Once upon a time, in the digital era of Windows 10, a small but mighty Nokia 105 (TA-1034) yearned to speak to a grand 64-bit PC. But between them lay a silent void—the missing Nokia USB driver.
The journey to bridge this gap usually follows a specific path:
The Seek for the Source: Finding the official bridge is the first step. You can often find the necessary Nokia Connectivity Cable Drivers or specialized MTK (MediaTek) Serial Port drivers that the TA-1034 requires to be recognized as a COM port.
The Ritual of Installation: On a Windows 10 64-bit system, the PC might be picky about unsigned drivers. Some users have found success by: Restarting the PC into Advanced Startup mode.
Selecting "Disable driver signature enforcement" (usually Option 7).
Manually pointing the Device Manager to the driver files for the "Unknown Device".
The Connection: Once the driver is installed, the phone appears in the Device Manager as a Nokia USB Serial Port or similar. This allows tools like Nokia Care Suite to finally "talk" to the device for flashing or maintenance.
In the end, with the right driver in place, the silent Nokia finally found its voice, and the user lived happily ever after—or at least until the next Windows update.
The Nokia 105 (TA-1034) is a classic feature phone that often requires specific USB drivers for tasks like data management or firmware flashing on modern operating systems. For users on Windows 10 64-bit, finding and installing these drivers can be a challenge due to the device's age and modern security requirements. Key Drivers for Nokia TA-1034
To establish a successful connection, you typically need one of the following driver packages:
Nokia USB Connectivity Drivers: The standard package for general communication between the phone and PC.
Nokia MTK (MediaTek) Drivers: Specifically required for flashing firmware or performing deep system repairs, as the TA-1034 utilizes a MediaTek chipset.
Nokia USB ROM Drivers: Often used for low-level serial communication during recovery processes. Installation on Windows 10 64-bit nokia ta1034 usb driver windows 10 64 bit
Modern versions of Windows 10 have strict driver signature enforcement, which can block older Nokia drivers that are not digitally signed for the current OS. To install them successfully, you may need to:
Disable Driver Signature Enforcement: This is done through the "Advanced Startup" menu (Shift + Restart > Troubleshoot > Advanced options > Startup Settings).
Manual Installation: Use the Device Manager to manually point Windows to the driver files. Right-click the "Unknown Device," select "Update Driver," and choose "Browse my computer for drivers". Recommended Download Sources
While official Nokia support for feature phones has transitioned, several reliable third-party repositories host these drivers: DriverScape: Offers legacy connectivity and ROM drivers.
TechMesto: Provides a collection of official Nokia USB driver installers extracted from service tools.
DriverIdentifier: Useful for matching specific hardware IDs (like USB\VID_0421&PID_069A) with compatible drivers.
Ensuring these drivers are correctly installed allows for the use of tools like Infinity-Best or OST LA for device maintenance.
Are you planning to use the driver for basic data transfer or for flashing/repairing the phone's firmware?
For the Nokia 105 (TA-1034) Go to product viewer dialog for this item.
, you typically need the Nokia MTK (MediaTek) USB Drivers to enable flashing or firmware updates on Windows 10 (64-bit). These drivers allow tools like Infinity BEST to recognize the phone when it is connected via a USB cable. Key Driver Resources
Official Connectivity Drivers: You can download general connectivity drivers for various Nokia models from DriverScape (Version 1.0.0.4). Specific TA-1034 Drivers: Direct downloads for the
variant are available through DriverIdentifier for Windows 10 64-bit. Once upon a time, in the digital era
Nokia USB Serial Port: For COM port functionality, DriverScape provides Version 7.1.32.115, which supports 64-bit Windows 10. Installation for Flashing (Windows 10 64-bit)
Installing MTK drivers on Windows 10 64-bit often requires disabling Driver Signature Enforcement because these drivers are sometimes not digitally signed for newer Windows versions:
Disable Signature Enforcement: Hold Shift while clicking Restart. Go to Troubleshoot > Advanced options > Startup Settings > Restart. Press 7 (or F7) to disable driver signature enforcement. Manual Installation: Open Device Manager. Connect your powered-off Nokia phone.
Right-click the "Unknown Device" (it may appear as "MT6261" or " ") and select Update Driver.
Choose Browse my computer > Let me pick from a list > Show All Devices > Have Disk and select the .inf file from your downloaded driver folder.
Confirm Warnings: Click "Install this driver software anyway" if Windows shows a security warning.
Are you trying to flash the firmware or just transfer contacts/data?
The Nokia Go to product viewer dialog for this item. refers to the Nokia 105 (2017) Go to product viewer dialog for this item.
Dual SIM feature phone. Because this device uses a MediaTek MT6261D chipset, the standard USB driver for Windows 10 (64-bit) is typically the Nokia Connectivity Cable Driver or a specialized MTK USB Driver if you are performing advanced tasks like flashing firmware. ⚡ Direct Download & Installation
For general connectivity (syncing or using the device as a modem), use the official connectivity drivers:
Primary Driver: Nokia Connectivity Cable Driver (v7.1.182.0) — Compatible with Windows 10 32/64-bit.
Alternative Source: Nokia USB Connectivity (v1.0.0.4) — Older but often more stable for legacy 2G devices. Q4: Do I need to root my Nokia TA1034 to install the driver
💡 Key Tip: If your PC does not recognize the phone after installation, you may need to disable Driver Signature Enforcement in Windows 10, as many older Nokia drivers are not digitally signed for modern 64-bit systems. 🛠️ How to Install on Windows 10 (64-bit) Download the driver file from the links above. Disconnect your phone from the computer before starting. Run the installer as an Administrator. Restart your PC once the installation finishes. Connect your Go to product viewer dialog for this item. via a high-quality micro-USB cable. If the driver doesn't work automatically: Open Device Manager (Right-click Start > Device Manager). Locate the "Unknown Device" or " Nokia TA-1034 " under Other Devices.
Right-click and select Update Driver > Browse my computer for drivers.
Select the folder where you extracted the driver files and click Next. ⚠️ Important Compatibility Note Nokia Connectivity Cable Driver - Download
App specs * License. Free. * Version. 7.1.182.0. * Latest update. July 15, 2022. * Platform. Windows. * OS. Windows 8. * Language.
Nokia Connectivity Cable Driver - Informer Technologies, Inc.
No. USB drivers work on locked and unlocked phones alike. Root is not required.
Installing the driver correctly requires circumventing Windows 10’s stringent driver signature enforcement in some cases. The most reliable method is as follows:
.zip file). Extract it to a permanent folder (e.g., C:\Android\usb_driver).android_winusb.inf file.Yes. Windows 11 has identical driver signing rules. Disable driver signature enforcement using the same Shift+Restart method.
| Mode | Purpose | Driver Type | |------|---------|--------------| | Preloader / BootROM | Flashing firmware, unbricking | MediaTek USB VCOM (Virtual COM Port) driver | | Normal / MTP | File transfer, charging | MTP / CDC Serial driver |
Even with the correct file, Windows 10 64-bit can be obstinate. The most frequent error is "The hash for the file is not present in the specified catalog file," which is a driver signature enforcement issue. To resolve this, the user must restart Windows 10, disable "Driver Signature Enforcement" via the advanced startup options (Shift + Restart), and then install the driver. Additionally, a faulty USB cable—especially one designed only for charging—is a common hardware culprit that no driver can fix.
This article explains how to find, install, and troubleshoot USB drivers for the Nokia TA‑1034 (a.k.a. Nokia 3.1 / similar TA-1xxx models) on Windows 10 64‑bit so you can transfer files, use ADB/fastboot, or restore/flash firmware.