Smartpack2 Touch User Manual High Quality May 2026
The Eltek Smartpack2 Touch Go to product viewer dialog for this item.
is the master controller for your DC power system, featuring a high-resolution color touchscreen designed to mimic smartphone navigation. It provides local monitoring, configuration, and alarm management without needing an on-site PC. 1. Getting Started Physical Interface: Touchscreen: Use for menu navigation and system status. Front LEDs: Green: System ON/Normal operation. Yellow: Warnings or Minor alarms. Red: Major alarms.
Side Panel: Pull the handle's knob slightly outward to open the right side, revealing an SD card slot for firmware updates or setup storage, and a temporary Ethernet port. Default Credentials:
PIN: 0003 (required for changing settings like float voltage). Web Login: User admin, Password admin. 2. Common Menu Operations Navigation Path Set Float Voltage
Main Menu → Sys. Config → Power System → General System Config → Reference Voltage View Battery Info Main Menu → User Options → Battery Info Check Alarms
Tap the alarm symbol on the home screen to see the active alarm list View Network Info Device Settings → Network Interface 3. Key System Functions
Monitoring: Real-time display of battery voltage, rectifier current, and load current.
Service Mode: You can disable external alarms while performing maintenance to prevent false triggers.
Configuration Backup: Save your system setup to an SD card for easy rollout to other systems.
Remote Access: Connect via Ethernet to use a web browser or SNMP for remote monitoring and control. 4. Safety Warnings
Electrical Hazard: Always disconnect external supply breakers and internal battery/load fuses before starting electrical installation.
High Voltage: Systems 60V and higher must only be installed in Restricted Access Locations (RAL).
Grounding: You must connect the AC earth wire (PE) before connecting any AC input cables.
For more specific troubleshooting or wiring diagrams, you can download the full Smartpack2 Touch User's Guide (PDF).
Configuration Guide - Eltek Smartpack and Compack Controllers
The Eltek Smartpack2 Touch is a Linux-based master controller for power systems, featuring an interactive touch display, comprehensive monitoring, and configuration via web interface or local menu. It coordinates system operations, including battery management and alarm configuration, requiring strict adherence to installation safety protocols. For detailed technical specifications, refer to the User Guide for Smartpack2 Touch Kitsap 911 Modular HE with Smartpack2 Touch - Kitsap 911
The Smartpack2 Touch is a state-of-the-art control system designed to manage and monitor power supply systems with high efficiency and precision. Serving as the central hub for modern energy installations, it combines advanced hardware capabilities with an intuitive user interface. This system is engineered to optimize power distribution, ensure battery health, and provide operators with real-time data to maintain seamless operations. Understanding its operation, interface, and management protocols is essential for maximizing the reliability of critical power infrastructure. System Architecture and Core Functions
The foundation of the Smartpack2 Touch lies in its distributed control architecture. Unlike traditional centralized systems, it utilizes a modular approach that separates control functions to enhance reliability.
Master Controller: Acts as the main brain, processing data and managing system-wide communication.
Basic Controller: Handles localized monitoring and emergency operations if the main unit loses communication.
I/O Modules: Provide flexible expansion for monitoring digital and analog inputs, such as temperature and fuse alarms.
Energy Management: Features advanced algorithms for peak shaving, battery testing, and efficiency optimization.
This distributed design ensures that even if one component fails, the critical power supply to the load remains uninterrupted. Navigating the Touch Interface
The defining feature of this controller is its high-resolution color touch screen, which replaces complex physical keypad matrices with a modern, user-friendly graphical interface.
Status Bar: Located at the top, showing active alarms and overall system health at a glance.
Main Menu: Offers categorized access to live measurements, historical logs, and system settings.
Home Screen: Displays vital statistics, including total load current, battery voltage, and active power source.
Interactive Graphs: Allows operators to visualize load trends and battery performance directly on the screen.
The interface is designed with a shallow menu structure, minimizing the number of taps required to reach critical parameters or clear active alarms. Battery and Power Management
Effective battery management is paramount to ensuring continuous uptime during grid failures. The Smartpack2 Touch incorporates intelligent battery handling protocols to prolong lifespan and ensure readiness.
Temperature Compensated Charging: Automatically adjusts the charging voltage based on ambient battery temperature to prevent overheating or undercharging.
Scheduled Battery Tests: Conducts routine discharge tests to evaluate real capacity and detect failing cells before a critical outage occurs.
Current Limiting: Protects batteries from excessive charging currents that could lead to thermal runaway.
Low Voltage Battery Disconnect (LVBD): Safely disconnects batteries during extended outages to prevent deep discharge damage. Configuration and Remote Communication
While the physical touch screen provides excellent localized control, the system is fully equipped for modern network integration and remote fleet management.
Web Interface: Built-in web server allows full access to the controller via standard internet browsers.
SNMP Support: Enables integration into standard network management systems for automated trap alerts.
Modbus Communication: Facilitates data sharing with building management systems and industrial SCADA setups.
Security Protocols: Features multi-level user authentication to prevent unauthorized setting modifications.
In conclusion, the Smartpack2 Touch represents a significant leap forward in power system management. By bridging the gap between complex industrial power requirements and intuitive consumer-grade touch interfaces, it empowers operators to maintain high availability. Proper mastery of its interface, localized control functions, and remote communication capabilities ensures that critical infrastructure remains powered, monitored, and optimized against the demands of modern energy grids.
Smartpack2 Touch is a high-end monitoring and control unit used in Eltek's modular DC power systems. Unlike earlier models that required physical buttons, the Touch version features a 4.3" high-resolution TFT color display with a capacitive touch screen for navigation and configuration. Core Documentation User Guide - Smartpack2 Touch Controller smartpack2 touch user manual
: This is the primary manual for hardware installation and basic operation (Doc# 350130.013). Eltek Controllers Configuration Guide
: A detailed walkthrough for setting up system parameters like float voltage, battery limits, and network settings (Doc# 370013.063). Eltek Controller Web Interface Guide
: Specifically covers remote management via the built-in web server (Doc# 370035.013). Key Features & Operation Modular HE with Smartpack2 Touch - Kitsap 911
SmartPack2 Touch User Manual: A Comprehensive Guide The SmartPack2 Touch is the next generation of power system controllers, offering a highly intuitive touchscreen interface to manage complex DC power plants. Whether you are overseeing a telecommunications site or an industrial power hub, this manual provides the essential steps to get your system up and running. 1. Hardware Overview
The SmartPack2 Touch features a 4.3-inch high-resolution color display. Unlike its predecessors, which relied heavily on navigation buttons, the "Touch" model allows for direct interaction with icons and menus. Key Components:
Touchscreen: The primary interface for monitoring and configuration.
USB Port: Located on the front for firmware updates and configuration uploads/downloads. Status LEDs: Green (Power): System is operational. Yellow (Warning): Non-critical alarm present. Red (Alarm): Critical system fault. 2. Navigating the Interface
The home screen provides a high-level "Dashboard" view of your system's health.
System Status: Shows total load, battery voltage, and current.
Menu Icon: Tap the three horizontal lines (hamburger menu) to access deep settings. Back Button: Returns you to the previous screen. Home Button: Instantly returns you to the main dashboard. 3. Initial Configuration
When you first power on the SmartPack2 Touch, you will need to perform a basic setup to ensure accurate monitoring. Setting the Language and Time Navigate to Settings > General > Language.
Set the Date and Time under the same menu to ensure log timestamps are accurate. Battery Setup This is the most critical step for system longevity. Go to Settings > Battery. Select the Battery Type (e.g., Lead Acid, Li-Ion, NiCd). Input the Battery Capacity (Ah) and the number of strings.
Configure the Charge Current Limit to prevent overheating during recharge cycles. 4. Alarm Management
The SmartPack2 Touch allows for granular control over what triggers a notification.
Thresholds: You can set "High Voltage" and "Low Voltage" disconnect points under Settings > Alarms.
Relay Mapping: Assign specific alarms (like "Mains Failure") to physical output relays on the controller’s backplane.
Viewing Logs: Tap the Alarm Log icon on the home screen to see a chronological history of system events. 5. Connectivity and Remote Access
The controller is designed to be managed from anywhere via an Ethernet connection.
IP Configuration: Go to Settings > Communication > Ethernet. You can choose DHCP or assign a Static IP.
Web Interface: Once the IP is set, type it into any web browser on your network to access the full management suite remotely.
SNMP: For centralized monitoring, enable SNMP (v1, v2c, or v3) to integrate with your Network Management System (NMS). 6. Maintenance and Troubleshooting Firmware Updates
To keep your system secure and efficient, update the firmware periodically:
Download the latest firmware from the manufacturer’s portal. Save it to a FAT32-formatted USB drive.
Insert the drive into the SmartPack2 Touch and select Maintenance > Update Firmware. Resetting the Controller
If the screen becomes unresponsive, you can perform a "Soft Reset" by holding the pinhole reset button for 5 seconds. This will restart the controller without interrupting the DC power to your loads. Summary Table: Quick Commands Navigation Path Check Load Home Dashboard Change Voltage Settings > Power System > Voltage Control Export Logs Maintenance > USB > Export Logs Test Relays Maintenance > Diagnostics > Relay Test
Disclaimer: Always refer to the specific wiring diagrams provided with your power plant rack, as physical configurations may vary by installation.
The Smartpack2 Touch is an advanced control system used primarily for Eltek power systems, featuring a high-resolution color display and a touchscreen interface for managing power modules, batteries, and site equipment. Based on standard operating procedures for the device, 1. Interface & Navigation
Home Screen: Displays real-time status icons for the system (AC Mains, Rectifiers, Battery, and Load). Green icons indicate normal operation, while yellow or red icons signal active alarms.
Menu Structure: Access settings by tapping the "Menu" icon. Navigation is typically categorized into Status, Logs, Control, and Configuration.
Screen Lock: Most units feature an automatic screen timeout. Tap anywhere to wake the screen; a PIN may be required for configuration changes. 2. System Monitoring
Live Metrics: View current voltage, total load current, and battery charge/discharge rates.
Active Alarms: A dedicated alarm list provides descriptions of current issues. Tapping an alarm often reveals the "Probable Cause" and "Suggested Action."
Event Logs: Review historical data, including when alarms were triggered and cleared, to identify recurring site issues. 3. Operational Tasks
Battery Testing: Manual initiation of battery capacity tests or boost charging cycles can be done through the "Battery" submenu.
Module Management: View the status of individual rectifier modules, including their temperature and output current.
Communication Settings: Configure IP addresses, SNMP settings, and email notifications for remote monitoring via the Ethernet port. 4. Safety & Maintenance
Firmware Updates: Instructions for updating the controller via a microSD card or the web interface.
Emergency Procedures: How to manually override the Low Voltage Load Disconnect (LVLD) or Battery Disconnect (LVBD) if necessary. Quick Tips for Users
Cleaning: Use a dry or slightly damp anti-static cloth. Avoid chemical cleaners that could damage the touchscreen overlay.
Default Credentials: If you are locked out, refer to your site administrator, as default factory passwords are often changed during installation for security. The Eltek Smartpack2 Touch Go to product viewer
The Eltek Smartpack2 Touch is a 3.2-inch touchscreen controller for managing DC power systems, providing local monitoring, configuration, and Ethernet-based remote management. The system requires accompanying Basic and I/O units for full functionality, with key documentation covering installation, navigation, and configuration. Access the primary user guide for the Smartpack2 Touch Controller User's Guide - Smartpack2 Touch Controller 29-May-2018 —
The official user manual for the Eltek Smartpack2 Touch Controller provides comprehensive instructions for installation, configuration, and operation of the DC power system. Core Documentation
Smartpack2 Touch User's Guide (PDF): This is the primary manual (Doc. No. 350130.013) covering electrical installation, maintenance, and basic interface navigation.
Eltek Controllers Configuration Guide (PDF): Detailed guide (Doc. No. 370013.063) for establishing direct network connections and setting parameters like float voltage and battery charge limits. Key Operational Steps
Accessing the System: You can access the controller via a computer connected to the RJ-45 socket. Use the default credentials: Username: admin, Password: admin.
Web Interface: Configuration can be managed through the Eltek Web Interface, which allows for real-time monitoring of alarms and logs.
Firmware Upgrades: Updates can be performed using a microSD card or the Eltek Network Utility (ENU). Detailed steps are found in the Software Upgrade Procedure. Safety & Maintenance Warnings
Electrical Safety: Always disconnect external supply circuit breakers and internal battery/load fuses before starting any electrical installation.
Ventilation: Keep ventilation inlets and outlets clear to avoid equipment damage from overheating.
Surge Protection: It is mandatory to install Surge Protection Devices (SPDs) to prevent damage from external transients or lightning. User's Guide - Smartpack2 Touch Controller
1. Introduction
The SmartPack2 Touch is a programmable control unit designed for industrial packaging lines. Its 7-inch capacitive touchscreen interfaces with PLC-driven actuators (heat sealers, film feeders, cutters). This manual covers safe startup, parameter configuration, fault recovery, and daily maintenance.
4. Standard Operating Procedure (SOP)
12. Warranty & Support
SmartPack2 Touch includes a 2-year limited warranty covering defects in materials, battery, and touch electronics (excluding normal wear, water immersion, or physical damage).
Contact:
support@smartpack.com
+1 (888) 762-7725
Live chat: smartpack.com/help
Manual revision 2.0 – April 2026
End of complete manual.
The Smartpack2 Touch is a powerful master controller used for monitoring and controlling Eltek's DC power supply systems . It features a local touch-screen user interface and serves as the central hub for a distributed control system, typically used in conjunction with "Basic" and "I/O" controllers . Core Documentation Resources
For full technical details, refer to the following official guides:
Primary User Guide: User's Guide - Smartpack2 Touch Controller (Issue 1.0, 2018). This is the specific manual for the touch variant .
Configuration Guide: Eltek Controllers Configuration Guide (2022). Covers setting float voltages, battery current limits, and network setup across multiple Eltek models . Key Features & Functionality
User Interface: High-resolution TFT display (320x240 pixels) that supports hierarchical software menus for local system configuration .
Monitoring & Control: Manages rectifiers, battery charging, and alarm relays .
Connectivity: Features an Ethernet port for remote access via web-based "WebPower" interface or SNMP .
System Integration: Connects to other nodes (like the Smartpack2 Basic) via a CAN bus to form a complete distributed control network . Critical Safety & Installation Modular HE with Smartpack2 Touch - Kitsap 911
The SmartPack2 Touch is a powerful control unit designed to manage and monitor power systems with ease. This guide covers everything from initial navigation to advanced configuration. 🏗️ Getting Started with the Interface
The SmartPack2 Touch features a high-resolution color display. It uses an intuitive icon-based menu system. Home Screen: Displays system status, voltage, and current.
Navigation: Use the touch-sensitive screen to swipe between dashboards.
LED Indicators: Green (OK), Yellow (Warning), and Red (Alarm).
USB Port: Located on the front for firmware updates and data logging. ⚙️ Core Configuration Steps
To set up your system, you must access the main configuration menu. Most settings require a pin code (default is often 0003). Battery Management
Select Battery Type: Choose between Lead Acid, NiCd, or Lithium. Capacity Settings: Enter the total Ah of your battery bank.
Charge Control: Set the boost charge and temperature compensation parameters. Rectifier Setup
Inventory: The controller automatically detects connected rectifiers.
Efficiency: Enable "High Efficiency" mode to optimize power consumption during low-load periods. 🚨 Understanding Alarms and Troubleshooting
The SmartPack2 Touch provides detailed logs to help you identify system issues quickly. Common Alarm Types
Critical: LVD (Low Voltage Disconnect) or Rectifier Failure. Major: Battery Test Failure or Mains Failure.
Minor: Temperature sensor disconnected or fan speed warning. How to Clear Alarms Navigate to the Alarm Icon. Review the active list. Fix the physical issue (e.g., replace a fuse).
The controller will auto-clear once conditions return to normal. 🌐 Remote Access and Connectivity
One of the best features of the SmartPack2 is its web-based interface. Ethernet Port: Plug into your local network.
Web Browser: Enter the IP address shown on the Touch screen into your PC browser.
SNMP: Support for integration into high-level Network Management Systems. 🛠️ Maintenance and Updates End of complete manual
Keep your system running smoothly with regular software maintenance.
Backup: Always save your configuration file to a USB drive before making changes.
Firmware Updates: Download the latest version from the official portal and upload via the web interface.
Screen Cleaning: Use a soft, dry microfiber cloth. Avoid harsh chemicals. If you'd like, I can help you further if you tell me:
The specific model of power system you are using (Flatpack, etc.)
If you are trying to configure a specific feature like SNMP or Lithium batteries If you are currently seeing a specific error code I can provide the exact steps for your specific situation.
Smartpack2 Touch User Manual: A Comprehensive Guide
The Smartpack2 Touch is a state-of-the-art device designed to make your life easier and more convenient. With its advanced features and user-friendly interface, it's no wonder that many people are eager to get their hands on this innovative product. However, to get the most out of your Smartpack2 Touch, it's essential to understand how to use it properly. That's where this user manual comes in.
In this comprehensive guide, we'll walk you through the features, settings, and operations of the Smartpack2 Touch. Whether you're a new user or just looking for a refresher, this manual will help you navigate the device with ease.
Getting Started
Before we dive into the nitty-gritty of the Smartpack2 Touch, let's start with the basics. Here's what you need to do to get started:
- Unboxing: Carefully remove the device from its packaging and ensure that all the included accessories are present.
- Charging: Connect the device to a power source using the provided charger and let it charge for at least 2 hours before using it for the first time.
- Powering On: Press and hold the power button until the device turns on.
- Initial Setup: Follow the on-screen instructions to complete the initial setup process, which includes selecting your language, setting up your Wi-Fi connection, and configuring your device settings.
Device Overview
The Smartpack2 Touch is a sleek and compact device with a user-friendly interface. Here are the key components:
- Touchscreen Display: The device features a high-resolution touchscreen display that allows you to navigate and access various features and settings.
- Navigation Buttons: The device has several navigation buttons, including a back button, a home button, and a settings button.
- Ports and Connectivity: The device has several ports, including USB, HDMI, and audio jacks, which allow you to connect it to other devices and peripherals.
Settings and Configuration
To get the most out of your Smartpack2 Touch, it's essential to configure your settings properly. Here's how:
- Wi-Fi Settings: Go to Settings > Wi-Fi to connect to a wireless network or manage your existing connections.
- Display Settings: Go to Settings > Display to adjust the screen brightness, orientation, and timeout settings.
- Sound Settings: Go to Settings > Sound to adjust the volume, notification sounds, and other audio settings.
Using the Smartpack2 Touch
Now that you've set up your device, it's time to start using it. Here are some basic operations:
- Navigating the Interface: Use the touchscreen display or navigation buttons to navigate the device's interface.
- Launching Apps: Tap on an app icon to launch it.
- Switching Between Apps: Use the navigation buttons or swipe gestures to switch between open apps.
Advanced Features
The Smartpack2 Touch has several advanced features that make it a powerful and versatile device. Here are some of the key features:
- Multi-Touch Gestures: The device supports multi-touch gestures, which allow you to perform various actions with two or more fingers.
- Notification Center: Swipe down from the top of the screen to access the notification center, which displays important notifications and alerts.
- Customization: The device allows you to customize various settings and features, including the home screen, lock screen, and notification shade.
Troubleshooting and Maintenance
Like any device, the Smartpack2 Touch may encounter issues or require maintenance. Here are some troubleshooting tips and maintenance recommendations:
- Restarting the Device: Press and hold the power button until the device turns off, then press and hold it again until it turns back on.
- Updating Software: Go to Settings > System > Software Update to check for and install software updates.
- Cleaning the Device: Use a soft cloth and mild soap to clean the device's exterior and screen.
FAQs and Support
If you have any questions or need further assistance with your Smartpack2 Touch, here are some resources:
- User Manual: This user manual provides comprehensive information on the device's features, settings, and operations.
- FAQs: Visit the manufacturer's website for a list of frequently asked questions and answers.
- Support Contact: Contact the manufacturer's support team via phone, email, or online chat for personalized assistance.
Conclusion
The Smartpack2 Touch is a powerful and versatile device that can make your life easier and more convenient. With its advanced features and user-friendly interface, it's an excellent choice for anyone looking for a reliable and efficient device. By following this user manual, you'll be able to get the most out of your Smartpack2 Touch and enjoy a seamless user experience.
The Eltek Smartpack2 Touch Go to product viewer dialog for this item.
is the master controller for medium-to-large DC power systems, acting as the primary interface for plant monitoring and regulation. It is a distributed control platform designed to provide "smart-phone" levels of ease of use for power system managers. System Architecture
A complete Smartpack2 control system typically consists of three modular units connected via a CAN bus:
SMARTPACK2 TOUCH MASTER CONTROLLER INDUSTRIAL DISTRIBUTED CONTROL POWER SYSTEM $788.64$848 eBay - the_nautical_stores Go to product viewer dialog for this item.
Contains the interactive display and serves as the primary user interface.
Smartpack2 Basic Industrial 242100.601 Power Monitoring Module eBay - heartofautomation Go to product viewer dialog for this item.
Handles internal data aggregation, housekeeping, and power system wiring monitoring. Eltek Valere 242100.502 I/o Monitor Type 2 eBay - atlasshipcareservices Go to product viewer dialog for this item. Manages external alarm inputs and output relays. Key Features & Connectivity
Physical Interface: High-resolution interactive touch display with physical handles for locking the module into its housing.
Network Ports: Includes two Ethernet ports for local or network interfaces and two USB host ports for adding Wi-Fi or 4G dongles.
Web Interface: Features a web-based UI (CWUI) that allows for full configuration and monitoring via a standard web browser.
Security: Advanced security protocols and support for SNMP (v2c/v3) and Modbus RTU for integration with Network Management Systems.
Storage: MicroSD card slot for data logging and firmware upgrades. Core Operations & Configuration
The user manual details several critical procedures for managing DC power plants: Modular HE with Smartpack2 Touch - Kitsap 911
The "Dead Display" Fix
If the screen is black but fans are spinning: The unit is in "Night mode" or the backlight has failed. Hold Select + Up button for 10 seconds to force a backlight reset.
3. Product Diagram / Labels
- Touchscreen display
- Power button / long‑press for power on/off
- USB‑C input/output (PD)
- USB‑A output (QC)
- Wireless charging surface
- LED flashlight (with mode)
- Battery status LEDs (if present)
- Reset pinhole
6. LED Battery & Status Strip (Right Shoulder Strap)
The 10-LED strip provides visual feedback:
- Solid green (5 LEDs) → 80–100% battery
- Solid yellow (3–4 LEDs) → 40–79% battery
- Solid red (1–2 LEDs) → 10–39% battery
- Flashing red (1 LED) → <10% – charge soon
- Pulsing white → Currently charging external device
- Rapid blue flashing → Heated pocket active
- Triple red flash every 10s → Anti-theft mode triggered (pack moved without authorization)
7. Using the Smart Features
4. First-Time Setup
