The blue logo of MacVector, inc.

Mastercam X7-2022 Virtual Usb Bus Error 39 !!exclusive!!

The Virtual USB Bus Error 39 in Mastercam (X7 through 2022) is typically caused by a Windows security feature called Core Isolation (Memory Integrity), which prevents unsigned or older virtual drivers from loading. Feature Fix: Disabling Memory Integrity

The most effective "feature" to resolve this error is to adjust your system's security settings to allow the virtual driver to function properly.

Open Windows Security: Click the Start menu, type Windows Security, and open it.

Navigate to Device Security: Select the Device security tab on the left-hand menu.

Access Core Isolation: Under the "Core isolation" section, click on Core isolation details.

Disable Memory Integrity: Switch the Memory integrity toggle to Off.

Restart Your PC: You must restart your computer for these changes to take effect and for the driver to load without the Code 39 error. Alternative: Registry Adjustment

If the toggle is grayed out or unavailable in the settings menu, you can disable it via the Registry Editor:

Navigate to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\DeviceGuard\Scenarios\HypervisorEnforcedCodeIntegrity Set the Enabled value to 0. Restart your computer.

Note: If the error persists after these steps, it may be due to a corrupt user profile; deleting and recreating the Windows user profile has been known to resolve deep-seated Mastercam launch issues. Mastercam X7-2022 Virtual Usb Bus Error 39 - Google Groups

Mastercam Virtual USB Bus Error 39 typically occurs in Windows 10 and 11 environments because of a conflict between the virtual hardware key (HASP/dongle) drivers and modern Windows security features. This error prevents Windows from loading the necessary driver for the hardware, effectively locking users out of the Mastercam software. The Core Cause: Memory Integrity

The most frequent cause of Error 39 is a Windows security feature called Core Isolation (specifically Memory Integrity

. This feature prevents unauthorized code from accessing high-security processes but often flags the virtual USB bus drivers used by legacy or specific software versions like Mastercam X7–2022 as incompatible or "corrupted" Effective Solutions

To resolve this error and restore Mastercam functionality, users can apply the following methods: How to Fix USB Driver Error Code 39 - Matsusada Precision

The Mastercam Virtual USB Bus Error 39 is a critical driver issue occurring on Windows 10 and 11, primarily caused by Core Isolation (Memory Integrity) security features blocking the Virtual USB Bus driver. This error prevents Mastercam from verifying its HASP/NetHASP security dongle, essentially locking the software out of its license. Core Causes Mastercam X7-2022 Virtual Usb Bus Error 39

The "Error Code 39" message ("Windows cannot load the device driver for this hardware. The driver may be corrupted or missing") typically stems from:

Security Conflicts: Windows' "Core Isolation" feature blocks older drivers that lack modern security signatures.

Registry Corruption: Corrupted UpperFilters or LowerFilters keys in the Windows Registry can prevent the USB bus from loading correctly.

Corrupt User Profiles: In some instances, crashing while multiple Mastercam sessions are open can corrupt a Windows user profile, leading to bus errors. Technical Troubleshooting Procedures 1. Disable Core Isolation (Recommended First Step) This is the most common fix for Windows 10/11 users. Open Windows Security (search via the Start menu). Navigate to Device Security > Core isolation details. Toggle Memory integrity to Off. Restart your computer. 2. Update HASP/Sentinel Drivers

Legacy drivers included with older Mastercam versions (like X7) are often incompatible with modern OS updates.

Download the latest Sentinel LDK Runtime or SafeNet HASP drivers directly from the Thales Customer Support Portal (formerly Gemalto/Aladdin).

Ensure any previous versions are fully uninstalled via Device Manager before installing new ones. 3. Clear Registry Filters

If the driver is not loading due to internal Windows "filters," manual registry editing may be required. Mastercam X7-2022 Virtual Usb Bus Error 39 - Google Groups

The "Virtual USB Bus Error 39" in Mastercam (X7 through 2022) typically indicates that

Windows cannot load the required device driver because it is either corrupted, missing, or blocked by security features

. This error is common when using virtual USB emulators or physical HASP keys on modern versions of Windows. Common Causes Core Isolation/Memory Integrity:

A Windows security feature that often blocks older or unsigned drivers, such as those used for virtual USB buses. Corrupted Registry Keys:

"UpperFilters" and "LowerFilters" entries in the registry can interfere with USB driver loading. Driver Signature Enforcement:

Windows may prevent the driver from loading if it lacks a valid digital signature. Recommended Solutions 1. Disable Core Isolation (Memory Integrity) The Virtual USB Bus Error 39 in Mastercam

This is the most frequent fix for Error 39 on Windows 10 and 11. Matsusada Precision Windows Settings and navigate to Update & Security (Windows 10) or Privacy & Security (Windows 11). Windows Security Device Security Core isolation details Memory integrity your computer. 2. Modify Registry Filters

If disabling Core Isolation doesn't work, clear potentially corrupted registry filters. Back up your registry before proceeding. The Driver May Be Corrupted or Missing. (Code 39 Solution)

Report: Mastercam X7-2022 Virtual USB Bus Error 39

Introduction

Mastercam X7-2022 is a popular computer-aided manufacturing (CAM) software used for machining and manufacturing processes. However, some users have reported encountering a Virtual USB Bus Error 39 when using the software. This report aims to provide an overview of the error, its possible causes, and potential solutions.

Error Description

The Virtual USB Bus Error 39 is a common error that occurs when the Mastercam X7-2022 software is unable to communicate with a virtual USB device. The error message typically appears as:

"Virtual USB Bus Error 39: The driver returned a failed result for a request to retrieve the device descriptor."

Possible Causes

After analyzing various user reports and forums, the following possible causes of the Virtual USB Bus Error 39 have been identified:

  1. Outdated or Corrupt Device Drivers: Outdated or corrupt device drivers, particularly the virtual USB bus driver, can cause this error.
  2. USB Port Issues: Issues with the USB port, such as a faulty or malfunctioning port, can prevent Mastercam X7-2022 from communicating with the virtual USB device.
  3. Software Conflict: Conflicts with other software or plugins installed on the system can cause the error.
  4. Registry Issues: Registry errors or corrupted registry entries can prevent Mastercam X7-2022 from functioning properly.

Solutions

To resolve the Virtual USB Bus Error 39, try the following solutions:

  1. Update Device Drivers:
    • Go to the Device Manager (Windows) and expand the "Universal Serial Bus controllers" section.
    • Right-click on the virtual USB bus device and select "Update driver".
    • Follow the prompts to search for and install any available updates.
  2. Disable and Re-enable the Virtual USB Bus:
    • Go to the Device Manager (Windows) and expand the "Universal Serial Bus controllers" section.
    • Right-click on the virtual USB bus device and select "Disable device".
    • Wait for 10 seconds and then enable the device again.
  3. Check USB Port:
    • Try using a different USB port on the system.
    • Ensure that the USB port is not damaged or malfunctioning.
  4. Uninstall and Reinstall Mastercam X7-2022:
    • Uninstall Mastercam X7-2022 and then reinstall it.
    • Ensure that all registry entries are removed during the uninstallation process.
  5. Run the Registry Repair Tool:
    • Run a registry repair tool, such as CCleaner, to scan and repair any registry errors.

Conclusion

The Virtual USB Bus Error 39 in Mastercam X7-2022 can be caused by various factors, including outdated device drivers, USB port issues, software conflicts, and registry errors. By trying the solutions outlined in this report, users should be able to resolve the error and continue using the software without issues. Outdated or Corrupt Device Drivers : Outdated or

Recommendations

Additional Information

If none of the solutions outlined in this report resolve the issue, it is recommended to:

Mastercam X7-2022 : Fixing the "Virtual USB Bus Error 39" If you are seeing Error Code 39 while attempting to run Mastercam X7 Mastercam 2022

, your Windows operating system is likely blocking the Virtual USB Bus driver. This error typically states that Windows cannot load the device driver because it may be corrupted or missing. In the context of Mastercam, this usually points to a conflict with modern Windows security features like Core Isolation. Top Solution: Disable Core Isolation (Memory Integrity)

The most common cause for Error 39 on Windows 10 and 11 is the Memory Integrity setting within Core Isolation. This feature can block older or virtual drivers—like the one Mastercam uses for its HASP/USB licensing—to prevent unauthorized access. To disable it: Open Windows Security via the Start menu. Navigate to Device Security on the left sidebar. Click on Core isolation details. Toggle the Memory integrity switch to Off. Restart your computer to apply the changes.

Alternative: Registry Fix for "UpperFilters" and "LowerFilters"

If disabling Memory Integrity doesn't work, corrupted registry values may be preventing the Virtual USB Bus from loading. Press Win + R, type regedit, and hit Enter.

Navigate to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\.

Locate the specific GUID for your USB device (look for one containing "Universal Serial Bus controllers"). On the right pane, look for UpperFilters and LowerFilters. Right-click and Delete these values. Restart your PC. Additional Troubleshooting Steps Mastercam USB HASP issue - eMastercam.com

Mastercam Virtual USB Bus Error 39 typically occurs when the Windows operating system cannot load the device driver for the hardware, often due to security features or corrupted registry entries. This error affects Mastercam versions from X7 through 2022, primarily on Windows 10 and 11, where advanced security settings may block older virtual drivers. Primary Causes Mastercam X7-2022 Virtual Usb Bus Error 39 - Google Groups

7. Conclusion of Review

Error 39 on Virtual USB Bus for Mastercam X7–2022 is:

Rating for crack reliability: ★☆☆☆☆ (1/5) – too fragile.
Rating for official solution: ★★★★★ (5/5) – works perfectly.

If you need help transitioning to a legitimate license, contact your local Mastercam reseller.

Step 5: Fresh Install

  1. Do not plug in the USB dongle yet.
  2. Run the downloaded Sentinel_LDK_Windows_Run-time_Setup.exe as Administrator.
  3. Choose "Complete" installation.
  4. Reboot.
  5. Now plug in the dongle. Wait for "Device driver successfully installed".
  6. Launch Mastercam.

Re-register the Bus Driver

  1. Open Command Prompt as Admin.
  2. Run these commands: 
    net stop mf
net stop aksusb
regsvr32 /u C:\Windows\System32\aksusb.dll
regsvr32 C:\Windows\System32\aksusb.dll
net start mf
net start aksusb
  3. Reboot.

3. Diagnostic Methodology

Before applying a fix, the system state must be verified.

  1. Physical Verification: Ensure the Mastercam SIM (security dongle) is physically connected. Check if the LED on the dongle is illuminated (solid or blinking). If the dongle is dark, the issue may be physical or USB-port related, not Error 39.
  2. Device Manager Analysis:
    • Open Device Manager (devmgmt.msc).
    • Navigate to Universal Serial Bus controllers.
    • Look for an entry with a yellow exclamation triangle. It may be named "SafeNet Sentinel HL Key" or simply "Unknown Device."
    • Right-click > Properties. Under the General tab, verify the message: "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)."