Kenwood Kpg-99d Software Download ^new^ 【POPULAR – EDITION】

is the essential Windows-based programming software used to configure Kenwood TK-7160 mobile radios. The latest widely available version is

, which is compatible with operating systems ranging from Windows XP to Windows 11. Supported Radio Models

The KPG-99D software is specifically designed for the following radio series: VHF Mobiles : TK-7160, TK-7160H, TK-7160M, and TK-7162. UHF Mobiles : TK-8160, TK-8160H, TK-8160M, and TK-8162. European Models Kenwood Kpg-99d Software Download

: The KPG-99D(E) variant supports European versions like the TK-7160E and TK-8162E. How to Download

Kenwood does not typically provide KPG-99D as a direct free download on its main consumer site. Instead, users can obtain it through: Authorized Dealers : Sites like Radio Shop UK Radiotronics offer the software as a digital download after purchase. Specialized Suppliers : Retailers like Alberta Radio Supply RadioCables.com.au is the essential Windows-based programming software used to

provide digital access for an administration fee (usually around $20.00–$25.00). Second-hand Markets : Platforms like

often list physical CDs or digital delivery options that include a serial number for installation. Requirements for Programming Step 1: Connect Hardware

To successfully program your radio using KPG-99D, you will need: Programming Cable

(USB or Serial) cable is required to connect the radio's microphone jack to your computer. : If using a USB cable, ensure the correct Prolific or FTDI drivers are installed for your operating system. Serial Number

: Official versions require a valid serial key during the installation process.

Step 1: Connect Hardware

  1. Ensure the radio is powered OFF.
  2. Attach the KPG-22 cable to the radio’s side connector.
  3. Connect the other end to your PC (or USB adapter).
  4. Turn the radio ON. The display (if equipped) will light up.

Step 3: Driver Setup (USB Users)

If using a USB programming cable:

  1. Do not plug the cable in yet.
  2. Install the driver software for your USB-to-serial bridge.
  3. Plug the cable into the USB port.
  4. Open Windows Device Manager (Right-click Start > Device Manager).
  5. Expand Ports (COM & LPT) .
  6. Note the COM Port number (e.g., COM4).
  7. Critical: Right-click the port > Properties > Port Settings > Bits per second (9600 is standard, but match the radio's baud rate).

Where to get it

Key Features