Nitocote Nt402 Msds !free! ❲BEST ›❳

Feature: Understanding the Nitocote NT402 MSDS – Safety, Handling, and Compliance

Transport Information

• UN Number, Shipping Name, etc.: Information for transporting the product.

4.2 Skin Contact

• Symptoms: Redness, burning, dry skin (due to solvent defatting).
• Action: Remove contaminated clothing and shoes. Wash thoroughly with soap and water for 15 minutes. Do not use solvents or thinners to remove the product from skin (this increases absorption). Seek medical advice if irritation persists.

4.1 Inhalation (Most Common Hazard)

• Symptoms: Headache, dizziness, nausea, loss of coordination, unconsciousness.
• Action: Remove victim to fresh air immediately. Administer artificial respiration if breathing has stopped. Keep person warm and at rest. If unconscious, do not induce vomiting; place in recovery position. Get immediate medical attention.

Stability & reactivity

• Stable under recommended storage conditions.
• Avoid strong oxidizers, acids, bases, and excessive heat. Moisture may react with isocyanates (if present) releasing CO2 and causing pressure build-up in closed containers.

1. Introduction

Nitocote NT402 is a high-performance, two-part, water-based epoxy coating manufactured by Fosroc. It is designed for the protection and beautification of concrete and masonry surfaces (e.g., bund walls, secondary containment areas, concrete floors).

The MSDS (Material Safety Data Sheet) – now commonly referred to as SDS (Safety Data Sheet) under GHS – is the critical legal document that governs how this material is handled, stored, and used. This feature breaks down the key sections of the Nitocote NT402 MSDS. nitocote nt402 msds