Claire K Creations

menu icon
subscribe
search icon
×

Nosware — Epson L4150 Resetter Full [upd]

Nosware Epson L4150 Resetter — Full Guide

Warning: Using third‑party reset tools can void warranties, may violate local laws, and could harm your printer if misused. Proceed at your own risk.

Step 6 – Perform the Reset

  1. Click “Reset” or “Reset Waste Ink Counter”.
  2. A confirmation dialog will appear – click “OK”.
  3. The printer will make noise for 5–10 seconds. Do not turn off the power.
  4. You will see a message: “Reset successful”.

Step 7 – Power Cycle the Printer

Turn off the printer, wait 30 seconds, and turn it back on. The error light should be gone, and the printer should function normally.

4. Safe Alternative for L4150 Waste Ink Reset

If you genuinely need to reset the waste ink counter without service center intervention, the only safe methods are: nosware epson l4150 resetter full

What “resetter” means

A resetter (also called a service tool) restores Epson printers to factory service-state by resetting internal counters—commonly the waste ink counter—and clearing error states so the printer will accept ink again.

Final Verdict: Should You Use Nosware Epson L4150 Resetter Full?

Absolutely. If you own an Epson L4150 and have been hit by the waste ink pad error, the Nosware Epson L4150 Resetter Full is your best free solution. It saves you money, extends the life of your printer, and gives you complete control over your hardware. Nosware Epson L4150 Resetter — Full Guide Warning:

Just remember to download it safely, follow the instructions carefully, and plan to maintain your waste ink pads after 2–3 resets.

Is the Nosware Epson L4150 Resetter Full Safe for Your Printer?

Short answer: Yes, when used correctly.

The resetter does not modify the printer’s permanent firmware – it only sends a specific maintenance command (similar to what an Epson service center uses). However, you must understand:

  • Resetting the counter does NOT clean or replace the waste ink pads. If the pads are truly saturated, ink may leak inside the printer.
  • Reset only when the error appears. Do not reset prematurely, as this reduces the lifespan of the pads.
  • After 2–3 resets, you should physically clean or replace the waste ink pad kit (available on eBay/Amazon for $10–20).

Step 6: Finish

  1. The software will ask you to turn off the printer. Turn the printer off using the power button.
  2. Wait 10 seconds.
  3. Turn the printer back on.
  4. Check the ink levels by printing a nozzle check pattern. Your printer should now be error-free!

Step 5: Resetting the Ink Pad Counter

  1. Under the "Maintenance" section, look for "Waste ink pad counter" and select it.
  2. Click OK.
  3. You will see check boxes for "Main Pad Counter" and "Platen Pad Counter."
  4. Check both boxes.
  5. Click the "Check" button first to see the current status (it will likely show 100% full).
  6. Finally, click the "Initialization" button.
  7. A confirmation message will appear. Click OK.