EN VIVO

Nako Na-613d Disable Alarm ((link))

To disable the alarm on your Nako NA-613D digital clock, use the following button combinations while in the "Normal" time-display mode:

Disable Alarm: Press and hold the S button, then press the D button. The alarm icon (often a small bell or wave symbol) should disappear from the screen.

Disable Hourly Chime: Press and hold the S button, then press the M button. This toggles the hourly "beep" function. Troubleshooting If the alarm is currently ringing:

Stop the Alarm: Press any button (except SNOOZE if your model has a dedicated one) to stop the sound completely for the day.

Snooze: If your unit has a stand or a top button labeled for snooze, pressing it will temporarily silence the alarm, but it will ring again in 5 minutes. Button Map for Nako NA-613D Standard Label Primary Function M Cycles through Time, Stopwatch, and Alarm settings. S Set/Select

Used to view the current alarm time or select digits during adjustment. D Date/Adjust

Used to view the date or increase numbers when setting time/alarm.

Na-613D Quartz Clock for Kitchen Timer Car Desk Carriage Clock

The Nako NA-613D (also sold under brands like Kenko) is a simple, budget-friendly digital quartz clock commonly used in vehicles or as a small desk clock. Disabling the alarm can be tricky because the buttons often lack clear labeling for this specific function. How to Disable the Alarm

To stop the daily alarm or the hourly chime from going off, follow these steps:

Enter Alarm Mode: Press the MODE button (usually the bottom-left button) until you see the alarm time displayed instead of the current time.

Toggle Alarm/Chime: Once in alarm mode, press the START/RESET button (usually the top-right button) to cycle through the alarm settings.

Identify the Icons: Watch the top of the LCD screen for small icons: Bell Icon: The daily alarm is active. Signal/Lines Icon: The hourly chime (beep) is active.

Disable All: Continue pressing the START/RESET button until no icons are visible at the top of the display.

Confirm: Press the MODE button again to return to the standard time display. Device Overview

Design: Features a monochrome LCD display and a removable stand with an adjustable tilt angle.

Common Issues: Users have reported mixed quality, with some units arriving non-functional or failing shortly after purchase. nako na-613d disable alarm

Alternative Identification: If your device doesn't say "Nako," look for "Kenko KK-613D," as they use the same internal hardware and operation methods.

If the buttons on your specific unit are labeled differently, try holding the START and RESET buttons simultaneously while in the main time screen; on many similar digital watches and clocks, this is a "hidden" shortcut to toggle the alarm on and off.

Title: How to Disable Alarm on Nako NA-613D

Hey everyone!

Are you tired of the annoying alarm on your Nako NA-613D? Do you want to know how to disable it? Look no further! In this post, I'll guide you through the simple steps to turn off the alarm on your Nako NA-613D.

Step-by-Step Instructions:

  1. Press and Hold the Mode Button: Locate the mode button on your Nako NA-613D and press and hold it for a few seconds.
  2. Select the Alarm Mode: Once you're in the settings mode, navigate to the alarm setting and select it.
  3. Turn Off the Alarm: Switch the alarm to the "OFF" position.
  4. Save Changes: Press the mode button again to save your changes.

That's it! Your alarm should now be disabled. If you're still having trouble, refer to your user manual or comment below and I'll do my best to help.

Share Your Experience: Have you had any issues with your Nako NA-613D alarm? Share your experiences and tips in the comments below!

Like and Share: If this post was helpful, be sure to like and share it with your friends and family who may be struggling with their Nako NA-613D alarm.

To disable the alarm and hourly chime on the Nako NA-613D digital clock, you generally use button combinations from the home (time) screen. The clock typically features three buttons labeled S (Split/Lap), D (Start), and M (Mode). Disabling the Daily Alarm

To toggle the daily alarm on or off, perform the following in normal time mode: Action: Press and hold S, then press D once.

Indicator: Look for a bell icon or "ALM" indicator on the display. When the alarm is disabled, this icon will disappear. Disabling the Hourly Chime

If your clock beeps at the top of every hour, you can disable this signal using a similar combination: Action: Press and hold S, then press M once.

Indicator: In many versions of this model, if the days of the week (MON, TUE, etc.) are all visible at once while holding S, the chime is on. If the day flags disappear, the chime is disabled. Quick Reference for Buttons Standard Function M (Mode)

Cycles through modes (Time → Stopwatch → Alarm Set → Time Set). S (Split/Lap) Shows alarm time; used with others to toggle functions. D (Start) Shows date; used to advance numbers during setup.

If the buttons on your specific unit are not labeled, the S button is usually the lower-left or top-right (Lap), D is often the top-right or lower-right (Start), and M is the bottom-left. To disable the alarm on your Nako NA-613D

Are you also looking for instructions on how to reset the time or use the stopwatch feature on this device?

I’m unable to generate a technical or investigative report on the specific phrase “nako na-613d disable alarm” because it does not correspond to any known standard product, system, software, or widely documented process.

Here’s why, and what you can do instead:

Factory Reset: Last Resort to Disable All Alarms

If you want to wipe all alarm settings back to default, send:

admin123 factory

This restores the Nako NA-613D to original settings—alarms will be reactivated to default thresholds. You can then reconfigure alarms OFF again.

Method 2: Disable Alarm Using the Tracking App

The Nako NA-613D is compatible with several GPS tracking platforms (e.g., GpsGate, Gurtam, or a custom white-label app). Here’s how to disable alarms through the official Nako app or common OBD/GPS apps:

  1. Log into the app (e.g., “GPS Car Tracker” or “Nako Tracker”).
  2. Select your NA-613D device from the device list.
  3. Navigate to Alarm Settings or Alert Configuration.
  4. You will see toggles for:
    • Geofence Alert
    • Vibration Alert
    • Over-speed Alert
    • Low Battery Alert
  5. Toggle each alarm OFF.
  6. Tap Save or Submit.

The app method is user-friendly but requires an active data connection. This disables push notifications but may not silence the internal buzzer (physical beep) on the device itself.

How to Disable the Alarm on Your NAKO NA-613D Timer: A Quick Guide

The NAKO NA-613D is a popular digital time switch used to automate appliances in homes and offices. While it is excellent for scheduling lights or fans to turn on and off, one common frustration users face is the audible alarm.

If your timer is beeping every time a setting changes, or if you simply want a silent operation, you likely struggled to find the specific button to stop it. The manual can be vague, and the buttons are not always intuitive.

Here is the step-by-step method to disable the alarm sound on the NAKO NA-613D.

What you need:

Alternative Method: Check the Wiring (If the device is "Buzzing")

If you have disabled the button-press sounds using the method above, but the device is still making a loud mechanical buzzing or humming noise, this may not be the alarm setting—it could be a wiring issue.

The NA-613D is designed to switch AC voltage. If you are switching a high-load appliance (like a geyser or large motor) or if the wiring is loose, the internal relay can vibrate.

  1. Turn off the main power.
  2. Check the terminal screws on the back. Ensure they are tightened securely against the copper wires.
  3. If the buzzing persists, you may be overloading the timer's maximum amperage rating. Consider using the timer to trigger a contactor rather than switching the load directly.

6. Troubleshoot persistent alarms

Final Note

If you only need to skip the alarm for one day (not permanently), look for a “AL OFF” or “SINGLE OFF” option — though on most Nako NA-613D units, cycling through the alarm modes until the bell icon vanishes is the correct method. When in doubt, remove both the AC power and backup batteries for 30 seconds to perform a hard reset.

Need the manual? Search “Nako NA-613D user manual PDF” for detailed diagrams.

The rain hammered against the corrugated roof of Mang Tino’s small electronics repair shop in Manila. Inside, the air smelled of solder, old dust, and ambition. Mang Tino, a wiry man with glasses thicker than bottle bottoms, was hunched over a device unlike any he had seen before. Press and Hold the Mode Button : Locate

It was a black box, no bigger than a deck of cards, with a single cryptic label: Nako NA-613D. A rich, paranoid businessman had brought it in. "This," the man had whispered, "is a silent alarm for my vault. But last week, it started screaming at 3 AM for no reason. Disable it. But don't trip the tamper circuit. If you do, it sends a signal to a satellite, and… well, you don't want that."

Mang Tino called his brilliant but impulsive niece, Nako. "Nako," he said, wiping his brow. "This NA-613D is a beast. One wrong move, and it shouts to the heavens."

Nako, all of nineteen with streaks of purple in her hair and a soldering iron as her wand, grinned. "Tito, relax. I've jailbroken phones that cried harder."

She opened the box. Inside was a labyrinth of micro-capacitors and a central chip with a tiny, blinking red eye. The alarm was active.

"Standard oscillator circuit," she murmured. "The disable should be a simple high-frequency pulse on pin four."

She touched her probe to pin four. The blinking red eye turned blue. Then a cold, robotic voice echoed from the box: "Tamper detected. Initiating 613D disable sequence. Alarm disabled."

The blue light went out. The box went silent.

Mang Tino froze. "Nako… what did you do?"

"The alarm is disabled," she said, confused. "That's what he wanted."

"No," Tino whispered, pointing a trembling finger at the label. "Read it again. Nako NA-613D Disable Alarm. It’s not a command. It’s a warning."

The name on the label wasn't a model number. It was her name. Nako. The device had been waiting for her specifically. And by trying to disable it, she had completed a circuit—not to stop an alarm, but to enable something else.

The shop lights flickered. Outside, the rain stopped instantly, as if someone had turned off a faucet. In the sudden silence, a low hum began, vibrating up through the concrete floor. Across the city, every digital clock flashed 613D. Streetlights exploded in sequence. Car alarms wailed in a dissonant chorus, then died.

Nako looked at her uncle, then at the dead black box. On its surface, new words appeared, etched by an unseen laser:

"You didn't disable the alarm. You disabled the silence. The world will now hear the frequency it was never meant to forget."

From the Manila Bay, a pillar of blue light shot into the clouds, and a sound like a billion angry bees filled the air—the true 613D signal, now free, now screaming, now unstoppable.

And Nako, holding a cold soldering iron, realized her name wasn't just on the box. It was on the disaster.