Nokia 105 Ta 1304 Flash File Hot! Download (FRESH • 2024)
Flashing the Nokia 105 (TA-1304) is typically done to resolve software issues like boot loops (hanging on the logo), forgotten security codes, or general system errors. Essential Downloads To begin, you will need to gather the following resources: Flash File (Firmware): The official stock ROM for the TA-1304 model. Flash Tool: Common tools for Nokia feature phones include Infinity-Best (NK2) Miracle Tool , or specialized Nokia flashing software. USB Drivers:
Specific Nokia or SPD (Spreadtrum) USB drivers are required for your PC to communicate with the phone. Flashing Procedure Preparation : Ensure your phone battery is charged to at least to avoid power failure during the process. : Flashing will wipe all personal data
from the device; back up any important information beforehand. Install Drivers
: Run the USB driver installer on your PC (Windows 7 or higher recommended). Load Firmware Nokia 105 Ta 1304 Flash File Download
: Open your chosen flash tool and browse for the downloaded TA-1304 flash file. Connect Device Turn off the mobile phone. Click the "Download" or "Flash" button in the tool.
Connect the phone to the PC via a micro-USB cable. You may need to hold a "boot key" (often the center or call button) while connecting. Completion
: The tool will show a progress bar. Once finished, the device usually reboots automatically. You can then safely remove the USB cable. Troubleshooting Download SP Flash Tool for Nokia phones Flashing the Nokia 105 (TA-1304) is typically done
Step 6: Start Flashing
- In the NBB tool, click "Start."
- A progress bar will appear (this takes 2–5 minutes).
- Do not unplug or touch the phone.
Official vs. Unofficial Flash Files: What to Use?
- Official firmware (recommended): Provided by Nokia or HMD Global. Stable, safe, and signed.
- Modified/unofficial firmware: Often include bloatware, viruses, or broken features. Avoid unless you know exactly what you’re doing.
For the Nokia 105 TA-1304, most trusted firmware versions are labeled with build numbers like V1.280, V1.310, or region codes (e.g., LATAM, INDIA, EU).
Step 4: Connect Your Phone
- Power off the Nokia 105 TA-1304 completely.
- Remove the battery (if removable) and reinsert it.
- Hold the Volume Down button (or no button – depends on variant).
- Connect the phone to your PC via USB cable.
Is Flashing Legal and Safe?
Legal: Yes, for personal use. Distributing copyrighted firmware without permission is not. You are restoring software that originally came with your phone.
Safe: Yes, if you follow instructions. However, incorrect flashing can permanently brick your device. Proceed only if you are comfortable with technical procedures. In the NBB tool, click "Start
Step-by-Step Guide: How to Flash Nokia 105 TA-1304
We will use the Nokia Best USB Phone Manager (NBB) tool, which is free, reliable, and beginner-friendly.
Step 3: Configure SP Flash Tool
- Download Mode (default): Use for normal flashing.
- Firmware Upgrade: Use if switching between different firmware versions.
- Format All + Download: Avoid unless necessary – this erases IMEI and calibration data.
For most issues, select "Download Only".
Q2: Does flashing void the warranty?
A: Yes. Flashing unofficial firmware or unlocking the bootloader voids the manufacturer warranty. Use official service centers if under warranty.
Requirements Before Downloading and Flashing
Before you download anything, prepare the following:
- Windows PC (Windows 7/8/10/11, 64-bit).
- USB to Micro USB cable (data cable, not charging-only).
- SP Flash Tool v5.1916 or newer (for MediaTek chips).
- MTK USB VCOM Drivers (to allow PC to detect the phone).
- Nokia 105 TA-1304 Flash File (link provided below).