Nitocote Pe135 Msds Free May 2026

Nitocote PE135 is a single-component, water-based protective coating based on hydrophobic polyester resin. According to the Fosroc Nitocote PE135 Technical Datasheet, the product is non-toxic, eco-friendly, and free from hazardous materials such as coal tar pitch and hydrocarbon solvents. Safety & Hazard Summary

Classification: Generally classified as non-hazardous and non-toxic for standard use.

Skin Contact: May cause an allergic skin reaction or irritation in sensitive individuals. Eye Contact: Can cause serious eye irritation.

Environment: Some safety sheets indicate it contains substances harmful to aquatic life with long-lasting effects. First Aid Measures

Inhalation: Remove the person to fresh air. Seek medical attention if symptoms persist.

Skin Contact: Wash immediately with soap and plenty of water. Do not use solvents.

Eye Contact: Flush immediately with plenty of clean water for at least 15 minutes and seek medical treatment.

Ingestion: Rinse mouth. Do not induce vomiting; seek medical help immediately. Handling & Storage

Protective Equipment: Wear gloves, safety goggles, and protective clothing during application. nitocote pe135 msds

Ventilation: Ensure adequate ventilation, especially when used in confined spaces.

Storage: Store in a cool, dry, well-ventilated area in original containers at temperatures below 25°C. Nitocote PE135 - Fosroc

Nitocote PE135 is an eco-friendly, single-component protective coating based on hydrophobic polyester resin

. Below is the summary of safety and technical data derived from the SDS and Technical Data Sheets Section 1: Product Identification Product Name Nitocote PE135 Manufacturer Fosroc International Limited Primary Use

: Waterproofing and chemical-resistant protective coating for concrete substrates. www.aquaproofpune.com Section 2: Hazard Identification Classification

: Generally considered non-toxic and free from hazardous materials like coal tar, pitch, or aromatic hydrocarbons.

: While non-hazardous in standard use, concentrated vapors should be avoided. Some individuals may be sensitive to resins, leading to potential skin irritation or allergic reactions. Section 4 & 6: First Aid & Accidental Release Skin Contact

: Remove contaminated clothing and wash skin with soap and water or resin-removing creams. Do not use solvents for cleaning skin. Eye Contact Section 16: Other information

: Flush immediately with plenty of water for at least 15 minutes and seek medical advice.

: Clean up with water while the material is still damp. If allowed to dry, mechanical removal (scouring) is required. Section 8: Exposure Controls & Personal Protection Ventilation : Ensure adequate ventilation in the work area.

: Wear chemical-resistant, impervious gloves (neoprene recommended). Eye Protection : Wear safety glasses or goggles. Skin Protection

: Wear appropriate protective clothing to prevent skin contact; barrier creams may also be used. Section 9: Physical & Chemical Properties Appearance : Grey-colored viscous liquid. Specific Gravity : 1.28 to 1.36. : 6.0 – 8.0. Solids Content : ~53.8% – 55% by weight. Drying Time : 35–40 minutes at 20°C. Petrolinetech Section 10: Stability & Reactivity : Stable under normal ambient temperatures. Incompatible Materials

: Avoid contact with strong acids, strong bases, and strong oxidizing agents.

: For the full, region-specific safety document, you can download it directly from the Fosroc Product Page by selecting your country. chemical resistance levels for a particular project? Nitocote PE135 Safety Data Sheet | PDF | Toxicity - Scribd

Important Notice Regarding MSDS vs. SDS

Before providing the document, it is crucial to understand that MSDS (Material Safety Data Sheet) is an obsolete format. It has been replaced globally by the SDS (Safety Data Sheet) under the GHS (Globally Harmonized System) standards. (Note: Exact formulation

Manufacturers like Fosroc (the manufacturer of Nitocote PE135) have transitioned to the 16-section SDS format. Because specific chemical formulations and hazard classifications can change, you should always obtain the latest version directly from Fosroc or your local supplier.

Below is a representative Safety Data Sheet compiled based on the typical chemical composition and hazard data for Nitocote PE135 (a solvent-based epoxy coating). This document is formatted for professional use.

Section 16: Other information

• Date of last revision: [Obtain from manufacturer]
• Disclaimer: This summary is for information only and not a substitute for the official SDS.

Firefighting measures

• Suitable extinguishers: Foam, dry chemical (ABC), CO2, water fog.
• Unsuitable extinguishers: Straight water jet (may spread burning product).
• Hazardous combustion products: Carbon oxides, nitrogen oxides, amines, other toxic fumes.
• Special precautions: Use self-contained breathing apparatus (SCBA) and full protective gear.

SECTION 7: HANDLING AND STORAGE

7.1 Precautions for Safe Handling

• Avoid contact with skin and eyes. Avoid inhalation of vapour/spray.
• Use explosion-proof electrical equipment. Ensure good ventilation.
• Do not eat, drink, or smoke in areas where the product is used.

7.2 Conditions for Safe Storage

• Store in a cool, well-ventilated area away from heat and direct sunlight.
• Keep container tightly closed and upright to prevent leakage.
• Store separately from strong oxidizing agents and strong acids/alkalis.

SAFETY DATA SHEET

Product Name: NITOCOTE PE135 Version: 2.0 (Representative) Date of Issue: Current Date Manufacturer: Fosroc International

Transport information (overview)

• If solvent-bearing and flammable: may be classed as Flammable Liquid (UN 1993 or similar) depending on flash point and viscosity; specific UN number, packing group and transport class must be taken from manufacturer SDS and applicable transport regulations (IMDG, IATA, ADR).

Part 2: Understanding the Nitocote PE135 MSDS (SDS) Structure

Under GHS regulations (adopted by OSHA in the US, REACH in Europe, and similar bodies worldwide), the MSDS for Nitocote PE135 must contain 16 sections. Below is a practical breakdown of what you will find in each section specific to this product.

Composition / ingredients (typical)

• Epoxy resin — may cause skin/eye irritation; possible sensitizer.
• Amine curing agents (e.g., aliphatic/aromatic amines) — corrosive, skin sensitizers, harmful by inhalation.
• Solvent(s) (if solvent-based) — e.g., xylene, ethylbenzene, cyclohexanone, or similar: flammable, CNS depressants, may cause dizziness/headache.
• Additives/fillers/pigments — inorganic pigments (e.g., titanium dioxide), extenders; may be inert but dusts can irritate.

(Note: Exact formulation, CAS numbers and concentrations must be obtained from the manufacturer SDS for regulatory or compliance use.)

Section 7: Handling and storage

• Handling: Use local exhaust ventilation. Avoid skin/eye contact. No smoking.
• Storage: Store at 5–30°C in sealed containers. Avoid moisture and heat.