Nalco 77225 Safety Data Sheet -
The NALCO 77225 Safety Data Sheet (SDS) identifies this product as an alkaline boiler water treatment that is corrosive to metals and can cause severe skin burns and eye damage. Key Safety Information for NALCO 77225
Below are the critical safety and handling details derived from the SDS:
Hazard Classification: It is classified under GHS as corrosive to metals and harmful if swallowed. First Aid Measures:
Eye Contact: Rinse cautiously with water for several minutes; seek immediate medical attention.
Skin Contact: Take off all contaminated clothing immediately and rinse skin with plenty of water. nalco 77225 safety data sheet
Ingestion: Rinse mouth; do not induce vomiting unless directed by medical personnel. Handling & Storage:
PPE: Always wear protective gloves, safety goggles, and face protection when handling.
Compatibility: Compatible with stainless steel and polyethylene; not compatible with aluminum, copper, brass, or zinc. Temperature: Maximum storage temperature is 65°C (149°F). Product Overview
NALCO 77225 is an internal boiler treatment designed for scale control using a combination of phosphate and polymer technology. It is frequently used in boilers operating at pressures up to 40 barg. Official SDS Resources The NALCO 77225 Safety Data Sheet (SDS) identifies
You can access full versions of the documentation through the following sources:
Request from Manufacturer: Official Nalco Water safety data sheets are typically requested directly through the Ecolab SDS Request Form.
Digital Archives: A full copy of the GHS-compliant SDS is hosted on Scribd - Nalco 77225 SDS.
Product Bulletin: For technical specifications beyond safety data, refer to the Nalco 77225 Internal Boiler Treatment PDF. Nalco 77225 SDS (GHS) | PDF | Toxicity - Scribd Section 15 & 16: Regulatory Status & Revision
REPORT: ANALYSIS OF NALCO 77225 SAFETY DATA SHEET (SDS)
Date: October 26, 2023 Subject: Hazard Analysis and Safety Profile of Nalco 77225 Product Identity: Nalco 77225 (Chemical Family: Quaternary Ammonium Compounds)
Section 15 & 16: Regulatory Status & Revision Date
Handling:
- Use in well-ventilated areas or under local exhaust.
- Avoid generating mists or aerosols.
- Never add water to the chemical; always add chemical to water slowly.
- Use corrosion-resistant equipment (316 stainless steel, polypropylene, or PTFE).
Section 16: Other Information
This includes the date of preparation, last revision, and legends for abbreviations. Check the revision date – an SDS older than 3 years may be out of compliance. Nalco typically revises SDSs annually or after any formulation change.