Usb Vid0bb4 Amppid0c01 Verified

• VID (Vendor ID): 0BB4
• PID (Product ID): 0C01

This information is crucial for identifying a USB device to your computer, especially when the device is not recognized properly or when you need to install specific drivers.

Method 2: Manual Installation with Google USB Driver

This is the most reliable method for fastboot access.

1. Download Google USB Driver from Android Studio (or standalone ZIP).
2. Extract the ZIP to a folder (e.g., C:\android-usb-driver).
3. In Device Manager, right-click the device → Update driver → Browse my computer.
4. Point to the extracted folder. Make sure "Include subfolders" is checked.
5. Windows will find android_winusb.inf. Select Android Bootloader Interface.
6. Click Install – you will see "Verified" after successful installation.

4. Technical Significance

Using the VID and PID

• VID: 0x0BB4: This is assigned to Google Inc. usb vid0bb4 amppid0c01 verified

• PID: 0x0C01: This corresponds to a specific Google device.

Verdict

A common OEM USB VID/PID pair from Foxconn likely representing a debug/serial/ADB or accessory interface; functional and "verified" for recognition, but exact capabilities depend on device firmware and vendor-supplied drivers. VID (Vendor ID): 0BB4 PID (Product ID): 0C01

Related search suggestions:

• "VID 0BB4 PID 0C01 device identification" (0.9)
• "Foxconn USB VID 0BB4 list of PIDs" (0.8)
• "how to install ADB drivers Windows" (0.7)

2. Device Identification

Advanced: Editing the Driver INF for Custom PIDs

Developers and power users sometimes need to modify android_winusb.inf to add VID_0BB4&PID_0C01 if it's missing. Here’s how: This information is crucial for identifying a USB

1. Open android_winusb.inf in Notepad.
2. Under [Google.NTx86] and [Google.NTamd64], add:

   ;NVIDIA Shield Tablet Fastboot
   %SingleBootLoaderInterface% = USB_Install, USB\VID_0BB4&PID_0C01
   

3. Save the file and reinstall the driver via Device Manager.
4. Windows will then mark it as verified (since the base driver is signed).

Troubleshooting “Verified” But Device Not Working

If the driver shows “verified” but fastboot devices returns nothing:

• Ensure you are using the original USB cable (data, not charge-only).
• Try a different USB port (USB 2.0 preferred over 3.0).
• Update to the latest Google USB Driver or libusb (for Zadig on Windows).
• On Linux/macOS, no driver is needed – run fastboot devices with sudo or proper udev rules.