Mismatch in Config SettingsEach config has an "Allowed Wordlist Types" setting. If your wordlist is categorized as Credentials but the config only allows MailPass, the runner will block the job.
Fix: Go to the Config Manager, edit the config, navigate to Other Options (or Data tab in OB2), and ensure the wordlist type you are using is moved to the Allowed side.
Environment.ini MisconfigurationThe Environment.ini file defines the rules (regex) for what constitutes a valid wordlist type. If your wordlist doesn't match the regex defined for its type, OpenBullet may fail to process it.
Fix: Check your Environment.ini (located in the UserData folder). Ensure the regex for types like Credentials or UserPass matches your data (e.g., ^.:.$ for a standard colon separator).
Incorrect Data Selection in the RunnerWhen starting a new job, the Runner requires you to select both a config and a wordlist. If the wordlist was imported with the wrong type assigned to it, the conflict triggers this error.
Fix: Re-import your wordlist and explicitly select the type that matches your config's requirements (e.g., Credentials, URLs, or Emails).
Version Incompatibility (OB1 vs. OB2)Configs for OpenBullet 1 (.loli) and OpenBullet 2 (.opk) handle data types differently. While OB2 can often import older configs, manual adjustments to the data settings are frequently needed after the import. Quick Checklist for Fixing Open Config Manager: Check the Data or Other Options tab.
Verify Allowed Types: Ensure your specific wordlist type is in the "Allowed" list.
Save & Rescan: Always save the config and click "Rescan" in the Runner after making changes to ensure they take effect.
Are you using OpenBullet 1 or OpenBullet 2, and what is the specific Wordlist Type you are trying to run?
The error message "This config does not support the provided wordlist type" occurs because the data format of your wordlist (e.g., user:pass) doesn't match the format allowed in your OpenBullet config settings. Quick Fix Steps
Open the Config Manager: Go to the Configs tab and select the specific config you are trying to use.
Navigate to Settings: Click on Stacker (the config editor) and find the Settings or Other Options tab. Update Allowed Types: Locate the Wordlist Type or Data section. Find the list of "Allowed Wordlist Types".
Ensure the type that matches your wordlist (usually Credentials for user:pass) is moved to the Allowed side or checked.
Save and Reload: Click Save in the config editor and retry your job. Advanced Troubleshooting
If the correct type is already allowed but it still fails, check your environment settings:
Verify Environment.ini: Ensure your Environment.ini file (found in the UserData or root folder) actually defines the wordlist type you are trying to use.
Regex Match: OpenBullet uses a Regex pattern in Environment.ini to validate your data. If your wordlist line doesn't match that pattern (e.g., using a semicolon ; instead of a colon :), it will reject the file.
Matching Slices: Ensure the "Slices" defined in the environment match the variables used in your config (e.g., USER and PASS).
Did you download this config from a forum, or are you creating it yourself from scratch?
The screen flickered once—then held steady.
OpenBullet. The name alone carried weight in certain circles—those corners of the internet where data was currency and anonymity was armor. For Leo, it was just another Tuesday night. A cracked energy drink next to his keyboard, the hum of his desktop fans like white noise, and a fresh list of combos he’d scraped from a half-accessible forum dump.
He dragged the .txt file into the loader. Two hundred thousand lines. Email:password. Most of them garbage, but that was the game—you sifted through the sand until your fingers caught on something sharp. Openbullet This Config Does Not Support The Provided
Leo hit Start.
The bots whirred to life in the log window—green text crawling upward like vines on a trellis. Validating... Retrying... Captcha detected... Skipping. The usual rhythm. He leaned back, waiting for those rare, beautiful words: Hit.
But after thirty seconds, a different message appeared.
OpenBullet: This config does not support the provided input type.
He blinked. Read it again.
“What the hell?”
He’d used this config a hundred times. A custom LoliShift config for a mid-tier retail site—nothing fancy, but reliable. He checked the settings. Input type: Combo (email:pass). His file was exactly that. No weird delimiters. No empty lines. UTF-8 encoding.
He tried a smaller test list—ten combos he’d manually verified earlier that week.
Same error.
“Config’s broken,” he muttered, already reaching for his backup folder.
But the backup did the same thing. Then the third one. Every config he tried—old staples, fresh downloads, even a legacy Puppeteer config he’d written himself—threw the same red flag.
Does not support the provided input type.
Leo sat forward, the caffeine suddenly not strong enough. He opened the config file in a text editor.
It looked fine. XML structure intact. The input options clearly listed "email:pass" as accepted.
He closed the editor. Opened the OpenBullet console directly—bypassed the GUI. Same error.
That’s when he noticed something strange.
His system clock read 03:14 AM. He didn’t remember it being that late. Or that early. He’d started at 11:00 PM. Four hours? No—he’d only been running scans for twenty minutes.
He glanced at his phone.
03:14 AM.
He refreshed the browser tab he’d left open—the forum where he’d scraped the combos. The page loaded, but the date on the posts had changed. Last week’s threads now showed timestamps from next month.
Leo’s hands hovered over the keyboard. He wasn’t a superstitious person. If you made a living sneaking through other people’s broken security, you learned to trust only logic, logs, and layers.
But logic had nothing to say about the config error. Mismatch in Config Settings Each config has an
He opened a command prompt and pinged the retail site’s login endpoint—the one his config had hammered ten thousand times before without issue.
Request timeout.
He tried a different site. Same timeout.
Every target his configs had ever touched was now unreachable.
Not blocked. Not rate-limited. Just... gone. Like the door had never existed.
His machine’s fans kicked up. The log window on OpenBullet, still frozen on the error message, suddenly scrolled.
Attempting fallback... Fallback failed. This config does not support the provided reality frame.
Leo stared at those last two words.
Reality frame.
That wasn’t in any config he’d ever seen.
His mouse cursor moved on its own—just a pixel, just once. Then stopped.
The energy drink can was empty. He didn’t remember finishing it.
Leo shut the laptop lid.
The error message burned behind his eyes. And somewhere, in the quiet between 03:14 and whenever morning decided to arrive, he realized the truth.
The config hadn’t stopped working.
He—the input he provided—was what no longer fit.
The combos hadn’t changed. The targets hadn’t moved.
The error wasn’t a bug.
It was a door closing. And Leo wasn’t sure which side he’d been left on.
OpenBullet: The Config Conundrum - Understanding and Resolving the "This Config Does Not Support The Provided" Error
OpenBullet, a popular open-source tool, has gained significant traction among cybersecurity professionals and enthusiasts alike for its versatility in managing and stress-testing web applications. However, users often encounter a frustrating error message: "This config does not support the provided." In this article, we'll delve into the world of OpenBullet configurations, explore the possible causes of this error, and provide actionable steps to resolve it.
Understanding OpenBullet Configurations
Before we dive into the error, let's briefly discuss OpenBullet configurations. A configuration, or "config" for short, is a set of predefined settings that determine how OpenBullet interacts with a target web application. These settings include parameters such as request headers, cookies, and payloads. Configurations are essential in OpenBullet, as they enable users to tailor their testing approach to specific applications and use cases.
The "This Config Does Not Support The Provided" Error
The "This config does not support the provided" error typically occurs when OpenBullet is unable to reconcile the configuration file with the provided data. This error can manifest in various scenarios:
Troubleshooting Steps
To resolve the "This config does not support the provided" error, follow these step-by-step troubleshooting guidelines:
Best Practices for OpenBullet Configurations
To minimize the likelihood of encountering the "This config does not support the provided" error, follow these best practices:
By understanding the causes of the "This config does not support the provided" error and following the troubleshooting steps outlined in this article, you'll be better equipped to resolve issues and optimize your OpenBullet experience. Additionally, adhering to best practices for OpenBullet configurations will help you get the most out of this powerful tool while minimizing errors and downtime.
Even if both the config and wordlist use a combo format, they might disagree on the separator (delimiter). The default delimiter in OpenBullet is a colon (:). However, some configs are hardcoded to expect a pipe (|), a semicolon (;), a tab (\t), or a space ( ).
The Error in Action: Your wordlist looks like this:
[email@example.com,password123]
But the config expects:
[email@example.com:password123]
Because the config's parser sees a comma instead of a colon, it cannot split the line into two variables. You will see: "This config does not support the provided key" or a similar generic refusal.
The Fix:
:)."Openbullet this config does not support the provided combo type 'Auto' when I'm using User:Pass"
Solution: You selected "Auto" in the Runner settings, but your combolist is standard User:Pass. Change the Runner’s Data Type dropdown to User:Pass. Do not use Auto unless the config explicitly requires it.
"Error appears only for some lines, not all"
Solution: Your combolist is inconsistent. Some lines have username:pass, others have username:pass:extra. Use a text editor to find the lines with multiple colons and remove or fix them.
"I am using a config that worked yesterday, but now it gives this error"
Solution: You likely changed something in the Environment settings. Check if you accidentally switched the "Bot Token" or "Proxy" settings to something that interferes with the input parser. Also, ensure your combolist wasn’t corrupted by a failed save.
If you spend time working with OpenBullet (OB) or OpenBullet 2, you know the feeling: you’ve found a promising config, loaded your wordlist, set your proxies, and hit "Start." But instead of the satisfying "HIT" notifications, you are immediately greeted by a wall of red text in the logger:
"This config does not support the provided input format."
It is one of the most common errors for beginners and intermediate users alike. It usually stops your run dead in the tracks before it even begins. OpenBullet: This config does not support the provided
In this post, we are going to break down exactly what this error means, why it happens, and how to fix it so you can get your checks running smoothly.
Before running a config, always check the Config Info tab within OpenBullet.
MailPass, UserPass, or Custom).