, the pins on the IPM17-002 can be confusing. While the layout varies, the standard pinout usually follows this logic:

Power Switch (PWR_SW): Often pins 6 and 8.
Reset Switch (RESET): Often pins 5 and 7.
Power LED (+/-): Pins 2 and 4.
Hard Drive LED (HDD_LED): Pins 1 and 3.

*Tip: Look for small white text printed on the motherboard

While HP often restricts access to full-service manuals for its motherboards, the (also commonly referred to as Go to product viewer dialog for this item. or Go to product viewer dialog for this item.

) is a common component found in desktops like the HP OMEN 870-224. Technical Specifications Processor Socket: LGA 1151. Chipset: Intel H170. Memory Slots: Dual DDR4 DIMM sockets. Expansion Slots: 1 x PCIe x16 (typically for graphics cards). 1 x M.2 Socket 1, key A for WiFi/Bluetooth. 1 x M.2 Socket 3, key M for NVMe SSDs. Storage: 3 to 4 SATA ports. Front Panel Header Pinout (F_PANEL)

The front panel header is a 9-pin connector usually located at the bottom-right edge of the board. Here is the standard layout: Pin 1 & 2: HDD LED (+/-). Pin 3 & 4: Power LED (+/-). Pin 5 & 6: Power Button (Pin 6 is Ground). Pin 7 & 8: Reset Switch (Optional, Ground). Pin 9: Reserved. Pin 10: Key (no pin present). Processor Compatibility , also commonly known as the motherboard, is

The board supports several 7th Generation Intel Core (Kabylake) processors up to a 65W TDP: Intel Core i7-7700 Go to product viewer dialog for this item. (3.6 GHz Quad-Core). Intel Core i5-7400 Go to product viewer dialog for this item. (3.0 GHz Quad-Core). Intel Core i3-7100 Go to product viewer dialog for this item. (3.9 GHz Dual-Core). BIOS Access and Setup MOBO Manual for Omen Motherboard IPM17-002

Comprehensive Technical Guide: IPM17-002 (Odense) Motherboard The , also known by the manufacturer name Pegatron Odense

, is a widely used micro-ATX (uATX) motherboard found in various HP and Compaq desktop systems, including the HP Envy and HP Pavilion 500 series. While HP does not typically release a formal standalone "manual" for its individual motherboards, this guide compiles essential technical specifications and pinout information gathered from authoritative support data and user documentation. Core Specifications

The motherboard is built on the Intel H110 chipset and utilizes the LGA 1151 socket, making it compatible with 6th Generation Intel "Skylake" processors. Form Factor: uATX (24 x 24 cm / 9.4 x 9.4 in).

Memory: Two 240-pin DIMM sockets supporting dual-channel DDR3L-1600 or DDR3L-1333 memory. It supports up to 16GB total (8GB per slot).

Processor Support: Supports CPUs with a Thermal Design Power (TDP) up to 65 W, including i7-6700, i5-6400, and i3-6100 series. Front Panel Header Pinout

For users moving this motherboard into a new case or troubleshooting power issues, the front panel header (F_PANEL) follows a specific layout. Note that the Reset Switch is often not used in original HP case configurations. 1 2 3 Power LED + 4 Power LED - 5 Power Button 6 Power Button Return (GND) 7 Reset Switch (Optional) 8 Reset Return (GND) 9 Reserved (NC) 10 Key (No Pin)

For a basic setup, you only need to connect the Power Button (Pins 5 and 6) and optionally the Power and HDD LEDs. BIOS and Maintenance

The BIOS (Basic Input Output System) manages hardware initialization. You can manage it through the following methods: Entering Setup: Press F10 repeatedly during startup.

Resetting to Defaults: Inside the BIOS menu, press F9 to load setup defaults, then F10 to save and exit.

Manual CMOS Clear: If the system fails to boot, remove the coin-shaped CR2032 battery for 5–10 minutes with the power disconnected to reset all hardware settings.

Updates: Official BIOS updates can be managed through the HP Support site or using the HP Image Assistant (HPIA). Expansion and I/O Slots

Graphics: Integrated graphics depend on the installed processor (e.g., Intel HD Graphics 530/510).

Storage: The board typically includes standard SATA connectors for HDDs/SSDs. Some variants (like the IPM17-TP) may include an M.2 SSD slot, but compatibility should be verified per specific SSID.

For further assistance with specific system configurations, you can search the HP Support Community using your PC's specific model number.

The (also known as the ) is an Intel-based micro-ATX motherboard manufactured by Pegatron and primarily used in HP and Compaq desktop computers (such as the HP Pavilion 510 series). 1. Board Specifications Form Factor: Micro-ATX (24.0 x 24.0 cm).

Socket: LGA 1151 (Supports 6th Generation Intel Core "Skylake" processors). Chipset: Intel H170. Memory: Two 288-pin DDR4 UDIMM sockets. Supports PC4-17000 (DDR4-2133). Maximum capacity: 16 GB (2 x 8 GB). Expansion Slots: One PCI Express x16 (Gen 3.0).

One M.2 socket 1, key A (typically for Wi-Fi/Bluetooth cards). 2. Internal Connectors & Storage SATA: Two SATA 3.0 ports (6 Gb/s) for HDDs or SSDs. Power: One 24-pin ATX main power connector. One 4-pin ATX 12V CPU power connector.

Cooling: One 4-pin CPU fan header and one 3-pin system fan header.

Front Panel: Standard headers for power button, reset, and LED indicators. 3. Rear I/O Ports

Video: 1 x HDMI and 1 x VGA (supports integrated Intel HD Graphics). USB: Two USB 2.0 ports and two USB 3.0 ports.

Networking: One RJ-45 Ethernet port (Realtek RTL8111G Gigabit).

Audio: Three 3.5mm jacks (Line-in, Line-out, Microphone) powered by the Realtek ALC3863-CG codec. 4. Jumpers & Configuration

The board features a Clear CMOS (CLR_CMOS) jumper. To reset BIOS settings: Turn off the PC and unplug the power cord.

Move the jumper cap from pins 1-2 (default) to pins 2-3 for 5–10 seconds. Return the cap to pins 1-2 and restart the system. 5. Common Compatible CPUs

The motherboard is optimized for 65W TDP processors. Common compatible chips include: Intel Core i7-6700 / i7-6700T Intel Core i5-6400 / i5-6400T Intel Core i3-6100 / i3-6100T

(also known as the ) is an OEM motherboard manufactured by Pegatron for HP OMEN 870 series desktop PCs HP Support Community

While HP does not provide a single, downloadable PDF user manual for this specific board, key technical details and connection layouts are documented in their support knowledge base and technical reference guides. HP Support Community Core Hardware Features MOBO Manual for Omen Motherboard IPM17-002

2. Why You Need the IPM17-002 Manual

Without the manual, you risk:

Burning out front-panel LEDs by connecting them to the wrong pins.
Installing incompatible RAM (e.g., low-density vs. high-density modules).
Using the wrong power supply — some OEM boards use a 6-pin or other non-ATX power connector.
Being unable to reset the BIOS because you can’t locate the clear-CMOS jumper.

The manual provides the pinout diagrams, BIOS settings explanations, and hardware compatibility lists that generic online guides can’t offer.

What is the IPM17-002?

First, a crucial reality check: The IPM17-002 is not a retail motherboard. You cannot buy it on Newegg or Amazon.

It is a proprietary board manufactured by Pegatron (a spin-off of ASUS) exclusively for HP (Hewlett-Packard). You will typically find this board inside: Support for Intel LGA 1155 processors : The

HP Pavilion All-in-One (AIO) PCs (e.g., 20/22-b000 series)
Compaq Presario All-in-One models
Select HP Slimline desktops from the 2015–2017 era

The “IPM” stands for Industrial PC Mainboard, a naming convention HP uses for its custom Pegatron orders.