Tvs Rp 3160 Star Pos Printer Driver Here

The TVS RP 3160 Star Go to product viewer dialog for this item. (often referred to as the RP 3160 Gold Go to product viewer dialog for this item.

) is a high-speed thermal receipt printer widely used in retail and hospitality for its 160 mm/sec print speed and durable auto-cutter. To ensure peak performance, it is essential to install the correct drivers for your operating system. Driver Download & Installation

You can obtain official drivers and support directly from the TVS Electronics Product Support Page. Installation Steps:

Download: Navigate to the "Thermal Receipt Printers" section on the TVS Electronics site and select the RP 3160 model. tvs rp 3160 star pos printer driver

Extract: Right-click the downloaded ZIP file and extract the contents to a folder.

Run Setup: Open the folder and double-click the setup.exe or installer file.

Configure Port: During installation, select your operating system (e.g., Windows 10/11) and choose the correct interface port—typically USB or Serial. The TVS RP 3160 Star Go to product

Finish: Once the installer finds the connected printer, click "Finish" and print a test page to verify connectivity. Key Specifications Go to product viewer dialog for this item. is designed for heavy-duty retail environments. Product Downloads - TVS Electronics

Here’s a step-by-step guide for installing and troubleshooting the TVS RP 3160 Star POS printer driver.

Part 5: Configuring Printer Properties for POS Software

Simply installing the driver is not enough. You must configure the Device Settings. Part 5: Configuring Printer Properties for POS Software

  1. Open Control Panel > Devices and Printers.
  2. Right-click TVS RP 3160 > Printer properties.
  3. Click the Device Settings tab.
  4. Paper Size: Set to 2.9 inches x 3276 inches (thermal roll) or 80mm x continuous roll.
  5. Paper Type: Select Thermal paper.
  6. Cut Option: Select Partial cut (center) if you want the auto-cutter to operate.
  7. Cash Drawer: Ensure "Cash drawer 1 is connected" is checked.

4. Linux Installation (CUPS)

  1. Install CUPS: sudo apt-get install cups (Debian/Ubuntu).
  2. Install Star CUPS driver if available or use generic CUPS "Raw Queue" and let POS software send ESC/POS commands.
  3. Add printer via localhost:631 or system-config-printer; choose driver or "Raw".
  4. Set page size to match paper width and disable page scaling.
  5. Test with lp or echo -e commands sending ESC/POS sequences:
    • Example: echo -e "Hello\n\n\n" > /dev/usb/lp0
    • Or: printf "\x1B\x40Hello\n" | lp -d RP3160

4. Configuring the Driver (Critical Steps)

Once installed, the default settings often need tweaking for POS software to recognize the printer correctly.

Scenario A: OPOS / JavaPOS Integration

If the POS software requires OPOS (OLE for Retail Point of Sale), the standard Windows driver is not enough.

  1. Install the TVS ADK (Application Development Kit) or OPOS drivers.
  2. Use the "Logical Device Name" configuration tool to map the printer hardware to a software name (e.g., "ReceiptPrinter").
  3. The POS software will communicate via this logical name rather than the Windows Printer Spooler.