Tysso Prp-085iiit Driver Download !!exclusive!! Windows 10 95%

Complete Guide: Tysso PRP-085IIIT Driver Download for Windows 10 (Installation & Troubleshooting)

If you’ve just purchased a Tysso PRP-085IIIT receipt printer or are trying to get an old one working on a modern PC, you have likely landed on this page searching for one critical thing: the correct driver for Windows 10.

The Tysso PRP-085IIIT is a popular thermal receipt printer used in retail, hospitality, and ticketing systems. However, like many specialized peripheral devices, finding the right driver—especially for Windows 10 (32-bit or 64-bit)—can be frustrating. Outdated manufacturer websites, broken links, and generic drivers often lead to installation failures. Tysso Prp-085iiit Driver Download Windows 10

This long article will walk you through everything you need: official driver sources, step-by-step installation guides, compatibility notes, and common troubleshooting fixes. Go to Settings > Bluetooth & devices >

Step 5: Set as Default Printer (Optional)

  • Go to Settings > Bluetooth & devices > Printers & scanners.
  • Find Tysso PRP-085IIIT.
  • Click Set as default.

What this post covers

  • Where to get the driver
  • Which driver version to choose for Windows 10 (32-bit vs 64-bit)
  • Step-by-step installation instructions
  • Quick troubleshooting tips

Alternative: Using the Printer with Windows 10 via Ethernet (If Equipped)

Some Tysso PRP-085IIIT variants include an optional Ethernet module. To install: What this post covers

  1. Assign a static IP to the printer (default often 192.168.1.100).
  2. In Windows 10, go to Settings > Printers & scanners > Add a printer.
  3. Click The printer that I want isn’t listed.
  4. Select Add a printer using TCP/IP address.
  5. Enter the printer’s IP address.
  6. Use the same Tysso INF driver from above.
  7. Port will be Standard TCP/IP Port: IP_192.168.1.100.

Step-by-Step Installation Guide for Tysso PRP-085IIIT on Windows 10

Follow these steps exactly. Do not plug in the USB cable until instructed.

Problem 3: Cash drawer doesn’t open

Fix: Check your POS software’s cash drawer command. Use a raw ESC/POS command test tool (e.g., “POS Test Tool”) and send ESC p 0 50 50. If that works, your driver is fine; configure the software.

Step 4: Connect the Printer

  1. Plug the USB cable into a USB 2.0 port (avoid USB 3.0 hubs).
  2. Turn on the Tysso PRP-085IIIT (paper roll loaded, cover closed).
  3. Windows 10 will auto-detect and assign a COM port or USB virtual printer port (e.g., USB001).