Upgrade Receiver Iclass 9696x Pvr 2013 Now

Because the iClass 9696X PVR (especially the 2013 model) is an older satellite receiver, the upgrade process is not like updating a modern app. It involves finding a specific "Firmware" file (usually a .abs or .bin file) and loading it onto the receiver via USB.

Disclaimer: Proceed at your own risk. Loading incorrect firmware can "brick" (permanently damage) your receiver. Ensure the firmware is specifically for the iClass 9696X and not a similar model like the 9696 (without X) or 9999, as this will damage the device.

Here is the step-by-step guide to upgrading your iClass 9696X PVR.

3. Power Supply Upgrade (Reliability Fix)

The most common failure in the 2013 model is bulging capacitors in the power supply unit (PSU). This causes freezing, failed recordings, and boot loops.

2. Add an Internal Cooling Fan (For 9696x models with vents)

The 2013 revision runs hot – especially when recording one channel and playing another. Overheating causes freezes.

• Mod: 40mm or 50mm 5V silent fan, glued over the main heatsink, powered via internal 5V USB header.
• Result: 15°C lower operating temp → no more mid-recording shutdowns.

Part 2: Firmware Upgrade – The Most Critical Update

The single most effective upgrade for the Iclass 9696x PVR 2013 is a firmware update. Stock firmware from 2013/2014 is buggy and lacks modern channel sorting.

Step 3: Perform the Update

1. Turn on the receiver via the rear switch.
2. Insert the USB stick into the front USB port.
3. Press the MENU button on the remote.
4. Navigate to Tools or System Settings.
5. Select Upgrade by USB.
6. The receiver should detect the file. Ensure the "Mode" is set to All Code or Main Code (choose All Code for a complete refresh).
7. Select Start or Upgrade.
8. Wait. The screen will show a progress bar (0% to 100%). The front LED display will likely show UPG or count up.
9. Do NOT touch the power.
10. Once complete, the receiver will reboot automatically.

Part 4: Software & Peripheral Upgrades

Not all upgrades involve hardware. Tailoring the software environment can transform daily use.

Method 2: The "Ali Upgrade" Tool (PC Method)

If the USB method fails or the receiver is stuck in a boot loop, you must use a PC. This was the professional repair method for 2013 units.

Requirements:

• Windows PC.
• RS-232 Cable (Serial Cable/Null Modem cable) connecting the PC to the receiver.
• Ali Upgrade Tool v1.0.1 (or similar flashing software).

Procedure:

1. Connect the RS-232 cable between the PC and the receiver (keep receiver OFF).
2. Open the Ali Upgrade Tool on your PC.
3. Select the correct COM Port (usually COM1).
4. Browse

Updating your Iclass 9696x PVR receiver with the 2013 firmware can improve system stability, channel reception, and overall performance Receiver Overview

The Iclass 9696x PVR is a digital satellite receiver known for its versatility. Key features include: : Stores up to 6,000 channels and 1,000 transponders.

: Supports one-channel recording while watching another, along with TimeShift and Live Screen Pause. Technical Specs

: MPEG-2 and DVB compliant, featuring a 256-color Graphic User Interface and Blind Scan support. Upgrade Methods Method 1: Upgrade via Serial Cable (PC)

This is the most reliable way to flash the 2013 firmware if your receiver is unresponsive. Prepare Hardware Upgrade Receiver Iclass 9696x Pvr 2013

: Connect your PC and the receiver using a serial cable (RS232C). Power Cycle

: Turn the receiver off and then on using the A/C Power switch on the rear panel. Enter Download Mode : When the front panel displays "on," press OK -> Exit -> OK -> Exit -> OK -> Exit

on the remote control. The panel should display "B-30" or "B-31," indicating it is ready. Load Firmware

: Open the PVR Loader software (v3.36 or similar), select your new firmware file, and click download.

: The system will automatically upgrade and reboot once finished. Method 2: Upgrade via USB

For a standard update, the USB method is quicker and doesn't require a PC connection.

Download the latest firmware and save it to a formatted USB flash drive. Plug the USB drive into the receiver's port. Navigate to the menu and select the USB Update Select the firmware file and confirm to begin the process. Crucial Tips Avoid Power Interruptions

: Do not turn off the receiver or unplug it during the update, as this can permanently damage the device. Backup Channels

: Upgrading firmware may reset your channel list; back up your settings to a USB before starting. for the latest 2013 firmware files? PVR Firmware Upgrade Instructions | PDF - Scribd

Upgrading an older satellite receiver like the Iclass 9696x PVR (often associated with

) can improve stability and unlock features. Given this model's age, most official support channels are no longer active, but you can still perform updates using files from community archives. Upgrade Methods

There are two primary ways to update the firmware on this device: Method 1: USB Flash Drive (Recommended)

This is the simplest method if your receiver still powers on and has a working USB port. Prepare the Drive: Format a USB flash drive to Get the File: Download the compatible firmware patch (often a file) from a trusted community source like Nasabbashi

Copy the file to the root directory of the USB drive and plug it into the receiver. HDD Interface Select Upgrade from HDD Select the firmware file and enter the default pin ( ) if prompted. The device will automatically upgrade and reboot. Do not power off during this process. Method 2: RS-232 Serial Cable Because the iClass 9696X PVR (especially the 2013

Use this method if the receiver is stuck on a "boot" loop or the USB method fails. Connection: Connect your PC to the receiver using an RS-232 Serial Cable Loader Software: Use a program like PVR Loader v3.36 on your PC. Power off the receiver from the back switch. On the front panel, press OK > Exit > OK > Exit > OK > Exit on the remote. The display should show , indicating it is ready to receive data.

Open the Loader, select the firmware file, and start the download. Important Tips Verify Model: Ensure you have the exact file for the

. Using software meant for different models (like the 9898) can "brick" the device.

If possible, back up your current channel list to USB before upgrading, as firmware updates often reset settings to factory defaults. Factory Reset: Many users recommend performing a Factory Reset

Before starting, you need a few essential items and environmental conditions: : A standard USB flash drive formatted to Software File

: The latest firmware or software file, often sourced from enthusiast communities like Stable Power

: A sudden power loss during the flashing process can "brick" the device (make it permanently unbootable). The Process: Step-by-Step Upgrade Extract and Transfer : Download the specific software for the iCLASS 9696X PVR

. Extract the file (if it's in a .zip or .rar format) and copy the raw software file to the root directory of your USB drive. Physical Connection

: Power off your receiver. Insert the USB drive into one of the USB ports, typically found on the back panel of the unit. Navigate the Menu : Power the receiver back on. Using your remote, press and navigate to the section. Select Upgrade By USB Execute the Flash : Highlight the software file you copied earlier and press . The receiver will begin the upgrade process. Wait for Reboot

: Do not touch the remote or unplug the device during this phase. It usually takes a few minutes. Once finished, the receiver will restart automatically The Aftermath: Final Calibration

After the reboot, your receiver is running the new software, but you aren't quite finished yet: Factory Reset : It is highly recommended to perform a Factory Default

reset (Menu > System Setting > Factory Default) to ensure no old software bugs interfere with the new version. Rescan Channels

: Since a factory reset wipes existing data, you will need to perform a fresh Blind Scan to repopulate your 6000-channel capacity. Why Upgrade? (Features of the 9696X PVR)

The iCLASS 9696X is a robust DVB-compliant receiver known for: PVR Capabilities : Recording one channel while watching another. Media Support : JPEG viewing and Picture-in-Picture (PIP) functions. Technical Ports : Features an RS232C port Mod: 40mm or 50mm 5V silent fan, glued

as a failsafe for software recovery if the USB method fails. Do you need help finding the specific software version

for your region or troubleshooting a "File Not Found" error?

Iclass 9696x Pvr Hdmi Digital Satellite Receiver - Tradeindia

Upgrading the Iclass 9696x PVR receiver (also known under the Hivion brand) typically involves updating its firmware via a USB flash drive. While official support for 2013-era models has largely moved to community archives, the manual update process remains consistent for these devices. Upgrade Preparation Hardware Requirements : A USB flash drive formatted to Software Acquisition

: You must find the specific firmware file for your model. Users often search for these on community forums or archival sites like Stability Check

: Ensure you have a stable power supply and good signal quality before starting, as a power failure during the update can permanently damage the receiver. Step-by-Step Upgrade Process Extract Files : Download the firmware (often a

file) and extract it from any compressed folders (.zip or .rar). Copy to USB

: Move the firmware file to the root directory of your USB drive. Insert and Boot

: Turn off the receiver, insert the USB into the rear port, and then turn the unit back on. Access Menu : Press the button on your remote. Navigate to Upgrade and select Upgrade By USB Execute Update : Select the correct file from the list and press . The process may take several minutes; turn off the device until it finishes. Auto-Restart

: The receiver will restart automatically once the upgrade is complete. Post-Upgrade Maintenance

After a successful update, it is highly recommended to perform a Factory Reset

to ensure the new software runs cleanly without conflicts from old data. : Menu > System Setting > Factory Default.

: This will erase your current channel list, requiring a full to restore your satellite channels. specific version

4. Software & Channel List Upgrade

Manually scanning 1,000+ channels is tedious. Upgrade your channel database.