Let op: je bekijkt onze website op een verouderde browser. Hou er rekening mee dat bepaalde onderdelen van de website niet goed getoond worden.

Voor 18:00 uur besteld, morgen in huis
Gratis verzending vanaf €50
Verlengde retourtermijn t/m 31 januari 2026
Wij krijgen een 4,8/5 van onze klanten
WishlistInloggenWinkelwagen

V300cd-pro Software ((new)) -

V300CD-PRO (also known as the i-Copy V300CD-PRO ) is a handheld RFID copier and duplicator. While the hardware handles basic cloning, its dedicated PC Software

(NFC PM-Pro) provides advanced features for deep analysis and manipulation of RFID data.

Here is a breakdown of a primary "Program Feature" you can use or create within the software: Feature: DataCompare (Dump Comparison) One of the most powerful features in the V300CD-PRO software DataCompare What it does

: It allows you to compare "dumped" data (binary information) between two different RFID cards or tags. How to use it Read and Dump HighFreqCard LowFreqCard

modules to read your original card and save the data to your PC. Select Files : Open the DataCompare

tool and load the data file from the original card and the data file from a second card (or a modified version of the first). Analyze Differences

: The software highlights specific sectors or blocks where the data differs. This is essential for identifying rolling codes or specific encrypted values that change after use. Other Core Software Features

The software also includes these standard functional modules: HighFreqCard v300cd-pro software

: Specialized tools for reading, writing, and cracking encryption on cards (e.g., Mifare). LowFreqCard : Tools for duplicating common 125 KHz to 1000 KHz ID cards and tags. Sector Editing

: Advanced users can manually edit specific sector data before writing it to a new tag. System Update Center

: Used to keep the device's firmware and decoding libraries current. How to Access the Software The software is conveniently stored on the device itself: Connect the V300CD-PRO to your PC via Stay on the Disclaimer screen (do not press 'OK') to enter "U-Disk mode". Open the new drive on your computer and run NFC PM-ProEnInstall.exe step-by-step guide on how to crack an encrypted card using this software? SYNACORP RFID Copier Duplicator i-Copy V300CD-PRO

i-Copy V300CD-PRO software, typically identified as NFC PM-Pro

, is the official PC-based utility for managing and cloning RFID/NFC cards. It is primarily used for advanced card decoding, data analysis, and firmware updates. device.report Core Software Features

The software is divided into specific modules based on card frequency and functional needs: HighFreqCard : Designed for

cards (such as MIFARE S50/S70). It supports decoding, reading, writing, and performing "brute-force" attacks to find sector keys. LowFreqCard : Used for 125 kHz to 1000 kHz V300CD-PRO (also known as the i-Copy V300CD-PRO )

cards (such as EM4305, T5577, and HID). This module allows for direct reading and writing of low-frequency ID tags. DataCompare

: A utility to import and compare "dumped" data from two different cards to identify differences in their internal memory. System/Update Center

: Allows users to check the current client and device versions and download the latest official firmware. Installation & Connection Guide

The software is usually stored directly on the device's internal memory (U-Disk mode). device.report Connect to PC

: Use the provided Micro USB cable to connect the V300CD-PRO to your Windows computer. U-Disk Mode : Power on the device but stay on the Disclaimer menu

(do not press OK yet). This allows the PC to recognize it as a storage drive. Run Installer : Open "This PC," locate the new drive, and run NFC PM-ProEnInstall.exe Finalize Link : Once installed, launch the program and then press

on the device screen. The software should display "USB Connected...". Synacorp Technologies Sdn. Bhd. Device Compatibility Supported Frequencies 3.2 User Workflows

: 125KHz, 250KHz, 375KHz, 500KHz, 625KHz, 750KHz, 875KHz, 1000KHz, and 13.56MHz. OS Support : The software is designed for environments. device.report

Based on the specific model name "v300cd-pro," this guide focuses on the software ecosystem surrounding the V300CD-Pro RFID Desktop Reader, commonly manufactured by Chafon and rebranded by various IoT suppliers.

This device is a UHF RFID Integrated Reader, distinct from standard readers because it contains a built-in antenna and is designed for desktop use (inventory management, library stations, jewelry management, or point-of-sale systems).

Here is an informative guide regarding the software, protocols, and development tools associated with the V300CD-Pro.

3.2 User Workflows

Phase 4: Post-Processing

Click Generate G-Code. The software will output a .nc or .txt file. Always review the first 10 lines of code. Look for G21 (mm) or G20 (inches) to ensure units are correct.

5. Customizable Post-Processors

The v300cd-pro software supports generic GRBL, Mach3, and LinuxCNC controllers out of the box. For advanced users, the "Post-Processor Editor" allows you to tweak G-code syntax to match proprietary industrial controllers.