Sinamics Starter V5.4 Site

Overall Rating: ⭐⭐⭐⭐ (4/5)

Best for: Maintenance engineers, service technicians, and OEMs working with legacy SINAMICS drives (G120, S120, G120C, G110M, etc.) who don't use TIA Portal.

---

9. Saving & Archiving

• Save project: Project → Save → stores parameters offline.
• Upload from drive: Right-click drive → Upload device to PG.
• Download to drive: Download to target device.
• Export to file: Drive → Export → Drive parameters to Excel.

3. Download & Installation

3. Set the Address

• For Ethernet: Enter the drive's IP address (default is often 169.254.x.x or 192.168.1.x).
• For PROFIBUS: Set the slave address (matching the DIP switch on the CU).

8. Common Parameters (Examples)

| Parameter | Description | |-----------|-------------| | p0003 | User access level (1=Standard, 3=Expert) | | p0004 | Parameter filter (drive object type) | | p0300 | Motor type selection | | p0304 | Rated motor voltage | | p0305 | Rated motor current | | p1300 | Open-loop/closed-loop control (0=V/f, 20=SLVC, 21=VC) | | p0970 | Factory reset drive | | p3900 | End of quick commissioning | | p0700 | Command source selection (1=Terminals, 2=Fieldbus) | | p1000 | Speed setpoint source | sinamics starter v5.4

---

Key Capabilities:

• Offline configuration: Build drive projects without being connected to hardware.
• Online diagnostics: Real-time monitoring of actual values, alarms, and faults.
• Trace functions: High-resolution signal recording for advanced troubleshooting.
• Automatic configuration: Automated bus scanning (PROFIBUS DP, PROFINET) to identify existing drives.
• Expert list: Direct access to every parameter (e.g., Pxxxx, rxxxx).