To download software for the Strong SRT 4940 , you should use the official Strong Technologies Download Center . Because the
is a discontinued model, its specific firmware may no longer appear in the "Latest Software" list, but it can often be found in the general Download Area. Software Download & Update Steps
Locate Firmware: Visit the official Strong Technologies software page and search for the
model. Ensure you download the correct .bin file to avoid damaging your device. Strong Srt 4940 Software Download
Prepare USB: Format a virus-free USB flash drive to FAT32 and copy the downloaded firmware file directly onto it. Install Update: Plug the USB drive into your receiver. Using the remote, navigate to Menu > USB > Data Transfer. Select the firmware file and press OK to begin the update. Safety & Verification
Avoid Fakes: Be cautious of unofficial "patch" sites. You can verify your device's authenticity by entering its serial number on the Product Genuineness Verification page.
Power Stability: Do not turn off the receiver during the update process, as a power failure can "fry" or permanently disable the decoder. To download software for the Strong SRT 4940
Q: Is the Strong Srt 4940 software the same as the SRT 4950? A: No. Never cross-flash. Even similar model numbers have different chipsets.
Q: Will updating delete my channel list?
A: Yes. Always back up your channel list via USB (Menu > USB > Backup) before updating.
Q: My receiver shows "SW Upgrade Failed." What now? A: Use a different USB drive. Some SRT 4940 units are picky with USB 3.0 drives—use an old USB 2.0 stick (4GB–8GB). Part 7: Frequently Asked Questions (FAQ) Q: Is
Q: Can I downgrade to an older software version? A: Yes, using the same USB method. However, Strong does not recommend it unless the newer version introduced a bug.
After a successful Strong SRT 4940 software download and installation, you must perform a factory reset to clear old configuration data.
As of 2025, the latest stable firmware versions reported for the Strong SRT 4940 include:
To check your current version: MENU > System Information > Software Version.
If your version is older than 2021, you should definitely seek a software update.