Lambert Lx 24 Fi Manual English !full! Access
The Lambert LX 24 Fi is a wall-hung convectional gas boiler designed by the Turkish manufacturer Baymak. This dual-circuit unit provides both central heating and domestic hot water (DHW) with a 24 kW power output, making it suitable for heating areas up to approximately 168m2168 m squared Technical Specifications
The following technical details are critical for understanding the unit's capacity and installation requirements: Power Output: 24 kW (Maximum); 9.6 kW (Minimum). Combustion Chamber: Closed (Fi model).
Dimensions: 725 mm (Height) x 400 mm (Width) x 300 mm (Depth). Weight: 38 kg (Net). DHW Flow Rate: 10.7 l/min at a temperature increase of 30∘C30 raised to the composed with power cap C Maximum Pressure: 3 bar for central heating; 8 bar for DHW. Materials: Built with durable copper and brass components. Operation and Control Panel
The boiler features a manual control system with a user-friendly interface designed for straightforward operation.
Installation: It is a wall-mounted unit that requires a professional to ensure safety and adherence to manufacturer standards (ISO 9001 and ISO 10002).
Fuel Compatibility: The unit can operate on both Natural Gas and LPG.
Safety: Instructions emphasize not storing flammable materials near the equipment to avoid fire risks. Maintenance and Troubleshooting
Regular maintenance is essential for longevity. The manufacturer, Baymak, declines responsibility for issues arising from improper installation or maintenance.
Operating Pressure: Normal operating pressure typically sits between 1.5 and 1.8 bar when the system is hot; if it exceeds 2.5 bar, the pressure may be too high. Common Issues:
Low Water Pressure: Often resolved by refilling the system to the recommended 1.5 bar. Lambert Lx 24 Fi Manual English
Ignition Lockout: Can occur if there is a gas supply issue or flame failure.
For comprehensive technical guidance, you can view digital copies of the Lambert LX 24 Fi Installation and User Manual or the Kullanım (Turkish) manual on platforms like Scribd. Baxi Lambert LX 24 Fi | PDF - Scribd
The Baymak Lambert Lx 24 Fi is a wall-hung, dual-circuit convectional gas boiler designed for both central heating and domestic hot water (DHW). This 24 kW system features a closed combustion chamber and is known for its compact design, making it suitable for smaller living spaces. Essential Operating Guide
The control panel is manual and straightforward, allowing for quick adjustments to your home's comfort. Summer & Winter Modes:
Summer: Turn the mode selector to the sun icon; the boiler will only provide hot water.
Winter: Turn it to the snowflake icon to activate both radiators and hot water. Temperature Settings: Heating: Select a temperature between Hot Water: Select a temperature between
System Pressure: Keep an eye on the pressure gauge. It should typically stay around 1.5 bar. If it drops below 1.0 bar, you must use the filling loop to add water. Troubleshooting & Resetting
If your boiler displays an error code (such as the common E03 related to the air pressure switch), a manual reset may be necessary.
How to Reset: Turn the selector switch to the 'Reset' position and hold it for at least 2 seconds. The Lambert LX 24 Fi is a wall-hung
Check the Flame: If the boiler doesn't relight after a reset, check for gas supply issues or potential flue overheating. Safety & Maintenance HOW TO FIX BAYMAK LAMBERT LX 24 FI E03 ERROR?
Lambert Lx 24 Fi Manual
Table of Contents
- Safety Precautions
- Product Description
- Installation
- Operating Instructions
- Maintenance
- Troubleshooting
- Technical Specifications
- Warranty Information
1. Safety Precautions
- Read this manual carefully before using the Lambert Lx 24 Fi.
- Ensure that the device is installed and maintained by a qualified professional.
- Keep the device out of reach of children and pets.
- Avoid exposing the device to extreme temperatures, humidity, or physical stress.
2. Product Description
The Lambert Lx 24 Fi is a high-quality [insert product type, e.g., lighting fixture, heater, etc.]. It is designed to provide [insert benefit, e.g., efficient lighting, warmth, etc.] for [insert application, e.g., residential, commercial, etc.]. The device features [insert key features, e.g., energy efficiency, compact design, etc.].
3. Installation
- Before installation, ensure that the device is compatible with your electrical system.
- Follow the installation instructions carefully to avoid damage to the device or injury to yourself.
- Connect the device to a power source that meets the technical specifications.
4. Operating Instructions
- To operate the device, follow these steps:
- [Insert step 1, e.g., turn on the power switch]
- [Insert step 2, e.g., adjust the settings as needed]
- [Insert step 3, e.g., monitor the device's performance]
- Refer to the technical specifications for optimal operating conditions.
5. Maintenance
- Regularly inspect the device for signs of wear or damage.
- Clean the device according to the manufacturer's instructions.
- Replace any worn or damaged parts with genuine Lambert parts.
6. Troubleshooting
- If the device is not functioning properly, refer to the troubleshooting guide below:
- [Insert common issues and solutions]
7. Technical Specifications
- Power consumption: [insert power consumption]
- Operating temperature: [insert operating temperature]
- Dimensions: [insert dimensions]
- Weight: [insert weight]
8. Warranty Information
The Lambert Lx 24 Fi is covered by a [insert warranty period]-year limited warranty. For more information, please contact Lambert customer support.
Please let me know if you'd like me to add anything else.
Also, would you like to add or modify any section ?
Or you want me to generate text for specific section ?
Let me know !
4.3 Using Domestic Hot Water (Summer Mode)
- Turn the Mode selector to “Summer” (tap icon only).
- Set DHW temperature dial to a comfortable level (typically between 42°C and 50°C).
- Opening any hot water tap will automatically fire the boiler and modulate the burner.
6. Troubleshooting Common Error Codes
When an error occurs, the display shows ”E” followed by a number. Below are the most frequent codes, their meaning, and user-level solutions. 5. Operation & Listening
| Code | Meaning | User Action | |------|---------|--------------| | E01 | Ignition failure (no flame after 3 attempts) | Press Reset. Check gas supply (other appliances working?). If persists, call engineer. | | E02 | Flame loss during operation | Reset boiler. Check flue terminal for wind or blockage. | | E03 | Low system water pressure | Repressurise to 1.5 bar (see section 4.4). | | E05 | Overheating (flow temp > 95°C) | Check radiator valves are open. Bleed air from system. | | E10 | Fan or flue pressure switch fault | Cannot be user-reset. Contact engineer. | | E34 | External sensor fault (if installed) | Call engineer. Boiler will run on default curve until fixed. |
If the boiler displays a lockout symbol (red LED steady), pressing Reset once may clear it. If the code returns within 24 hours, professional assistance is required.
Maintenance & Inspection Tips
- Preflight fuel checks: Sump each tank for water/sediment.
- FI system: Regular EFI throttle body/port inspections; follow Lycoming service intervals.
- Composite care: Inspect for delamination, UV damage; repair per manual.
- Annual/100-hr: Engine inspection, magneto service, AD compliance, propeller overhaul schedule.