Nokia Rm1035 Mtk Usb Driver 64 Bit Gsm Forum Link

To install the Nokia 130 (RM-1035) MTK USB drivers on a 64-bit Windows system, you need specialized MediaTek (MTK) drivers to enable communication for flashing or data transfer. Drivers & Compatibility

The Nokia RM-1035 is a MediaTek-based device, requiring standard MTK USB VCOM Operating Systems: Compatible with Windows 7, 8, 10, and 11 (64-bit). Hardware ID: The device typically identifies as USB\VID_0421&PID_069A when connected in boot mode. Download Links & Resources

While official Nokia support for this model has transitioned, the GSM community maintains active repositories: GSM-Forum (Hosting):

You can find specific driver packages and flashing guides on the GSM-Forum Nokia section

. Search for "MTK Nokia USB Driver" to find the latest 64-bit installer often shared by members. Manual Selection:

If automated installers fail, you can find specific hardware-matched drivers on DriverIdentifier for Nokia 130 Video Guide:

For a visual walkthrough of the installation process on Windows 10/11, refer to this tutorial for Nokia MTK drivers Installation Steps Disable Driver Signature Enforcement:

On Windows 10/11 64-bit, you must often disable this feature via Recovery Settings > Advanced Startup to allow unsigned MTK drivers to install. Run Installer: Install.bat usually found in the driver package. Manual Update: If the phone isn't recognized, open Device Manager , right-click the "Unknown Device" (often listed under Other devices Update Driver , and point to the folder containing the Connection:

Connect the RM-1035 while powered off or while holding a boot key (usually the center or "up" navigation key) to trigger the MTK bootloader mode. Are you looking to flash firmware or just transfer files?

Instal Driver Nokia MTK, Mediatek [ nokia 105, 130, dll ] di Windows 10

How to Download and Install Nokia RM-1035 MTK USB Driver (64-bit)

Finding the right drivers for the Nokia 130 (RM-1035) can be a headache, especially when trying to flash or repair the device on a modern 64-bit Windows system. Because this phone uses a MediaTek (MTK) chipset, standard data transfer drivers often aren't enough for specialized tasks like using Infinity-Box BEST or other flashing tools.

Below is a guide to getting your device connected and recognized correctly. 1. Download the Necessary Drivers

For the RM-1035, you specifically need the MTK USB VCOM or Nokia MTK Flash drivers. You can often find community-verified links on mobile technician forums like GSM Forum. Commonly used packages include: nokia rm1035 mtk usb driver 64 bit gsm forum link

MTK All-in-One USB Driver: A universal package for 32 and 64-bit systems.

MediaTek USB VCOM Drivers: Essential for "Preloader" mode used in flashing.

Nokia 130 RM-1035 specific drivers: Available through repositories like DriverIdentifier. 2. Prepare Windows 10/11 (Disable Signature Enforcement)

Modern 64-bit Windows versions block unsigned drivers by default. Since many MTK drivers are older, you must temporarily disable this security feature to install them: Hold Shift and click Restart.

Navigate to Troubleshoot > Advanced Options > Startup Settings > Restart.

Press 7 or F7 to select "Disable driver signature enforcement." 3. Manual Installation Steps

The drivers often don't have an automatic installer and must be added via the Device Manager: Open Device Manager (right-click the Start button). Select any item, then click Action > Add legacy hardware.

Choose "Install the hardware that I manually select from a list" and click Next.

Select Ports (COM & LPT) or "Show All Devices" and click Have Disk.

Browse to your extracted driver folder and select the .inf file.

Note: Ensure you select the 64-bit version (often in a "Win7" or "x64" subfolder).

Select MediaTek Preloader USB VCOM Port and finish the installation. 4. Verification

Once installed, connect your Nokia 130 via a high-quality USB cable. If successful, the device should appear under Ports (COM & LPT) in the Device Manager without a yellow exclamation mark (though a "Code 10" error is sometimes normal until the flashing software actively opens the port). To install the Nokia 130 (RM-1035) MTK USB

Nokia MTK Drivers Windows 10 64Bit Installation Guide #nokia

The Nokia RM-1035 (marketed as the Nokia 130 Dual SIM) is a MediaTek-based feature phone that often requires specific VCOM USB drivers for tasks like flashing firmware or repairing software issues. To find the definitive 64-bit driver and community-tested guides, users typically rely on the GSM-Forum Nokia Section, where expert members share verified download links and installation workarounds for modern operating systems. Essential Driver Information

The RM-1035 relies on the MediaTek (MTK) chipset, meaning standard Nokia Suite drivers are often insufficient for deep-level service tasks. Driver Type: MTK VCOM (Virtual COM Port) USB Driver.

Architecture: 64-bit compatibility is required for Windows 10/11.

Hardware ID: Often identified as USB\VID_0421&PID_06FB in Device Manager. 🛠️ Step-by-Step Installation Guide

Installing these drivers on 64-bit systems like Windows 10/11 usually requires bypassing Microsoft's security protocols. 1. Disable Driver Signature Enforcement

Windows 64-bit systems block unsigned drivers by default. You must disable this check to install the MTK VCOM driver. Go to Settings > Update & Security > Recovery. Under Advanced Startup, click Restart Now.

Navigate to Troubleshoot > Advanced Options > Startup Settings > Restart.

Press 7 or F7 to select "Disable driver signature enforcement". 2. Manual Installation via Device Manager

Because the driver is often provided as an .inf file rather than an executable, manual selection is necessary. Open Device Manager on your PC.

Connect the Nokia RM-1035 (sometimes without the battery) to the USB port.

Quickly right-click the "Unknown Device" (it may only appear for a few seconds) and select Update Driver.

Choose Browse my computer for drivers > Let me pick from a list of available drivers. Introduction (1–2 lines) A lightweight 64-bit MTK USB

Select Ports (COM & LPT) and click Have Disk to point to your downloaded 64-bit MTK folder. 3. Verify Connection

A successful installation will show the device as MediaTek USB VCOM Port or Nokia USB Serial Port under the COM ports section. 🔗 Finding Verified Links on GSM-Forum

The GSM-Forum (GSMHosting) is the primary resource for these files. To find the current active mirrors:

Search for "RM-1035 MTK Driver 64 bit" within the Nokia or MTK sub-forums.

Look for threads by established members or those related to tools like Infinity-Box BEST, which frequently provides its own signed driver packages for these models. Specification Model Nokia 130 Dual SIM (RM-1035) Processor Connectivity Micro-USB 2.0 OS Support Windows 7, 8, 10, 11 (64-bit)

If you are having trouble with a specific error message in your flashing tool, let me know! I can help you troubleshoot:

The specific tool you are using (e.g., BEST, Miracle Box, or Nokia Care Suite). Whether the phone is detected at all by your PC.

If you're seeing a "Device Descriptor Request Failed" error.

Nokia MTK Drivers Windows 10 64Bit Installation Guide #nokia

Here’s a step-by-step guide for finding and installing the Nokia RM-1035 (Nokia X2 Dual SIM) MTK USB driver on a 64-bit Windows PC, including the typical source from GSM Forum links.

Introduction (1–2 lines)

A lightweight 64-bit MTK USB driver tailored for Nokia RM-1035 devices that enables reliable PC–phone communication for flashing, flashing tools, data transfer, and ADB-like operations. Includes a GSM Forum thread for downloads, troubleshooting, and community support.

Quick Flash Guide:

1. Open SP Flash Tool (Run as Admin).
2. Load the MT6737_Android_scatter.txt firmware file for RM1035.
3. Click Download (not “Format All + Download” unless you have a full backup).
4. Now power off your Nokia RM1035 and connect via USB.
5. The phone will enter Preloader mode for 1-2 seconds – the driver catches it.
6. A yellow progress bar appears – do not disconnect.

Pro Tip: If stuck at 0% or “BROM ERROR: S_SECURITY_SECURE_USB_DL_NOT_SUPPORTED”, you need an Auth Bypass tool. Search “MTK Bypass Utility GSM Forum” for RM1035.

Installation Steps (numbered)

1. Download the driver package from the GSM Forum thread (see link below).
2. Extract the ZIP to a local folder.
3. If Windows blocks unsigned drivers, disable driver signature enforcement (Settings → Recovery → Advanced startup → Troubleshoot → Startup Settings → Restart → Disable driver signature enforcement).
4. Run the installer as Administrator; follow prompts.
5. Reboot the PC after installation.
6. Connect the powered-off Nokia RM-1035 while holding the designated key (if required by your flashing tool) or follow the tool’s connect instructions.
7. Verify in Device Manager: device appears under “Ports (COM & LPT)” or “Universal Serial Bus controllers” as MT65xx Preloader or similar.

🚫 Avoid these dangerous sources:

• “Driver installer .exe” from unknown blogs (often malware).
• YouTube videos with links in the comments (frequently disabled or expired).
• “Auto driver updater” software – they never detect preloader mode.

Q3: Why does my PC only detect the phone for 2 seconds?

That is normal Preloader mode behavior. The driver’s job is to install during that window. To flash, you must click “Download” in SP Flash Tool before connecting the phone.

Part 4: Common Errors and Fixes on 64-Bit Systems

| Error | Cause | Solution | |-------|-------|----------| | “The hash for the file is not present” | Driver signature enforcement is ON | Reboot with signature enforcement disabled (Step 1) | | Device disappears after 2 seconds | Normal preloader timeout | Click “Download” in SP Flash Tool before connecting the phone | | Error 10: Device cannot start | Conflicting COM port | Use USBDeview to remove all ghost MTK drivers, reinstall | | Driver installs but no COM port | You used USB 3.0 | Switch to USB 2.0 port and a high-quality cable |