Yayusi S2 User Manual |best| -
Since physical manuals included with budget smartwatches are often very brief or poorly translated, I have compiled a comprehensive Unofficial User Guide below. This guide covers the standard functions and setup process for the Yayusi S2 series.
6. Troubleshooting Common Issues
| Problem | Solution |
| :--- | :--- |
| Watch won't turn on | Battery may be fully drained. Charge it for at least 10 minutes before trying to turn it on. |
| Cannot receive calls/messages | 1. Ensure the Bluetooth icon on the watch is "Connected".
2. Check if "Do Not Disturb" mode is off on the watch.
3. Ensure the app has Notification Permission in your phone settings. |
| Heart rate inaccurate | Wear the watch tighter. Do not wear it on the wrist bone. Ensure the sensor on the back is clean. |
| Watch disconnected often | Go to your phone's Bluetooth settings, "Forget" the device, and re-pair it through the app. | yayusi s2 user manual
Important Note on Waterproofing: The Yayusi S2 is typically rated IP68 or 3ATM. This means it is splash-proof and rain-proof. You can wash your hands with it, but do not wear it while swimming or in a hot shower/bath, as hot water and steam can damage the seals. Since physical manuals included with budget smartwatches are
If you cannot find the specific app for your device, check the packaging box or the manual provided in the box for a specific QR code, as app names can change with different hardware batches. Important Note on Waterproofing: The Yayusi S2 is
Chapter 3: Daily Operation – How to Use Every Feature
The Yayusi S2 user manual divides functions into three main modes: Monitoring, Data Sync, and Standby.
Specifications (typical / example)
- Bluetooth: 5.0
- Drivers: 45 mm full-range (example)
- Output power: 5–10 W RMS
- Battery: 1200–2000 mAh (typical)
- Charging: 5 V/1 A, 2–4 hours
- Weight: ~200–400 g
- Dimensions: compact portable (model dependent)
4. Troubleshooting Common Issues (Manual Excerpts)
| Problem | Likely Solution (from manual) | |---------|-------------------------------| | Won’t turn on | Charge for 30 mins; try soft reset (hold button 10s) | | Bluetooth not connecting | Unpair from phone settings → Re-pair via app only | | Heart rate inaccurate | Wear snugly, 1 finger above wrist bone | | Screen frozen | Press and hold button for 15 seconds to force reboot | | No notifications | Check app permissions → Enable “Display over other apps” |
Warranty Terms:
- 12 months against manufacturing defects.
- Does not cover: water damage (unless IP68 certified), cracked screens, lost accessories, or battery degradation over time.