PLEASE WAIT

menu
logo-mini

Nokia Ta1010 Flash File And Tool Download Link |top| May 2026

To flash your Nokia 105 (2017) TA-1010, you will need specific firmware (flash file), a compatible tool, and the correct USB drivers. This process is typically used to fix software issues, remove lock codes, or resolve "contact service" errors . Required Downloads

Flash File (Firmware): You can find tested firmware files for the TA-1010 (MT6261 chip) on platforms like Romgoc.net . Flash Tool:

Infinity BEST (NK2): This is the most reliable tool for Nokia feature phones, often used for unlocking and flashing .

SP Flash Tool: Some versions of Nokia phones with MediaTek chipsets can be flashed using SP Flash Tool .

USB Drivers: Ensure you have the MTK USB Serial Port drivers installed on your Windows PC so the tool can communicate with the device . Flashing Procedure (Step-by-Step)

Prepare the Device: Ensure the battery is charged to at least 60% to avoid interruption .

Install Drivers: Install the Nokia/MTK USB drivers on your PC .

Launch the Tool: Open your chosen flash tool (e.g., Infinity BEST or SP Flash Tool) as an Administrator . Load Firmware:

In the tool, browse and select the flash file (often a .bin or scatter file) .

If using Infinity BEST, you may need to set the path to the DataPackage in settings . Connect the Phone: Power off the phone.

Hold the "boot key" (usually the middle or call button, though some models just require plugging in the USB while off). Connect it to the PC via USB cable .

Start Flashing: Click the "Download" or "Flash" button in the tool. The process will begin automatically once the device is detected .

Completion: Once the progress bar reaches 100%, the device will reboot. Disconnect it from the PC . Alternative: Hard Reset Codes

If you only need to reset the phone and don't want to flash it, try these codes first: Soft Reset: *#7780# (Default security code is 12345) . Hard Factory Reset: *#7370# (Erases all data) .

Warning: Flashing will completely wipe all personal data from the device memory. Always back up important information if possible . nokia ta1010 flash file and tool download link

Do you need help troubleshooting a specific error like "Dead Mode" or a connection issue during the flash process? How To Flash Nokia 105 TA-1010 By Infinity Best

यह वीडियो Infinity Best टूल का उपयोग करके Nokia 105 TA-1010 को फ्लैश करने का तरीका YouTube·NR Solution Download SP Flash Tool for Nokia phones

Nokia 105 (TA-1010) Go to product viewer dialog for this item. is a classic feature phone built on the

chipset. Flashing its firmware is often used to fix issues like boot loops, "Contact Service" errors, or to update the device software. Required Tools & Files To successfully flash your Nokia TA-1010 , you will need the following components: Flash File (Firmware): You can find tested firmware files on sites like Romgoc.net Flash Tool: Professional tools such as Infinity Best

are commonly used for this model. Alternatively, some guides suggest using the SP Flash Tool for certain Nokia MTK devices. USB Drivers: Ensure you have the MTK USB Serial Port drivers

installed to allow your PC to recognize the phone in BROM mode. Flashing Procedure Preparation:

Charge your battery to at least 60% and back up any essential data, as flashing will erase everything on the device. Driver Installation: Install the Nokia USB Drivers on your Windows PC. Loading the File:

Open your chosen flash tool (e.g., Infinity Best) and browse to select the firmware file you downloaded. Connecting the Phone:

Power off the device. Click the "Download" or "Flash" button in the tool, then connect the phone to your PC via USB cable. Completion:

The tool will show a progress bar. Once it finishes, the phone will typically reboot automatically. Alternative: Factory Reset How To Flash Nokia 105 TA-1010 By Infinity Best 13 Nov 2018 — How To Flash Nokia 105 TA-1010 By Infinity Best NR Solution Download SP Flash Tool for Nokia phones

Flashing the Nokia 105 (2017) TA-1010 Go to product viewer dialog for this item.

is a common way to resolve issues like a forgotten security code, boot loops, or software bugs. This device uses a MediaTek (MT6261) chipset, meaning you will need specific firmware and tools designed for feature phones. 1. Necessary Download Links

To begin, you will need the firmware (flash file), the flashing tool, and the appropriate USB drivers.

Firmware (Flash File): You can find various versions of the official stock ROM at FirmwareFile or Fidetec. Common versions include v11.00.11 and v12.00.11. Flashing Tool: To flash your Nokia 105 (2017) TA-1010 ,

Miracle Box/Miracle Tool: This is the most recommended tool for this specific model.

Infinity-Box BEST: Often used for advanced repair and unlocking.

USB Drivers: Ensure you have the MediaTek (MTK) USB drivers installed on your PC so the computer can communicate with the phone while it is powered off. 2. Pre-Flashing Checklist

Before starting, ensure you have taken the following precautions:

Backup Data: Flashing will completely wipe all personal data, including contacts and messages.

Battery Level: Charge the phone to at least 50-60% to prevent the device from shutting down during the process, which can "brick" the phone permanently. Correct Cable: Use a high-quality Micro-USB data cable. 3. Step-by-Step Flashing Guide Follow these steps to flash your Nokia TA-1010 using a tool like Miracle Box:

Extract Files: Download and extract the firmware zip package on your computer.

Open Tool: Launch your chosen flashing software (e.g., Miracle Box). Load Firmware: In the tool, navigate to the MTK tab. Select the Write option.

Choose the "Scatter" or "Flash" file from the folder you extracted in Step 1. Connect Device: Turn off your completely. Click the Start button in the flash tool.

Connect the phone to the PC via USB while it is still powered off. You may need to hold a "boot key" (often the center 'OK' button or the 'Call' button) while plugging it in.

Flashing Process: The tool should detect the device and begin writing the firmware. A progress bar will indicate the status.

Completion: Once the process is finished, a "Success" or "Pass" message will appear. Disconnect the USB cable and restart the phone. 4. Troubleshooting Common Issues Download SP Flash Tool for Nokia phones

Conclusion

Flashing the Nokia TA-1010 is straightforward once you have the correct SP Flash Tool and a verified MT6737M firmware package. Always prioritize safety: use trusted sources, scan for malware, and never flash a preloader from an unknown build. If your phone is under warranty or you are uncomfortable with the process, seek professional repair – but for the DIY enthusiast, this guide gives you the technical foundation to revive your Nokia TA-1010 successfully.

Remember: No legitimate flash file or tool for TA-1010 requires payment or a survey. Stay vigilant. Need further help

Need further help? Check XDA Developers’ Nokia 1 forums for community-supported firmware mirrors and advanced troubleshooting.

Nokia TA-1010 Flash File and Tool Download Link

Are you facing issues with your Nokia TA-1010, such as a bricked device, forgotten password, or software issues? Look no further! This page provides you with the download link for the Nokia TA-1010 flash file and tool.

What is a Flash File?

A flash file is a type of software that is used to restore or update the firmware of a mobile device. In this case, the Nokia TA-1010 flash file is used to repair or reflash the device's firmware, which can help resolve various issues.

Nokia TA-1010 Flash File Details:

Nokia TA-1010 Flash Tool Details:

Download Link:

How to Flash Nokia TA-1010:

  1. Download the Nokia TA-1010 flash file and SP Flash Tool from the links above.
  2. Extract the flash file and SP Flash Tool to a folder on your computer.
  3. Launch the SP Flash Tool executable file.
  4. Click on the "Scatter-Loading" button and select the scatter file from the extracted flash file folder.
  5. Connect your Nokia TA-1010 device to your computer using a USB cable.
  6. Click on the "Download" button to start the flashing process.
  7. Wait for the flashing process to complete. This may take several minutes.

Precautions:

How to verify files before use

Step 5: Completion

The first boot may take up to 10 minutes. Do not interrupt it.

Part 2: The Official Download Links (Nokia TA1010 Flash File)

We have verified the integrity of the following files. The firmware is divided into two variant types based on region. Ensure you download the correct one for your device.

🛠️ How to Flash Nokia TA1010 (Quick Steps)

What you need: Windows PC, USB cable, downloaded firmware, SP Flash Tool, and VCOM drivers installed.

  1. Install Drivers: Install the MediaTek VCOM drivers and restart your PC.
  2. Extract Files: Use 7-Zip or WinRAR to extract the flash file (it will contain a scatter.txt file) and the SP Flash Tool.
  3. Load Scatter: Open flash_tool.exe. Click "Scatter-loading" and select the scatter.txt file from your firmware folder.
  4. Select Option: Choose "Download Only" (safe) or "Format All + Download" (full reset – use carefully).
  5. Connect Phone: Turn off your Nokia TA1010 completely. Click the "Download" button in the tool.
  6. Insert USB: Now connect the USB cable to your phone (do not press power button). The PC should detect it and start the blue/yellow progress bar.
  7. Finish: Wait for a green "Download OK" message. Disconnect and power on your phone. The first boot will take 5–7 minutes.

🔍 Troubleshooting Common Errors

Step 4: Flash the Device

  1. Click “Download” (green arrow).
  2. Power off your Nokia TA-1010 completely.
  3. Connect the powered-off phone to the PC via USB.
  4. SP Flash Tool will detect the device and start the red/yellow progress bar.
  5. Wait for the green “Download OK” message.