Pc Nvr Setup — Smart Pss

feature in SmartPSS allows you to turn your Windows PC or Mac into a recording server, enabling your computer to record video directly from IP cameras or NVRs to its local hard drive. Prerequisites SmartPSS Installed : Ensure you have installed SmartPSS SmartPSS Lite on your computer. Component Selection : During installation, you must have checked the "Storage Service" box to enable this functionality. 1. Enable PC-NVR and click the icon from the home menu. Power icon

(or toggle switch) at the top right to turn the PC-NVR service Confirm the status displays as 2. Disk Management (Storage Allocation) Disk Management HDD Manager ) from the left-hand column. Select the local hard drive you want to use for recordings.

and enter the amount of space (in GB) you wish to reserve for video storage.

. The PC-NVR service will briefly restart to finalize the disk setup. 3. Channel Management (Adding Cameras) Channel Management on the left menu. sign or search for devices on your network. smart pss pc nvr setup

Select the specific cameras or NVR channels you want to record and click button to add them. Check the box for each device you've added and click 4. Record Plan (Scheduling) Record Plan from the sidebar. Select a camera and click the to set the recording parameters. Choose your Record Type for continuous or for Motion Detection) and set the weekly schedule grid. . You can use the button to apply this same schedule to other cameras. 5. Playback Recorded Footage Go back to the Home menu and select From the device tree on the left, find your Select the camera, set the date and time, and click to view the videos stored on your computer's hard drive. specifically for this PC-NVR setup? 2 Oct 2024 —

Click, "Record Plan" on the left hand side. * On this page you can configure the recording schedule for your device. Dahua Wiki Team 2 Oct 2024 —

Smart PSS is Dahua's legacy (but still widely used) video management software. The "PC-NVR" feature allows a standard Windows computer to act as a recording server, storing footage directly on its hard drive—no dedicated hardware NVR needed. feature in SmartPSS allows you to turn your

Troubleshooting Common Issues

Smart PSS PC NVR Setup — Step-by-step Guide

Step 6: Live View and Playback

In the Smart PSS interface, click on Live View to view live footage from your cameras.
Click on Playback to view recorded footage.

Tips and Troubleshooting

Make sure your PC-NVR device meets the system requirements for Smart PSS.
Check the IP camera compatibility list to ensure your cameras are supported.
If you encounter issues with remote access, check your port forwarding settings and DDNS configuration.

Conclusion

Setting up PC-NVR within the SmartPSS or SmartPSS Lite software turns your computer into a recording server, allowing it to store video directly from your cameras or a dedicated NVR. 1. Installation & Initial Configuration Troubleshooting Common Issues Smart PSS PC NVR Setup

Before starting, ensure your PC meets the minimum requirements, such as Windows 7/8/10/11 and at least 1GB to 8GB of RAM depending on the number of cameras.

Download & Install: Get the software from official sources like the Dahua Wiki. During installation, ensure the PC-NVR component is checked.

Initial Login: Open the software and set a password. This password is for the software itself and does not change your camera or NVR passwords.

Enable PC-NVR: From the main menu, click PC-NVR and toggle the power/switch icon to "On." The status should change to "Online" once enabled. 2. Disk Allocation PC NVR Setup

Step 2: Initial Launch & Login

Open Smart PSS.
Create a local login password (this is for the software interface on this PC).
Default view opens with no devices.

Integration with Home Assistant

Use the Dahua integration in Home Assistant (HACS).
Stream camera feeds and receive motion events via MQTT.

10. Troubleshooting — quick checklist

Cannot add device:
- Confirm IP, port, username/password.
- Ping device from PC.
- Temporarily disable firewall/antivirus.
No video in Live View:
- Check camera connections and NVR channel status.
- Verify stream type (Main/Sub) and bandwidth.
Recording not saving:
- Ensure HDD is present, formatted, and has free space.
- Check recording schedule and event detection settings.
Playback errors or corrupted export:
- Try exporting a shorter clip or use device’s built-in conversion utility.

Step 5: Accessing Recorded Footage (Playback)

Smart PSS shines when reviewing footage.

Click the "Playback" icon on the main menu.
Select the camera you wish to view from the list on the left.
Double-click the camera to load it into the window.
At the bottom of the screen, select the Date and the Time range.
Click the Play button.
You will see a timeline with colored bars indicating when motion was detected or recording took place. You can click directly on the timeline to jump to that moment.