Systec It3 User Manual //free\\ 90%

SysTec IT3 user manual serves as a comprehensive technical guide for operating and configuring the IT3 weighing terminal, an industrial-grade indicator widely used in harsh environments like the food and pharmaceutical industries. The manual provides critical instructions for the device's IP69K-rated stainless steel housing , high-resolution 5-inch color display , and specialized weighing software. Core Functionality and Setup

The manual details the terminal's ability to connect to one or two analog strain gauge scales or digital load cells. It provides step-by-step procedures for: Calibration:

Outlining single, multiple-range (e.g., 3 x 3000 d), or multi-interval scale configurations with a Weights & Measures (W&M) approved resolution of up to 10,000 d. Operating Modes: Instructions for preinstalled applications including: General weighing and totalizing. First/second weighing or single-pass with known tare. Count & Fill: systec it3 user manual

Parts counting with piece weight optimization and simple filling control (9 product memory). Hardware Interface: Guidelines for using the sealed membrane keyboard for alphanumeric entries and the five context-sensitive for program-specific functions. Data Management and Connectivity

A significant portion of the manual covers legal-for-trade data handling: Alibi Memory: SysTec IT3 user manual serves as a comprehensive

Chapter 20 specifically explains storing approved weights in an Alibi memory module for verification, accessible via the command through Ethernet or RS232. Connectivity Options:

Documentation for integrating the terminal into PC networks or fieldbus systems like Profinet, Profibus DP, and Ethernet/IP Configuration Tools: IT CONFIGURATOR PC tool to customize print layouts and network settings. Safety and Maintenance The manual emphasizes operational security and longevity: IT3 series weighing indicators Chapter 6: Driver and Software Installation

Chapter 6: Driver and Software Installation

Scenario 3: The touchscreen is unresponsive

Manual solution: Perform a soft reset by pressing and holding the power button (bottom right corner) for 10 seconds. If that fails, disconnect mains power for 30 seconds. Do not use a hard reset button—there isn't one.

7. Connections & Interfaces

Include code block examples for serial settings:

Serial: 115200 baud, 8N1, no flow control

8. Quick Start — 10-minute setup

Step 1: Connect power. Step 2: Connect Ethernet to network with DHCP. Step 3: Power on; wait for LED pattern (describe). Step 4: Access web UI at http://192.168.1.100 (default) or discover via mDNS at it3.local. Step 5: Login with default credentials (admin / password123) — immediate password change required. Step 6: Run setup wizard: set hostname, network, NTP, update firmware.

Mounting

Chapter 1: Safety and Precautions

Scenario 1: Cycle aborts with "Pre-vacuum timeout"

Manual solution: Check the door seal for debris. Run a leak test. If leak rate > 1 mbar/min, replace the seal (part number 12456-IT3).

5.1 Calibration Procedure

  1. Enter the Calibration Menu (passcode protected).
  2. Zero Calibration: Ensure the scale is empty. Press the ZERO key. The display confirms the zero point.
  3. Span Calibration: Place a known test weight (e.g., 50% or 100% of capacity) on the scale.
  4. Enter the exact weight value using the numeric keys.
  5. Press ENTER to confirm. The unit calculates the slope (mV/V factor).